MOES EU Smart Switch

Contents

MOES ZigBee Wireless 12 Scene Switch User Manual

Model: EU Smart Switch | Brand: MOES

1. Introduction

The MOES ZigBee Wireless 12 Scene Switch is a versatile 4-gang push-button controller designed to smart automate your Tuya smart devices. It allows you to set various scenes in the Smart Life App, providing convenient one-key control for your smart home. With its compact, wireless design, it offers flexibility in placement and usage without the need for complex wiring.

Note: A ZigBee hub is required for adding the switch and for normal operation. This device cannot be used alone without Tuya smart devices.

Note: This product does not support voice control.

2. Product Overview

MOES ZigBee Scene Switch product packaging
Figure 1: MOES ZigBee Scene Switch Product Packaging
Wireless Scene Switch features including remote control, scene setting, mechanical button, 1.3cm thickness, CR2430 3V input power, and 730 days battery life.
Figure 2: Key Features of the Wireless Scene Switch

3. Setup and Installation

3.1. Battery Installation

  1. Push the panel to the left to open the cover.
  2. Insert a CR2430 3V button battery into the battery slot. (Battery not included in package)
  3. Close the cover by pushing the panel back into place.
Video 1: Product demonstration, including battery installation and pairing process.

3.2. Pairing with ZigBee Gateway

  1. Ensure your ZigBee gateway is powered on and connected to the Smart Life App.
  2. Press and hold the reset button on the scene switch for 10 seconds until the indicator lights flash, indicating it's in pairing mode.
  3. Open the Smart Life App, navigate to your ZigBee gateway, and select 'Add Devices' or 'Associate nearby devices'.
  4. The app will discover the scene switch. Once found, confirm to add it.
  5. The device is successfully paired when the app confirms it.

3.3. Physical Installation

The scene switch can be easily installed anywhere using the provided double-sided tape. No complex wiring is needed.

Scene switch attached to a wooden cabinet using double-sided tape.
Figure 3: Easy installation with double-sided tape

4. Operating Instructions

4.1. Creating Smart Scenes in the App

The scene switch allows you to create various smart scenes in the Tuya Smart Life App. Each of the four buttons can be configured with three different conditions: single click, double click, and long press, enabling up to 12 distinct scenarios.

Smartphone screen showing the Tuya Smart App interface for adding intelligence to a Zigbee scene switch, with options for Button2, Button3, Button4 and an 'Add Intelligence' button.
Figure 4: Creating smart scenes in Tuya Smart App
Diagram showing a 4-gang scene switch with lines pointing to each button, indicating 'Single click', 'Double click', and 'Long press' conditions, next to a smartphone screen displaying 'Select Condition' options for single click, double click, and long press.
Figure 5: Three select conditions for each button
Diagram illustrating 12 scenes available for one 4 Gang switch with 3 select conditions supported. Each of the four buttons has options for 1.Click, 2.Double Click, and 3.Long press to start different scene modes.
Figure 6: 12 scenes available for one 4 Gang switch

4.2. Activating Scenes

  • Home Mode: Single press a configured button to turn on all your lights, air conditioners, fans, and other electronic devices when you arrive home.
  • A hand pressing a button on the scene switch, with a bedroom scene in the background showing lights, air conditioner, and curtains. Text reads 'One tap to home mode'.
    Figure 7: One tap to home mode
  • Away Mode: Double press a configured button to turn off all your lights, air conditioners, fans, and other electronic devices before leaving for work.
  • A hand double-pressing a button on the scene switch mounted on a wall next to a door. Text reads 'One-key for away mode'.
    Figure 8: One-key for away mode
  • Sleep Mode: Long press a configured button to turn off all your lights before sleeping.
  • A hand long-pressing a button on the scene switch placed on a bedside table, with a person sleeping in the background. Text reads 'Tap to run sleep mode'.
    Figure 9: Tap to run sleep mode
  • Wake-up Mode: Move your finger to the wall scene switch to start your day with a pleasant mood.
  • A person stretching in bed, with a scene switch on the wall. Text reads 'Wake-up Mode'.
    Figure 10: Wake-up Mode

4.3. Smart Linkage Diagram

Wiring diagram showing a Scene Switch wirelessly controlling various smart home devices like Smart Dimmer Switch, Smart Bulb, Smart Plug, Traditional Bulb, AC, Fan, and Smart Curtain.
Figure 11: Wireless Remote Control with Your Smart Home

5. Maintenance

5.1. Battery Replacement

The scene switch uses a CR2430 3V button battery with an estimated life of 730 days. When the battery is low, the device's performance may be affected. Replace the battery by following the installation steps in Section 3.1.

5.2. Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6. Troubleshooting

  • Device not pairing: Ensure the ZigBee gateway is online and the switch is in pairing mode (long press reset button for 10s). Check the Smart Life App for discovery.
  • Scenes not activating: Verify that the scenes are correctly configured in the Smart Life App. Ensure the ZigBee gateway and all linked smart devices are online and functioning correctly.
  • Intermittent connectivity: Ensure the scene switch is within range of the ZigBee gateway. Obstructions or interference can affect signal strength.
  • Switch unresponsive: Check the battery level. Replace the CR2430 3V battery if necessary.

7. Specifications

Specification diagram showing dimensions (86mm x 86mm x 13mm), input (CR2430 3V), battery life (730 days), communication (ZigBee), working temperature (-10~50°C), working humidity (0~90%RH), standby power (<1.5W), and switch lifecycle (>500K).
Figure 12: Product Specifications
AttributeValue
Product NameScene Switch
Model NumberEU Smart Switch
Brand NameMOES
InputCR2430 3V (battery not included)
Dimension86*86*13mm (3.38in)
Battery Life730 days
Communication MethodZigbee
State of AssemblyReady-to-Go
CompatibilityAll Compatible
CertificationCE
Working Temperature-10~50°C
Working Humidity0~90%RH
Standby Power< 1.5W
Switch Lifecycle> 500K

8. User Tips

  • Versatile Compatibility: This switch supports all compatible devices within the Tuya ecosystem, offering broad integration possibilities.
  • Flexible Scene Creation: Utilize the single click, double click, and long press options for each button to create a wide array of scenarios tailored to your needs.
  • Easy Setup: The device comes in a ready-to-go state of assembly and is CE certified, ensuring ease of use and compliance.
  • Long Battery Life: Benefit from an extended battery life of up to 730 days, reducing the frequency of battery changes.
  • Enhanced Convenience: Use the switch to quickly activate complex scenes, eliminating the need for voice commands or opening the app for routine tasks.

9. Warranty and Support

For detailed warranty information and technical support, please refer to the official user manual PDF available at: User Manual (PDF). You may also contact MOES Official Store for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.