Taidacent FS-IR02

Contents

Taidacent FS-IR02 Optical Infrared Water Liquid Level Sensor

Instruction Manual

1. Introduction

The Taidacent FS-IR02 is a compact and highly accurate optical infrared liquid level sensor designed for reliable water level control and leak detection. This sensor utilizes an optical principle to detect the presence or absence of liquid, offering high reliability and a long lifespan. Its robust design, featuring a stainless steel body and wired connection, makes it suitable for a wide range of applications including humidifiers, air-conditioning fans, steam systems, and other devices requiring precise liquid level monitoring and protection.

Taidacent FS-IR02 Optical Infrared Water Liquid Level Sensor

Figure 1: Taidacent FS-IR02 Optical Infrared Water Liquid Level Sensor

2. Specifications

Parameter Value
Model Number TDJLFSIR02 (FS-IR02)
Output Current 12 mA
Working Temperature -25°C to 105°C
Material PC (Polycarbonate)
Measuring Range Unlimited (critical judgment)
Type Photoelectric level switch
Measurement Accuracy ±0.5mm
Certification None
Origin Mainland China

3. Features

  • Compact Structure and Small Size: Requires minimal installation space, simplifying the setup process.
  • High Liquid Level Control Accuracy: Achieves precision within ±0.5mm, significantly higher than traditional float-type switches.
  • High Reliability and Long Life: Designed without friction or mechanical moving parts, ensuring consistent performance and extended operational life.
  • Versatile Installation: Can be installed upside down, right side up, sideways, or diagonally, offering greater flexibility compared to float switches.
  • Easy to Clean: Features a smooth sensor head that resists accumulation and is simple to maintain.
  • Enhanced Safety: Live electrical parts are completely isolated from the controlled liquid, eliminating safety hazards.
  • Cost-Effective: Offers a low-price solution for accurate liquid level detection.

4. Setup and Installation

The FS-IR02 sensor is designed for straightforward installation due to its compact size. It can be mounted in various orientations to suit your application needs.

4.1 Mounting Options

The sensor can be installed from the top, bottom, side, or at an angle. Ensure the sensor head is positioned where liquid level detection is required. Use the provided lock nut and rubber sealing ring to secure the sensor and ensure a watertight seal.

Installation diagrams showing various mounting positions for the liquid level sensor

Figure 2: Various Mounting Positions

4.2 Wiring Diagram

Connect the sensor according to the typical application circuit diagram. The sensor operates on a DC5V power supply. The terminal wire consists of four colors: Red, Yellow, Blue, and White.

Technical diagram including dimensional drawing of the sensor and a DC5V typical application circuit with wiring details

Figure 3: Dimensional Drawing and DC5V Typical Application Circuit

  • Red Wire: Power input (+5V)
  • Blue Wire: Ground (GND)
  • Yellow Wire: Output signal
  • White Wire: (Typically unused or secondary ground/control, refer to specific product documentation if available for detailed function)

Ensure all connections are secure and insulated to prevent short circuits or water ingress.

5. Operating Instructions

The FS-IR02 sensor operates on the principle of optical refraction. An LED inside the sensor emits light towards a prism. The detection of liquid level is determined by how this light interacts with the prism surface.

Diagram illustrating the optical sensing principle: light reflection when no liquid is present and light loss when liquid is present

Figure 4: Optical Sensing Principle

  • No Liquid Present: When the sensor head is in air, the light from the internal LED is reflected internally within the prism and directed back to the receiver. This indicates a 'dry' state.
  • Liquid Present: When the sensor head is immersed in liquid, the light from the LED refracts out into the liquid, causing less light to be reflected back to the receiver. This indicates a 'wet' state.

The sensor's output signal (Yellow wire) changes based on these states, allowing your control system to detect the liquid level. The sensor provides a critical judgment of the liquid presence at its detection point.

6. Maintenance

The Taidacent FS-IR02 sensor requires minimal maintenance due to its robust design and lack of moving parts.

  • Cleaning: The sensor head is smooth and designed for easy cleaning. Periodically inspect the sensor head for any buildup of residue, scale, or debris, especially in environments with hard water or contaminants. Clean the sensor head gently with a soft cloth and mild detergent if necessary. Avoid abrasive materials or harsh chemicals that could scratch the prism surface.
  • Inspection: Regularly check the wiring and connections for any signs of wear, corrosion, or damage. Ensure the lock nut and rubber sealing ring remain tight to prevent leaks.

7. Troubleshooting

If the sensor is not functioning as expected, consider the following troubleshooting steps:

  • No Output/Incorrect Reading:
    • Verify the power supply (DC5V) is correctly connected to the Red and Blue wires and is within the specified voltage range.
    • Check all wiring connections for looseness or damage.
    • Ensure the sensor head is clean and free from any obstructions or buildup that might interfere with the optical detection.
    • Confirm the sensor is correctly positioned at the desired detection level.
  • Intermittent Readings:
    • Check for air bubbles or foam around the sensor head, which can cause false readings.
    • Ensure the liquid is not excessively turbulent at the sensor's location.
    • Inspect for any loose connections in the wiring.
  • Leakage at Installation Point:
    • Ensure the rubber sealing ring is properly seated and undamaged.
    • Tighten the lock nut sufficiently to create a secure seal, but do not overtighten.

If issues persist after these steps, contact customer support for further assistance.

8. User Tips

  • For optimal performance, install the sensor in a location where liquid flow is relatively calm to avoid false triggers from splashing or turbulence.
  • When installing in a tank, consider using a small baffle or shield around the sensor if the liquid level is prone to rapid fluctuations.
  • Regularly check the sensor's functionality during routine equipment maintenance to ensure continuous and reliable operation.

9. Warranty and Support

For technical support, warranty claims, or any questions regarding the Taidacent FS-IR02 sensor, please contact the seller or manufacturer directly. Keep your purchase records for any warranty-related inquiries.

Manufacturer/Seller: Shenzhen Taida Century Company Store

Contact information can typically be found on your purchase invoice or the seller's official store page.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.