Introduction
The ORIA WS02 Wireless Bluetooth Temperature and Humidity Sensor is a compact device designed for monitoring environmental conditions indoors and outdoors. It utilizes Bluetooth 5.0 technology to connect with a dedicated mobile application, allowing users to track temperature and humidity data, set alerts, and export historical records. This manual provides essential information for the proper setup, operation, and maintenance of your sensor.
Product Overview
Figure 1: ORIA WS02 Sensor and Mobile Application Interface
The ORIA WS02 sensor is a small, square-shaped device, approximately 50mm (1.97in) in length and width, and 15mm (0.59in) thick. It features a central button for interaction and a small opening for a wrist strap. The device is powered by a replaceable CR2477 battery, offering an endurance of approximately 365 days.
Figure 2: Sensor Dimensions and Battery Life
Setup Guide
- **Download the App**: Scan the QR code provided in the product packaging or search for "Sensor Blue" in the App Store (for iOS) or Google Play Store (for Android) to download the companion application.
- **Activate the Sensor**: Gently pull out the battery insulation sheet from the sensor. This activates the CR2477 battery.
- **Enable Bluetooth**: Ensure Bluetooth is enabled on your smartphone.
- **Open "Sensor Blue" App**: Launch the "Sensor Blue" application on your device.
- **Connect the Product**: Within the app, navigate to the "Add device" option. Press the physical button on the sensor once to initiate pairing. The app should detect and connect to the sensor.
- **Name Your Sensor**: Once connected, you can name your sensor (e.g., "Office", "Bedroom", "Kitchen") within the app for easy identification.
- **Set Alarm Alerts**: Configure desired temperature and humidity ranges in the app. The app can provide alerts if readings fall outside these ranges.
Figure 3: Initial Setup Steps
Important Note for Android Users: For successful connection, ensure that location services (geolocation) are enabled on your Android phone when connecting to the sensor.
Video 1: ORIA Mini Bluetooth Thermometer Setup and Features Demonstration
Operating Instructions
- **Real-time Monitoring**: View current temperature and humidity readings directly on the "Sensor Blue" app. The sensor refreshes data once per second for high accuracy.
- **Temperature and Humidity Range**:
- Temperature: -20°C to 65°C (-4°F to 150°F) with an accuracy of ±0.5°C (±1°F).
- Humidity: 0-100% RH with an accuracy of ±5% RH.
- **Data Logging and Storage**: The sensor records a group of data every 10 seconds and can store up to 100 days of historical data. This data can be viewed as charts or lists within the app.
- **Data Export**: You can export the stored temperature and humidity data in CSV format directly from the app for further analysis.
- **Alarm Functionality**: If the temperature or humidity exceeds the preset ranges, the app will display readings in red and can trigger an alarm alert on your phone.
- **Bluetooth Connectivity**: The sensor maintains a stable Bluetooth 5.0 connection with your smartphone up to 50 meters (164 feet) in an unobstructed environment.
Figure 4: Sensor Measurement Specifications
Figure 5: Data Logging and Storage Capabilities
Maintenance
- **Battery Replacement**: The sensor uses a replaceable CR2477 battery. When the battery level is low, replace it to ensure continuous operation. The battery typically lasts about 1 year.
- **Cleaning**: Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.
- **Storage**: Store the sensor in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Sensor not connecting to app (Android) | Ensure your phone's location services (geolocation) are enabled. This is often required for Bluetooth scanning on Android. |
| Inaccurate readings or no data |
|
| Short battery life in cold environments | Battery performance can be significantly reduced in very low temperatures (below -10°C). Consider this when deploying in cold conditions. |
| Sensor not suitable for wet environments | The sensor is not waterproof. Do not use it for permanent underwater temperature measurements or in highly humid environments where it might get wet. |
Specifications
| Feature | Detail |
|---|---|
| Model | WS02 |
| Brand | ORIA |
| Product Type | Temperature Humidity Meter |
| Material | Plastic |
| Dimensions (L x W x H) | 50mm x 50mm x 15mm (1.97in x 1.97in x 0.59in) |
| Connectivity | Bluetooth 5.0 |
| Wireless Range | Up to 50m (164ft) without obstructions |
| Temperature Range | -20°C to 65°C (-4°F to 150°F) |
| Temperature Accuracy | ±0.5°C (±1°F) |
| Humidity Range | 0-100% RH |
| Humidity Accuracy | ±5% RH |
| Response Time | Up to 1 second |
| Data Logging Interval | Every 10 seconds |
| Data Storage Capacity | Up to 100 days |
| Battery Type | CR2477 (replaceable) |
| Battery Endurance | Approx. 1 year |
| App Compatibility | Android 4.3 or above, iPhone 4s or above |
User Tips
- For optimal connectivity on Android devices, ensure your phone's location services are active when pairing or connecting to the sensor.
- While versatile for indoor/outdoor use, avoid direct exposure to water or extreme moisture as the device is not waterproof.
- Be mindful of battery life in very cold conditions; temperatures below -10°C can significantly reduce battery endurance.
- Utilize the app's data export feature to keep long-term records of environmental conditions for analysis or compliance.
Warranty and Support
For specific warranty details and terms, please refer to the documentation provided at the time of purchase or contact the seller directly. Technical support and further assistance can be accessed through the "Sensor Blue" mobile application or by contacting ORIA customer service.