1. Introduction
The ICANING G10 Smart Voice Remote Control is a versatile 2.4G wireless air mouse designed to enhance your control over various smart devices. It integrates a built-in 6-axis gyroscope, gravity acceleration sensor, and high-fidelity voice input, allowing it to function as a traditional remote control, a computer mouse, and a gaming motion controller. Its plug-and-play micro USB receiver ensures broad compatibility with personal computers, projectors, Android TV boxes, and other home entertainment equipment.
2. Package Contents
- 1 x G10 Smart Voice Air Mouse (AAA batteries not included)
- 1 x USB Receiver (located in the battery compartment)
- 1 x User Manual

3. Product Overview
3.1 Key Features
- 2.4G RF Wireless Connection
- Built-in 6-Axis Gyroscope (3-Gyro + 3-Gsensor for G10S Pro)
- Voice Search and Fidelity Microphone
- Infrared (IR) Learning Function (for Power button)
- Air Mouse Functionality
- Optional White Backlight (G10S Pro model)
3.2 Button Layout

- Power: On/Off button, also used for IR learning.
- Indicator: LED light for status.
- Mic: Microphone for voice input.
- Mouse On/Off: Activates/deactivates air mouse function.
- Play/Pause: Multimedia playback control.
- Directional Pad (Up/Down/Left/Right/OK): Navigation and selection.
- Home/Return: Go to home screen or return to previous screen.
- Menu: Access menu options.
- Backlit On/Off: Toggles backlight (G10S Pro only).
- Page Up/Down: Scroll pages.
- Volume +/-: Adjust volume.
- Voice Switch: Activates voice input.
- Mute: Mute/unmute audio.
- DEL (Backspace): Delete character or go back.
4. Setup
4.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment cover.

4.2 Connecting the USB Receiver
- Locate the USB receiver inside the remote control's battery compartment.
- Plug the USB receiver into an available USB port on your device (e.g., Smart TV, PC, Android TV Box).
- Wait for 20-60 seconds for your device to automatically install the necessary drivers.
- Once the driver installation is complete, move the remote control. If the mouse cursor appears and moves on the screen, the pairing is successful.
4.3 Manual Pairing (If Automatic Fails)
If the remote does not pair automatically:
- Press and hold the "OK" and "Home" buttons simultaneously on the remote control.
- The LED light on the remote will begin to flash.
- Release the buttons once the LED light stops flashing, indicating successful pairing.
5. Operating Instructions
5.1 Air Mouse Function
The G10 remote utilizes a gyroscope for motion sensing. Simply hold the remote and rotate your wrist to move the cursor across the screen. Press the "Mouse On/Off" button to activate or deactivate the air mouse function.

5.2 Voice Control
To use the voice control feature:
- Press the "Voice Switch" button on the remote control.
- Speak your command or search query into the microphone.
- Release the "Voice Switch" button when finished.
Note:
- For Android TV boxes, you may need to install a compatible voice assistant application (e.g., "goo... assitant") for the voice function to work correctly.
5.3 IR Learning Function
The G10 remote supports IR learning for the Power button only, allowing it to mimic the power function of another infrared remote control.

- Press and hold the [Power] button on the G10 remote for 3 seconds. The red indicator light will flash slowly, indicating it has entered the IR learning state.
- Point the infrared transmitter of your original remote control directly at the G10 remote's IR sensor (usually at the top).
- Press the [Power] button on your original infrared remote control. The G10 remote will receive the IR code, and its red indicator light will flash rapidly and then go out, signifying successful learning.
- The learned code will be automatically saved, and the remote will exit learning mode.
5.4 Adjusting Cursor Speed
The air mouse has three levels of cursor speed:
- From slow to fast: Press and hold the "OK" and "Volume+" buttons simultaneously. The speed adjusts one level when the LED light flashes.
- From fast to slow: Press and hold the "OK" and "Volume-" buttons simultaneously. The speed adjusts one level when the LED light flashes.
5.5 Backlight Function (G10S Pro only)
If you have the G10S Pro model, press the "Backlit On/Off" button to toggle the white backlight on or off for improved visibility in low-light conditions.
6. Maintenance
6.1 Battery Replacement
When the red indicator light flashes slowly, it indicates that the AAA battery power is below 2V and needs to be replaced. Follow the battery installation steps in Section 4.1.
6.2 Sensor Calibration
Changes in voltage or temperature may cause the cursor to drift. The G10 remote features automatic calibration. If you notice cursor drift, place the remote flat on a stable surface and keep it still. Press any key to wake it up if it is in hibernation mode, and it should recalibrate.
6.3 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
7. Troubleshooting
7.1 Remote Not Responding / Cursor Not Moving
- Ensure batteries are correctly installed and not depleted. Replace if necessary.
- Check if the USB receiver is securely plugged into your device.
- Try re-pairing the remote control by following the manual pairing steps in Section 4.3.
- Ensure no obstructions are blocking the signal between the remote and the USB receiver.
7.2 Voice Function Not Working
- The voice function may not be compatible with certain TV box models (e.g., TX3 mini, X96W (S905W), X92, X98 PRO, Magicsee N5, Fire TV/Stick, Xiaomi TV, Smart TV).
- For Android TV boxes, ensure you have installed a compatible voice assistant application (e.g., "goo... assitant").
- Verify that the microphone is not muted or blocked.
7.3 IR Learning Issues
- Only the Power button on the G10 remote can be programmed for IR learning.
- Ensure the original remote's IR transmitter is pointed directly at the G10 remote's IR sensor during the learning process.
- Make sure the original remote has sufficient battery power.
7.4 Compatibility with Smart TVs
- Some Smart TVs may block third-party USB dongles, which can affect the air mouse's compatibility. Confirm that your Smart TV can recognize third-party USB dongles and supports other remote controls besides its original one.
8. Specifications

| Feature | G10S | G10S Pro (with Backlight) |
|---|---|---|
| Connection | 2.4G RF Wireless | |
| Sensors | 6-Axis Gyroscope | Real 6-Axis Gyroscope (3-Gyro + 3-Gsensor) |
| Special Features | IR Learning, Microphone | Air Mouse, IR Learning, Microphone, White Backlight |
| Max Operating Distance | 8-10 meters | |
| Number of Keys | 17 | |
| Materials | Silicon keys + Plastic Shell | |
| Color | Black | |
| Battery Type | 2 x AAA Batteries (not included) | |
| Battery Voltage | 3.0V | |
| Mode | GFSK | |
| Frequency | 2.4GHz | 2400-2483.5MHz |
| Working Current | <15mA | |
| Standby Current | <20uA | |
| Product Dimensions (L x W x H) | 143 x 45 x 29 mm | 144 x 45 x 23 mm |
| Product Weight | 50g | 62g |
9. User Tips
- Before purchasing, verify the compatibility of the G10 remote's voice function and USB dongle with your specific Smart TV or Android TV box model. Some devices, like Vontar R3, may have specific compatibility requirements.
- For optimal voice control on Android TV boxes, ensure you have a compatible voice assistant app installed.
- Remember that only the power button on the G10 remote can learn IR codes from another remote.
- If the cursor feels unresponsive or drifts, place the remote on a flat surface for a few seconds to allow the gyroscope to recalibrate automatically.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official product page where you purchased the device. Keep your proof of purchase for any warranty claims.