TKXEC XY-KA15H

Contents

XY-KA15H Bluetooth 5.0 Wireless Audio Digital Power Amplifier Board User Manual

Model: XY-KA15H

1. Introduction

The XY-KA15H is a compact and versatile Bluetooth 5.0 wireless audio digital power amplifier board designed for stereo sound output. It features multiple input options including Bluetooth, AUX, U Disk, and Sound Card, and can be controlled via a mobile application. This manual provides detailed instructions for setting up, operating, and maintaining your amplifier board.

2. Safety Information

  • Ensure the power supply voltage is within the specified range of 8-24V DC. Using a voltage lower than 8V may prevent the amplifier chip from working, and a voltage higher than 26V will burn the circuit board.
  • Always connect speakers and power supply correctly before powering on the device.
  • Avoid exposing the device to moisture, extreme temperatures, or direct sunlight.
  • Do not attempt to disassemble or modify the amplifier board, as this may void the warranty and cause damage.

3. Package Contents

  • XY-KA15H Bluetooth Digital Power Amplifier Board
  • User Manual (this document)

Note: Power adapter and speakers are not included and must be purchased separately.

Individual carton packaging for XY-KA15H amplifier board
Figure 1: Individual carton packaging for the XY-KA15H amplifier board, showing dimensions (81mm x 68mm x 30mm) and weight (87g).

4. Product Overview

Front and back panel overview of the XY-KA15H amplifier board
Figure 2: Front and back panel overview of the XY-KA15H amplifier board, highlighting key features and ports.
Detailed diagram of XY-KA15H amplifier ports and controls
Figure 3: Detailed diagram showing the encoding potentiometer, Bluetooth status indicator, Type-C port, AUX input, Headphone output, DC power supply (8-24V), and Left/Right channel audio outputs for passive speakers.

Controls and Indicators:

  • Encoding Potentiometer: Rotate to adjust volume. Short press to receive/pause. Long press to power on/off.
  • Bluetooth Status Indicator: Blue LED indicates Bluetooth status.

Input Ports:

  • Type-C Port: For lossless U disk input and sound card input.
  • AUX Input: Standard audio input.

Output Ports:

  • Headphone Output: Connect active speakers or headphones.
  • Right Channel Audio Output (R): Connect passive speakers.
  • Left Channel Audio Output (L): Connect passive speakers.

Power Input:

  • DC Power Supply: 8-24V DC, interface 5.5*2.1 (compatible with 5.5*2.5).

5. Specifications

ParameterValue
Product Name20W+20W Stereo Bluetooth Digital Power Amplifier
Product ModelXY-KA15H
Supply VoltageDC: 8-24V (Higher voltage for greater output power)
Bluetooth Version5.0
Cool FeaturesSupport Sinilink-APP control
Input MethodBluetooth + AUX + U disk + USB sound card
Volume AdjustmentEncoder volume adjustment, smooth feel, one-key switch
Transmission Distance15 meters (unobstructed)
Number of ChannelsLeft and right two channels (stereo)
Adapted Speakers30W~200W, 4Ω, 8Ω, 16Ω
Protection MechanismPower reverse connection protection, short circuit protection, self-recovery overheating protection

Note: The output power of the power supply should be greater than the output power of the amplifier, otherwise it will affect the sound quality. If the output power is greater than 20W+20W, it is recommended to add a heat sink.

Output Power vs. Voltage:

  • 12V → 8Ω/10W+10W, 4Ω/16W+16W
  • 16V → 8Ω/15W+15W, 4Ω/more than 20W+20W
  • 20V → 8Ω/20W+20W, 4Ω/more than 20W+20W
  • 24V → 8Ω/30W+30W, 4Ω/more than 30W+30W

Product Dimensions:

Product dimensions of the XY-KA15H amplifier board
Figure 4: Product dimensions: 77mm (length) x 50mm (width) x 22mm (height), with knob height of 7mm and knob diameter of 12mm.

6. Setup Instructions

6.1 Power Supply Connection

  1. Obtain a DC power adapter with an output voltage between 8V and 24V. A standard 12V/24V power adapter with a 5.5-2.1/2.5 power plug is recommended.
  2. Ensure the current output of the power adapter is greater than 2A.
  3. Connect the DC power adapter to the DC power supply port on the back of the amplifier board (refer to Figure 3).

6.2 Speaker Connection

The amplifier can continuously output 20W*2 power. It is recommended to use 8 ohm or 4 ohm speakers with a power rating between 10W and 200W.

