FLAMMA FS02

Contents

FLAMMA FS02 Reverb Pedal Instruction Manual

Stereo Electric Guitar Effects Pedal with Reverb

1. Introduction

The FLAMMA FS02 Reverb Pedal is a compact and versatile digital reverb effects pedal designed for electric guitars. It offers seven distinct reverb effects, high-quality stereo input and output, storable presets, and a 'Trail On' function for natural effect fade-out. This manual provides detailed instructions for setting up, operating, and maintaining your FS02 Reverb Pedal.

2. Features

  • 7 classic reverb effects
  • High-quality stereo input and output
  • Storable preset slot for each effect
  • 'Trail On' function allows effects to fade out naturally
  • True bypass circuitry

3. Package Contents

Please check the package for the following items:

  • 1 x FLAMMA FS02 Reverb Effects Pedal
  • 1 x Safety Instruction & Warranty Card
  • 1 x Sticker
Diagram showing the contents of the FLAMMA FS02 Reverb Pedal package.
Figure 1: Package Contents - FS02 Reverb Pedal, Safety Instruction & Warranty Card, Sticker.

4. Controls and Functions

Diagram of the FLAMMA FS02 Reverb Pedal layout with labels for each control knob, footswitch, and LED indicator.
Figure 2: FS02 Reverb Pedal Layout
  • HI-CUT: Rotate to adjust high frequency cut.
  • LEVEL: Rotate to adjust the volume level of the effect.
  • LO-CUT: Rotate to adjust low frequency cut.
  • DECAY: Rotate to adjust the decay rate of the reverb effect.
  • PRE-DLY: Rotate to adjust the pre-delay timing.
  • SAVE/SELECT Button: Press to switch between effects. Press and hold to save settings of current effect.
  • Footswitch LED: Indicates pedal on/off. When 'Trail On' is active, the LED will be blue. When 'Trail On' is off, the LED will be red.
  • 1-7 LED Indicator: Indicates the currently selected reverb effect (1 through 7).
  • Footswitch: Press to turn the pedal on/off.

4.1 Reverb Effects List

The FS02 offers 7 distinct reverb types:

Table listing 7 reverb types and their descriptions: Room, Hall, Church, Cave, Plate, Spring, Mod.
Figure 3: Reverb Effects List
NumberReverb TypeDescription
1RoomSmall-room reverb with fast decay
2HallLarge, spacious concert hall reverb
3ChurchOpen reverb with mild shimmer
4CaveLarge cave-like reverb
5PlateStudio-style plate reverb
6SpringClassic spring reverb tank
7ModReverb with modulation effect

5. Setup

5.1 Power Supply

The FS02 Reverb Pedal requires a DC 9V 300mA center negative power supply. Please use a power supply with 9V and at least 210mA current value. Incorrect power supply may cause short-circuit and damage to the unit. The power supply is not included in the package.

5.2 Connecting Your Pedal

The FS02 supports both mono and stereo input/output configurations.

  1. Connect your guitar or other instrument to the INPUT-L (MONO) jack. For stereo input, connect a second instrument or stereo source to the INPUT-R jack.
  2. Connect the OUTPUT-L (MONO) jack to your amplifier or audio interface. For stereo output, connect the OUTPUT-R jack to a second amplifier or stereo input.
  3. Connect the 9V DC power supply to the power input jack.
FLAMMA FS02 Reverb Pedal with stereo input and output connections, illustrating its high-quality stereo sound capability.
Figure 4: Stereo Input and Output Connections

6. Operating Instructions

6.1 Turning On/Off

Plug in the 9V power supply and press the footswitch to turn the pedal on. The footswitch LED will illuminate.

6.2 Selecting Reverb Effects

Press the SAVE/SELECT button to cycle through the 7 different reverb effects. The 1-7 LED indicator will show the currently selected effect.

6.3 Adjusting Parameters

Use the LEVEL, HI-CUT, LO-CUT, DECAY, and PRE-DLY knobs to fine-tune the sound of the selected reverb effect.

