Introduction
Thank you for purchasing the Ipega PG-XBS011 Multi-functional Vertical Stand for Xbox Series S. This 4-in-1 charging station is designed to enhance your gaming experience by providing efficient cooling, convenient controller charging, and organized storage for your console and accessories. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

Figure 1: Ipega PG-XBS011 Multi-functional Vertical Stand
Package Contents
- Charging Base (Vertical Stand) x1
- Headphone Hook x1
- Instructions Manual x1
- Product Package x1

Figure 2: Package Contents
Setup Instructions
Positioning the Stand: Place the vertical stand on a stable, flat surface with adequate ventilation.
Installing the Console: Carefully align your Xbox Series S console with the vertical stand. Ensure the 4 plastic bumps on the stand perfectly match the holes on the console for a secure fit. The 4 foam pads on the side of the stand will help hold the console firmly in place.
Video 1: Product assembly and feature demonstration.
Connecting Power: Connect the provided USB cable from the stand to a 5V/1.5-2A power supply (not included). This ensures sufficient current for all functions.
Attaching Headphone Stand: If desired, align the headphone hook with the designated slot on top of the console and press down firmly to install it.

Figure 3: Headphone Stand Installation
Placing Controllers: Place your Xbox Series S/X controllers into the dual charging docks. Ensure they are properly seated for charging.
Operating Instructions
Cooling System
The stand features two integrated cooling fans to help dissipate heat from your Xbox Series S console. The fans have a 3-gear adjustable speed setting.
Power On/Off: Locate the On/Off button on the stand. Press it once to turn the fans on.
Adjusting Fan Speed: Press the On/Off button repeatedly to cycle through the three fan speeds: Slow, Middle, and Fast. The LED indicators on the stand will show the current fan speed setting.

Figure 4: Adjustable Cooling Fan Speeds

Figure 5: Fan Speed Indicators
Controller Charging
The stand includes dual charging docks for your Xbox Series S/X controllers.
Charging: Place controllers equipped with original rechargeable batteries into the charging docks. The LED indicator for each controller will glow red, indicating that charging is in progress.
Full Charge/Standby: Once a controller is fully charged, or if it is placed in the dock while already charged, its corresponding LED indicator will turn green. A full charge typically takes about 2-3 hours.

Figure 6: Fast Charging Speed and LED Indicators

Figure 7: LED Charging Indicator Details
USB Expansion Ports
The stand provides two extra USB expansion ports for additional connectivity.
Connecting Peripherals: Use these ports to connect accessories such as a mouse, keyboard, or other low-power USB devices.
Note: These ports are not recommended for charging other devices like mobile phones, as they may not provide sufficient power.

Figure 8: USB Expansion Ports
Headphone Storage
The detachable headphone hook provides a convenient place to store your gaming headset.

Figure 9: Headset Hanging Hook
Maintenance
- Cleaning: Regularly wipe the stand with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
- Ventilation: Ensure that the cooling fan vents are not obstructed by dust or other objects to maintain optimal airflow and cooling performance.
- Storage: When not in use for extended periods, disconnect the power supply and store the stand in a cool, dry place.
Troubleshooting
- Problem: Controllers are not charging.
- Solution:
- Ensure the controllers are equipped with original rechargeable batteries for Xbox Series S/X. This stand is not designed for other battery types.
- Verify that the stand is properly connected to a 5V/1.5-2A power supply.
- Check that the controllers are correctly seated in the charging docks. The LED indicator should turn red when charging.
- Problem: Cooling fans are not working.
- Solution:
- Confirm that the stand is powered on and connected to a power source.
- Press the fan speed button to cycle through the different speed settings (Slow, Middle, Fast).
- Check for any obstructions in the fan vents.
- Problem: Console feels unstable on the stand.
- Solution:
- Ensure the Xbox Series S console is correctly aligned with the 4 plastic bumps on the stand's surface.
- Verify that the 4 foam pads on the side of the stand are making proper contact with the console, providing stability.
Specifications
| Feature | Specification |
|---|---|
| Model Number | PG-XBS011 |
| Compatible Console | Xbox Series S |
| Product Dimensions | 196mm x 154mm x 39mm |
| Product Weight | Approx. 390g |
| Input Voltage/Current | DC 5V/2A |
| Output Voltage/Current | DC 5V/2A |
| Controller Charging Current | ≤ 750mA X2 |
| Controller Charging Time | Approx. 3 hours |
| Cooling Fan RPM | Up to 2800 |
| Cooling Fan Noise Level | As low as 25dB |
| USB Expansion Ports | 2 (Data/Charging) |

Figure 10: Product Parameters
User Tips
- The headphone holder is included in the package and can be easily attached to the console.
- For optimal controller charging, ensure you use original rechargeable batteries for Xbox Series S/X controllers.
- A 5V/1.5-2A power supply is recommended to ensure all functions of the stand operate effectively.
- This stand is specifically designed for the Xbox Series S console and is not compatible with the Xbox Series X.
Warranty and Support
For any product support, technical assistance, or warranty inquiries, please contact the retailer or manufacturer directly. Please retain your purchase receipt as proof of purchase for warranty claims.