  1. For passive speakers, connect the right channel speaker to the 'R' output terminals and the left channel speaker to the 'L' output terminals on the back of the board (refer to Figure 3). Ensure correct polarity (+ to + and - to -).
  2. For active speakers or headphones, connect them to the 'Audio Output' (Headphone output) jack on the front of the board (refer to Figure 3).

6.3 Audio Input Connection

  • AUX Input: Connect an audio source (e.g., smartphone, MP3 player) to the 'AUX Input' jack on the front of the board using a 3.5mm audio cable.
  • U Disk Input: Insert a USB flash drive into the 'USB Audio' (Type-C) port for direct playback (refer to Figure 5).
  • Sound Card Input: Connect the Type-C port to a computer for use as a sound card.
XY-KA15H amplifier supporting U disk playback
Figure 5: The XY-KA15H amplifier supports U disk playback via the Type-C port.

7. Operating Instructions

7.1 Power On/Off

Long press the encoding potentiometer (volume knob) to power the device on or off.

7.2 Volume Control

Rotate the encoding potentiometer to adjust the volume. The volume can also be controlled via the mobile APP.

7.3 Bluetooth Pairing

  1. When the Bluetooth board is powered on, the blue LED indicator will flash quickly, indicating it is in Bluetooth connection mode.
  2. On your mobile phone, search for Bluetooth devices and select "XinYi" to complete the connection.
  3. Once connected, the blue LED will enter a steady light state.
  4. Open your mobile phone's music player to play audio. During playback, the blue LED will flash slowly.
Bluetooth pairing steps for XY-KA15H amplifier
Figure 6: Bluetooth pairing process, showing the device name "XinYi" on a mobile phone.

7.4 Input Mode Switching

The product is powered on by default in Bluetooth mode. Input modes can be switched automatically or via the mobile APP:

  • AUX Input: Plugging in an AUX cable will automatically switch the amplifier to AUX input mode.
  • U Disk Playback: Inserting a U disk into the Type-C port will automatically switch to U disk playback mode.
  • Sound Card Input: Connecting the Type-C port to a computer for sound card functionality requires switching via the mobile APP.

The amplifier supports control via the Sinilink mobile application (Android and Apple systems).

  1. Ensure your phone is connected to the amplifier via Bluetooth (as described in 7.3).
  2. Open the Sinilink-APP.
  3. Follow the in-app instructions to connect to the Bluetooth device.
  4. The APP allows for visual operation, including volume adjustment, sound effects, track control (up/down song), play/pause, and mode switching.
Mobile APP control interface for XY-KA15H amplifier
Figure 7: Overview of the mobile APP control interface, showing options for volume, sound effects, song control, play/pause, and play mode.
Steps for connecting mobile phone APP to Bluetooth for XY-KA15H
Figure 8: Step-by-step guide for connecting the mobile phone APP to the amplifier via Bluetooth.

8. Troubleshooting

Common Issues and Solutions:

  • No Sound / Amplifier Not Working:
    • Power Supply: Check if the power supply voltage is within 8-24V DC. If below 8V, the amplifier chip may not work. If above 26V, the circuit board may be damaged.
    • Speaker Connection: Ensure speakers are correctly connected and functional.
    • Input Mode: Verify the correct input mode is selected (Bluetooth, AUX, U Disk, Sound Card).
  • Bluetooth Connection Issues:
    • Ensure the amplifier is in Bluetooth pairing mode (blue LED flashing quickly).
    • Make sure your mobile phone's Bluetooth is enabled and searching for devices.
    • Try restarting both the amplifier and your mobile device.
  • Sound Distortion or "Hiccup" Phenomenon during Playback:
    • Insufficient Power Supply: The most common cause. Ensure your power supply can provide enough current (recommended >2A) and voltage for your speakers.
    • Overheating: The amplifier has self-recovery overheating protection. If it overheats, strengthen heat dissipation or reduce the playback volume. Consider adding a heat sink if using high power output (e.g., >20W+20W).
    • Speaker Impedance/Power: Ensure your speakers are within the recommended range (4-16Ω, 10W-200W).

9. User Tips

  • APP Volume Control with AUX: Yes, you can change the volume via the Sinilink APP even when using the AUX input.
  • Power Supply Matching: Always use a power supply that can deliver sufficient power for your speakers. For example, if you plan to use the amplifier at its maximum rated output (20W+20W or higher), ensure your power supply is robust enough to prevent sound quality issues or

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.