6.4 Saving Presets

To save your current settings for an effect:

  1. Adjust the knobs to your desired sound.
  2. Press and hold the SAVE/SELECT button.
  3. The LED indicator will blink swiftly to confirm that the saving is successful.

If any changes are made to a saved preset, the LED indicator will blink slowly, indicating that the changes have not yet been stored. Pressing the SAVE/SELECT button quickly will change to the next effect without saving the current modifications.

Close-up of the FLAMMA FS02 Reverb Pedal showing the SAVE/SELECT button and the 1-7 LED indicators for storable presets.
Figure 5: Storable Presets and SAVE/SELECT Button

6.5 Trail On Function

The 'Trail On' function allows the reverb effect to fade out naturally after the pedal is disengaged, preventing an abrupt cut-off. To activate or deactivate this function:

  1. Power off the pedal.
  2. Press and hold the footswitch while powering on the pedal.
  3. The SAVE/SELECT button will turn blue when 'Trail On' is active and red when 'Trail On' is deactivated.
FLAMMA FS02 Reverb Pedal with 'Trail On' function text, showing the effect fading out naturally.
Figure 6: Trail On Function

6.6 True Bypass

The FS02 features true bypass circuitry, which ensures that your guitar's signal remains unaffected when the pedal is disengaged, preserving your tone without any signal loss.

FLAMMA FS02 Reverb Pedal connected in a pedalboard setup, highlighting its true bypass feature to reduce signal loss.
Figure 7: True Bypass for Signal Integrity

7. User Tips

  • Versatility: This pedal is versatile and can be used with various instruments, including electric guitars and even electronic pianos, to add subtle or pronounced reverb effects.
  • Stereo Sound: For a truly immersive and realistic room reverberation effect, utilize the stereo input and output capabilities.
  • Preset Management: Take advantage of the storable presets to quickly recall your favorite reverb settings for different songs or styles.
  • Tone Preservation: The true bypass feature ensures your original tone is maintained when the effect is off.
  • Power Supply: Always use a 9V DC center negative power supply with at least 210mA to avoid damage.

8. Troubleshooting

8.1 No Sound or Weak Signal

  • Check all cable connections to ensure they are secure and correctly plugged into the input and output jacks.
  • Verify that the power supply is correctly connected and providing the specified 9V DC center negative power.
  • Ensure the volume (LEVEL) knob on the pedal is not set to minimum.
  • If using other pedals, temporarily bypass them to isolate the issue.

8.2 Unexpected Noise

  • Ensure you are using a regulated 9V DC center negative power supply. Unregulated power supplies can introduce noise.
  • Check for faulty cables or connections.
  • Move the pedal away from other electronic devices that might cause interference.

8.3 Effect Not Engaging/Disengaging

  • Press the footswitch firmly to ensure proper engagement.
  • Check the footswitch LED indicator for its status (blue/red for Trail On, or simply on/off).

8.4 Settings Not Saving

  • Ensure you press and hold the SAVE/SELECT button until the LED indicator blinks swiftly to confirm the save operation.

9. Specifications

AttributeValue
Brand NameFLAMMA
Model NumberFS02
TypeGuitar Pedal Reverb Effects
Power SupplyDC 9V 300mA Center negative
Dimensions (L x W x H)121.5mm x 69.82mm x 50.65mm (4.78" x 2.75" x 1.99")
Weight0.298KG
Input2*1/4" mono jack (Impedance value: 4.7M ohms)
Output2*1/4" mono jack (Impedance value: 100 ohms)
Is Batteries IncludedNo
CertificationCE, FCC
Diagram showing the dimensions of the FLAMMA FS02 Reverb Pedal: 121.5mm (4.78 inches) length, 69.82mm (2.75 inches) width, and 50.65mm (1.99 inches) height.
Figure 8: Product Dimensions

10. Warranty and Support

All FLAMMA products come with a 1-year warranty. For any questions or support needs, please contact the seller directly. They aim to reply within 24 hours.

11. Product Demonstration

Video 1: Demonstration of the FLAMMA FS02 Reverb Pedal's various effects and features with a guitar.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.