Estardyn 12864-06D

Contents

Estardyn 12864-06D LCD Module Instruction Manual

Model: GMG12864-06D

1. Product Overview

The Estardyn 12864-06D is a compact 128x64 dot matrix LCD module designed for various embedded applications. It features a COG (Chip-On-Glass) construction, an ST7565R driver IC, and communicates via an SPI interface. This module also includes support for Simplified Chinese fonts, making it versatile for projects requiring multi-language display capabilities. It is available in different screen colors including gray, blue, and black.

Estardyn 12864-06D LCD Module in various screen colors
Estardyn 12864-06D LCD Module showing different screen color options (gray, blue, black).
Animated GIF showing text display on the LCD module
Animated demonstration of text being displayed on the LCD module.

2. Specifications

FeatureSpecification
Model Number12864-06D (GMG12864-06D)
Display Resolution128 x 64 Dots
Driver ICST7565R
Interface ModeSPI Interface
Display TypeFSTN & Positive
Polarizer ModeTransflective
Viewing Direction6 o'clock
Operating Voltage3.3V
Operating Temperature-20°C to +70°C
Storage Temperature-30°C to +80°C
Module Dimensions (PCB)51.80 x 45.80 mm (approx. 61.8 x 45.8 x 6.8 mm overall)
Viewing Area (V.A)58.00 x 27.80 mm
Active Area (A.A)48.60 x 24.20 mm
Connector TypeCOG (Chip-On-Glass)
Backlight TypeLED / Side / White
Font SupportSimplified Chinese

3. Pinout and Interface

The 12864-06D LCD module utilizes a 13-pin SPI interface for communication with a microcontroller. Below is the pinout description, which is essential for proper connection and operation.

Technical drawing of the 12864-06D LCD module with dimensions and pinout table
Technical drawing showing module dimensions and pin assignments.
Pin No.SymbolDescription
1/CSChip Select (Active Low)
2RESReset (Active Low)
3RSData/Command Select
4SCLSerial Clock
5SISerial Data Input
6VDDPower Supply (3.3V)
7GNDGround
8LEDALED Anode (Backlight +)
9LEDKLED Cathode (Backlight -)
10IC_CSInternal Chip Select (typically tied to VDD or GND if not used externally)
11IC_SCKInternal Serial Clock (typically tied to VDD or GND if not used externally)
12IC_SDOInternal Serial Data Output (typically tied to VDD or GND if not used externally)
13IC_SDIInternal Serial Data Input (typically tied to VDD or GND if not used externally)

Note: Pins 10-13 (IC_CS, IC_SCK, IC_SDO, IC_SDI) are typically for internal use or specific configurations. For standard SPI communication, focus on pins 1-9.

Back view of the LCD module showing the PCB and FPC connector
Rear view of the LCD module, highlighting the FPC connector and PCB layout.

4. Setup Instructions

To set up your Estardyn 12864-06D LCD module, follow these general steps:

  1. Power Connection: Connect the VDD pin (Pin 6) to a 3.3V power supply and the GND pin (Pin 7) to ground. Ensure your power supply is stable and within the specified voltage range.
  2. SPI Interface Connection: Connect the SPI pins from your microcontroller to the corresponding pins on the LCD module:
    • Microcontroller's Chip Select (CS) to LCD's /CS (Pin 1)
    • Microcontroller's Reset (RST) to LCD's RES (Pin 2)
    • Microcontroller's Data/Command (DC or A0) to LCD's RS (Pin 3)
    • Microcontroller's Serial Clock (SCK) to LCD's SCL (Pin 4)
    • Microcontroller's Serial Data Out (MOSI) to LCD's SI (Pin 5)
  3. Backlight Connection: Connect LEDA (Pin 8) to the positive terminal of your backlight power source (typically 3.3V, possibly through a current-limiting resistor if required by your setup) and LEDK (Pin 9) to ground.
  4. Software Library: For programming, consider using a compatible graphics library such as U8g2, which is known to work with ST7565R controllers. Install the library in your development environment (e.g., Arduino IDE, PlatformIO).
  5. Initialization Code: Refer to the chosen library's documentation for the specific initialization sequence for the ST7565R controller. This typically involves setting up the SPI communication, initializing the display, and clearing the screen.
Example of the LCD module connected to a microcontroller on a breadboard
An example setup showing the LCD module connected to a development board on a breadboard.

5. Operating Instructions

Once the module is correctly wired and initialized, you can begin displaying content. The ST7565R controller supports various commands for drawing pixels, lines, rectangles, and text.

  1. Display Initialization: After power-up, the display must be initialized with a sequence of commands to set contrast, display mode, and other parameters. This is usually handled by the graphics library.
  2. Drawing Graphics: Use the functions provided by your chosen library (e.g., U8g2) to draw individual pixels, lines, circles, and other shapes.
  3. Displaying Text: The module supports displaying text, including Simplified Chinese characters, thanks to its font IC. Ensure your library supports the font set or load custom fonts if needed.
  4. Screen Refresh: Changes made to the display buffer in your microcontroller's memory need to be sent to the LCD module to be visible. This is typically done with a `display()` or `update()` command in the library.
  5. Backlight Control: The backlight can be controlled by applying or removing power to the LEDA/LEDK pins. Some advanced setups might use PWM for brightness control.

6. Troubleshooting

  • Display is blank or shows garbage:
    • Check all wiring connections, especially power (VDD, GND), SPI lines (/CS, RES, RS, SCL, SI), and backlight (LEDA, LEDK).
    • Verify that the 3.3V power supply is stable and correctly connected.
    • Ensure your microcontroller's code correctly initializes the ST7565R driver IC and sends the display data.
    • Confirm that the correct software library for the ST7565R is being used.
  • Backlight is not working:
    • Check the connections to LEDA and LEDK.
    • Ensure LEDA is connected to 3.3V (or appropriate voltage) and LEDK to GND.
    • If using a current-limiting resistor, verify its value and connection.
  • Slow screen refresh rate:
    • This module may exhibit a refresh rate of approximately 0.1 seconds per frame. This is a characteristic of the display technology and driver. Optimize your code to send updates only when necessary to minimize perceived lag.
  • Physical damage or broken components:
    • Upon receiving the module, carefully inspect it for any physical damage, such as broken jumpers or cracked glass. If damage is found, contact the seller immediately.
  • Visibility in sunlight:
    • The transflective polarizer mode generally offers good visibility in various lighting conditions, including sunlight. However, direct, intense sunlight might still reduce contrast.

7. User Tips

  • Software Library: Many users have successfully integrated this display with the U8g2 graphics library, which provides extensive functionality for monochrome displays.
  • Performance Expectation: Be aware that the display refresh rate can be around 0.1 seconds per frame. Plan your animations and screen updates accordingly for optimal user experience.
  • Compatibility: While versatile, ensure compatibility with your specific application (e.g., automotive onboard computers) by verifying the electrical and physical specifications match your requirements.
  • Careful Handling: The module is a delicate electronic component. Handle it with care to avoid physical damage, especially to the FPC connector and the glass display itself.

8. Warranty and Support

For any issues, technical support, or warranty claims, please contact the Estardyn Official Store directly through your purchase platform. Provide your order details and a clear description of the problem to facilitate a quick resolution.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.