1. Introduction
This manual provides comprehensive instructions for the TELESIN 60M Waterproof Case, designed to protect your GoPro Hero 9, 10, 11, 12, and 13 Black cameras during underwater activities. It ensures your camera remains safe and functional in challenging environments, allowing you to capture high-quality footage.

Image: TELESIN 60M Waterproof Case shown with optional filters and a floating grip.
2. Package Contents
Depending on your selected package, the following items may be included:
- TELESIN Waterproof Case for GoPro Hero 9/10/11/12/13
- Waterproof shell packaging
- Movable base
- Long screw
- Optional: Magenta Lens Filter
- Optional: Pure Red Lens Filter
- Optional: Violet Lens Filter

Image: Components of the waterproof case package, including the case, movable base, and long screw.
3. Key Features
- Compatibility: Designed for GoPro Hero 9 Black, Hero 10 Black, Hero 11 Black, Hero 12 Black, and Hero 13 Black cameras.
- Waterproof Depth: Rated for depths up to 60 meters (196 feet).
- High Light Transmission: Features 95% light transmittance for clear underwater visuals, perfectly restoring the beauty of the deep sea.
- Multi-Protection Design:
- 100% water pressure tested.
- Anti-scratch tempered glass lens.
- Sealing rubber ring for secure closure.
- Sponge pad for camera stability.
- Sealing rubber ring backpack cover.
- Durable Construction: Made from high-strength polycarbonate (PC) material, offering anti-fall and shock-proof protection.
- Enhanced Button Protection: Upgraded wide rubber and 316 stainless steel button heads protect camera buttons from damage and ensure reliable operation.
- Clear Visibility: Clear front and back design ensures unobstructed views from inside to outside.
- Optional Dive Filters: Magenta, Pure Red, and Violet lens filters are available for color correction in deep sea areas (5-25 meters), addressing color deviation and greenish/bluish hues.

Image: Detailed view of the multi-protection features, highlighting the sealing components and durable button.

Image: Close-up of the case buttons, emphasizing the upgraded design for protection and ease of use.
4. Setup and Installation
Follow these steps to properly install your GoPro camera into the waterproof case:
- Open the Waterproof Case: Locate the lock button on the case and open it to release the back cover.
- Insert the Action Camera: Carefully place your GoPro Hero 9/10/11/12/13 Black camera into the open case. Ensure it is seated correctly.
- Secure the Case: Close the back cover and fasten the lock button to securely seal the waterproof case.

Image: Visual guide for opening the case, inserting the camera, and locking the cover.
4.1. Pre-Use Waterproof Test
Before using the case with your camera, it is highly recommended to perform a waterproof test:
- Ensure the case is empty and securely closed.
- Submerge the case in water for at least 15-30 minutes.
- Remove the case and dry its exterior thoroughly.
- Open the case and inspect the interior for any signs of water leakage. If water is present, do not use the case with your camera and contact support.
Video: Installation tutorial and waterproof test for the GoPro waterproof case.
5. Operating Instructions
5.1. Camera Operation within the Case
The waterproof case allows full access to your GoPro's physical buttons. Press the corresponding buttons on the case to control your camera's power, mode, and record functions. Note that the touch screen functionality of the GoPro is not accessible when enclosed in the waterproof case.
5.2. Using Dive Filters
Dive filters are essential for correcting color distortion underwater. They are designed to be placed directly onto the lens port of the TELESIN waterproof case. Please note that these filters are specifically designed for TELESIN waterproof cases and may not fit original GoPro cases.
- Magenta Lens Filter: Suitable for 5-25 meters deep sea areas to correct color deviation and solve problems with greenish color.
- Pure Red Lens Filter: Suitable for 5-25 meters deep sea areas to correct color deviation and solve problems with bluish color.
- Violet Lens Filter: Suitable for 5-25 meters deep sea areas to correct color deviation and solve problems with greenish color.

Image: Visual demonstration of how different dive filters correct color underwater.

