1. Introduction
This manual provides instructions for the Universal TV Remote Control, designed as a replacement for original remote controls. It operates via Infrared (IR) communication and is compatible with a wide range of television models, including but not limited to: Bush 17 SB HD, Manta 65LUA58L, 32LHA59L, 19LHN38L, 24LFN37L, LED2802, LED94004, LED2803, FUjicom FJ-55U7, LED94005, LED3203, LED95001, LED3204, and 24LHN39L.
The remote control is ready to use upon battery installation for compatible models, requiring no complex programming.
2. Safety Information
- Keep batteries out of reach of children.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period.
- Dispose of batteries according to local regulations.
- Avoid exposing the remote control to extreme temperatures, direct sunlight, or moisture.
3. Package Contents
- 1 x Universal TV Remote Control (Black)
- Note: AA batteries are not included and must be purchased separately.
4. Specifications
| Feature | Detail |
|---|---|
| Model Numbers | LED4204, LED2206 |
| Compatible With | Bush 17 SB HD, Manta 65LUA58L, 32LHA59L, 19LHN38L, 24LFN37L, LED2802, LED94004, LED2803, FUjicom FJ-55U7, LED94005, LED3203, LED95001, LED3204, 24LHN39L |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Use | TV, Universal |
| Battery Type | 2 x AA (Not included) |
| Color | Black |
| Condition | New (Replacement) |
| Origin | Mainland China |
5. Setup
5.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or press the latch and lift to remove it.
- Insert two new AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
Image: Back of the remote control with the battery cover removed, revealing the AA battery compartment.
Image: Close-up of the battery compartment, showing the correct orientation for AA batteries.
Image: Back of the remote control with the battery cover securely in place.
5.2 First Use
This remote control operates using Infrared (IR) technology. For compatible TV models, it should function immediately after battery installation without any additional pairing steps. Simply point the remote control directly at your television and press the desired function button.
6. Operating Instructions
The remote control features a standard layout for TV functions. Refer to the image below for a visual guide to the buttons.
Image: Front view of the Universal TV Remote Control, displaying all functional buttons.
- POWER: Turns the TV on or off.
- MUTE: Mutes or unmutes the TV audio.
- 0-9 (Number Buttons): Directly select channels.
- INPUT: Cycles through available input sources (HDMI, AV, etc.).
- INFO: Displays on-screen information about the current program or input.
- MENU: Opens the TV's main menu.
- OK: Confirms selections within menus.
- Arrow Buttons (Up, Down, Left, Right): Navigate through menus and adjust settings.
- EXIT: Exits the current menu or on-screen display.
- VOL +/-: Adjusts the volume level.
- CH +/-: Changes the TV channel.
- HOME: Accesses the TV's smart home or main interface (if applicable).
- SETUP: Opens setup or settings menu.
- REFRESH: (Function may vary by TV model)
- MOUSE: (Function may vary by TV model)
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Control media playback (if supported by TV).
- Color Buttons (Red, Green, Yellow, Blue): Access specific functions within menus or applications, as indicated on-screen.
7. Maintenance
7.1 Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Do not use abrasive cleaners or immerse the remote in water.
7.2 Battery Replacement
Replace batteries when the remote control's performance degrades or it stops responding. Always replace both batteries at the same time with new AA batteries. Ensure correct polarity (+/-) during installation.
7.3 Storage
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
8. Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there is a clear line of sight between the remote control and the TV's IR receiver.
- Make sure no objects are blocking the IR sensor on the TV. - Buttons unresponsive:
- Some buttons may have specific functions depending on the TV model or current menu. Refer to your TV's user manual for specific button functionalities.
- If only certain buttons are unresponsive, try cleaning the remote control as described in Section 7.1. - Remote works intermittently:
- This could indicate low battery power. Replace the batteries. - Remote does not control TV:
- Verify that your TV model is listed as compatible. While this is a universal replacement, some specific models might require their original remote.
9. User Tips
- This remote control offers the convenience of replacing your original remote, especially if it's lost or damaged, and is compatible with a wide range of TV models.
- Always ensure fresh batteries are used for optimal performance.
10. Warranty and Support
10.1 Warranty
This product is supplied with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects but excludes human damages and damages caused by the failure or malfunction of your system.
10.2 Support
If you have any questions, concerns, or require assistance with your remote control, please contact the seller online or leave a message. Provide your product details and a clear description of the issue for prompt support.