Image: The three color cast filters, emphasizing their use with the TELESIN waterproof case.
6. Maintenance
- Cleaning: After each use, especially in saltwater, rinse the waterproof case thoroughly with fresh water.
- Drying: Dry the case completely with a soft, lint-free cloth. Ensure no water droplets remain on the seals or lens.
- Seal Inspection: Regularly inspect the rubber sealing ring for any signs of damage, cracks, or debris. A damaged seal can compromise waterproofing.
- Storage: Store the case in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the case.
- Lens Care: Clean the tempered glass lens with a soft lens cloth to avoid scratches and maintain optical clarity.
7. Troubleshooting
- Q: Water is leaking into the case.
- A: Ensure the back cover is securely closed and the lock button is fully engaged. Check the rubber sealing ring for any debris, damage, or improper seating. Clean the seal if necessary.
- Q: Camera buttons are not responding through the case.
- A: Verify that the camera is correctly positioned inside the case and that the case's buttons align properly with the camera's buttons. Ensure the case is not overtightened, which could impede button movement.
- Q: Underwater footage has poor color or is too green/blue.
- A: This is normal color cast underwater. Use the appropriate dive filter (Magenta for green water, Pure Red for blue water) for depths between 5-25 meters to correct the color. Ensure the filter is clean and properly attached.
- Q: Image quality is blurry or hazy.
- A: Check the tempered glass lens of the case for smudges, fingerprints, or scratches. Clean it gently with a microfiber cloth. Also, ensure the GoPro camera lens itself is clean before placing it in the case.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | TELESIN |
| Model Number | GP-WTP-901 |
| Type | Waterproof Housings |
| Compatible Action Camera Brand | GoPro (Hero 13, 12, 11, 10, 9) |
| Water Resistance Level | Waterproof (up to 60 meters / 196 feet) |
| Material | PC (Case), Tempered Glass (Lens) |
| Item Weight | 135g |
| Dimensions (L x W x H) | 8.5cm x 4.6cm x 9.4cm |
| Audio recording | No (through case) |
| Video Capture Resolution | N/A (case does not affect resolution) |
9. User Tips
- Always perform a waterproof test without your camera before first use and after any significant impact or maintenance.
- Ensure the case is completely dry before opening it to prevent water from entering and damaging your camera.
- The filters are designed specifically for the TELESIN waterproof case; they are not compatible with original GoPro waterproof cases.
- The case provides full button operation, but the GoPro's touch screen is not accessible when enclosed.
- The high-quality construction of the case provides excellent protection, making it a reliable choice for various action activities.
10. Frequently Asked Questions (FAQ)
- Q: What are the main benefits of using this waterproof case?
- A: The primary benefit is protecting your GoPro camera from water damage, allowing you to use it for underwater photography and videography up to 60 meters deep.
- Q: Are the included filters compatible with the original GoPro waterproof case?
- A: No, the filters are designed exclusively for the TELESIN waterproof housing.
- Q: Do I need to remove the GoPro's lens before placing it in the TELESIN waterproof case?
- A: No, there is no need to remove the GoPro's lens. The case is designed for direct insertion of the camera.
- Q: How durable is the plastic of the case?
- A: The case is made from high-strength polycarbonate material, providing anti-fall and shock-proof protection. While robust, its suitability for extreme impact sports like paintball or airsoft for camera protection is not explicitly guaranteed.
- Q: How do I control the GoPro's touch screen while it's in the case?
- A: The waterproof case is designed for operation using the physical buttons on the case, which correspond to the camera's buttons. The touch screen is not accessible when the camera is enclosed.
- Q: Is the lens of the waterproof case made of glass or acrylic?
- A: The lens of the waterproof case is made from high organic tempered glass.
11. Warranty and Support
TELESIN products come with a 1-year warranty. For any issues or support inquiries, please contact TELESIN customer service through their official channels. Ensure you retain your proof of purchase for warranty claims.