Foval 2000W Pure Sine Wave Inverter

Contents

Foval 2000W Pure Sine Wave Inverter Instruction Manual

DC 12V/24V to AC 220V/230V 50Hz/60Hz Voltage Transfer Solar Power Converter Universal Socket

1. Introduction

Thank you for choosing the Foval Pure Sine Wave Inverter. This device is designed to convert DC power from your vehicle battery or solar system into stable AC power, suitable for a wide range of household appliances and electronic devices. This manual provides essential information for safe operation, installation, and maintenance of your inverter.

2. Safety Information

  • Read all instructions before operating the inverter.
  • Keep the inverter away from water, moisture, and flammable materials.
  • Ensure proper ventilation around the inverter to prevent overheating.
  • Do not open the inverter casing; there are no user-serviceable parts inside.
  • Always connect the inverter to a DC power source with the correct voltage (12V or 24V) and ensure correct polarity.
  • Do not connect the inverter to grid power.
  • Avoid overloading the inverter beyond its continuous output power rating.

3. Product Overview

The Foval Pure Sine Wave Inverter features a robust design for reliable power conversion. Key components include:

Front view of the Foval Pure Sine Wave Inverter showing the universal AC output socket, ON/OFF switch, dual USB 5V output ports, and a USB fault power LED indicator.
Front Panel: Universal AC Output Socket, ON/OFF Switch, Dual USB 5V Output, USB Fault Power LED Indicator.
Rear view of the Foval Pure Sine Wave Inverter showing the positive and negative DC input terminals and the cooling fan.
Rear Panel: Positive DC Input Terminal (Red), Negative DC Input Terminal (Black), Cooling Fan.

4. Specifications

FeatureSpecification
Output WaveformPure Sine Wave
Peak Output Power2000W
Continuous Output Power1000W
Frequency50Hz ± 2Hz / 60Hz ± 2Hz
No Load Current Draw<0.8 Amps
Conversion Efficiency>90%
Input DC Voltage12V (Range: 9V-15.5V) or 24V (Range: 18V-31V)
Output AC Voltage220V (Range: 210V-240V)
Low Voltage Alarm10V DC ± 0.5V
Low Voltage Shut Down9V DC ± 0.5V
Over Voltage Shut Down15.5V (for 12V input) / 31V (for 24V input)
Over ThermalShut Off Output Automatically
FusesShort Circuit Protection
StartSoft Start
Dimensions235mm * 112mm * 60mm
Weight1.2kg
USB OutputYES (5V)
MaterialAluminum Alloy
Socket StyleUniversal
CertificationsCE, RoHS
Dimensions of the Foval Pure Sine Wave Inverter: 235mm length, 112mm width, 60mm height.
Inverter Dimensions

5. Package Contents

Upon opening your package, please ensure all items are present and in good condition:

  • 1 x Foval Pure Sine Wave Inverter
  • 2 x Battery Crimper Cables (Red for Positive, Black for Negative)
  • 1 x User Manual (this document)

6. Setup Instructions

6.1 Connecting to a DC Power Source

  1. Ensure the inverter's ON/OFF switch is in the 'OFF' position.
  2. Connect the red battery crimper cable to the positive (+) terminal of your 12V or 24V DC battery and to the red positive (+) terminal on the inverter.
  3. Connect the black battery crimper cable to the negative (-) terminal of your DC battery and to the black negative (-) terminal on the inverter.
  4. Ensure all connections are tight and secure to prevent arcing or poor performance.

6.2 Connecting AC Appliances

  1. With the inverter still OFF, plug your AC appliance(s) into the universal AC output socket(s) on the inverter.
  2. For USB charging, connect your USB device to the USB 5V OUT ports.

Important Note:

  • Please ensure that the rated power of your appliance(s) is lower than the continuous output power (1000W) of the inverter.
  • If running multiple devices, refer to their total wattage.
  • For larger power appliances, it is recommended to use thicker connecting wires than those supplied to ensure full power output and safety.
  • Do not connect the inverter with grid power. Reverse connection of positive and negative terminals is strictly forbidden.

7. Operation

7.1 Powering On/Off

  1. After all connections are secure, switch the inverter's ON/OFF button to the 'ON' position.
  2. The inverter will perform a soft start. The LED indicator should light up, indicating normal operation.
  3. To turn off, switch the ON/OFF button to the 'OFF' position. Disconnect appliances before disconnecting the inverter from the battery.

7.2 Applications

This pure sine wave inverter is suitable for a wide range of applications, including:

  • Computers and laptops
  • Charging mobile phones and other USB devices
  • Small kitchen appliances like coffee makers
  • Powering various tools like drills
Illustrations of various applications for the inverter, including a computer, phone, coffee maker, and drill.
Versatile applications for your Foval Inverter.
Video demonstrating the pure sine wave output of the inverter on an oscilloscope.

8. Safety Protection Functions

Your Foval Pure Sine Wave Inverter is equipped with 8 comprehensive safety protection features:

Diagram showing six safety protection icons: Over Heat, Over Load, Reverse Polarity, Under Voltage, Over Voltage, Short Circuit.
Built-in safety protections for your inverter.
  1. Reverse polarity protection
  2. Low input voltage protection
  3. High input voltage protection
  4. Over-current protection
  5. Short circuit protection
  6. Over temperature protection
  7. Overload protection
  8. Internal fuses

9. Troubleshooting

If you encounter issues with your inverter, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Inverter does not turn on / No outputLoose battery connections, low battery voltage, incorrect polarity, blown internal fuse.Check battery cable connections. Ensure battery voltage is within range (9V-15.5V for 12V, 18V-31V for 24V). Verify correct polarity. If internal fuse is blown, replace with spare (if applicable) or contact support.
Inverter shuts down unexpectedlyOverload, overheating, low/high input voltage.Reduce connected load. Ensure adequate ventilation. Check battery voltage. Allow inverter to cool down if hot.
USB ports not chargingInverter not powered on, USB fault.Ensure inverter is ON. Check USB cable and device. If USB FAULT POWER LED is on, disconnect and reconnect.
Appliance not working correctlyAppliance power exceeds inverter capacity, inductive load issues.Verify appliance wattage is within inverter's continuous power. For inductive loads (motors, compressors), ensure inverter's continuous power is 3-7 times higher than the appliance's rated watts.

10. Maintenance

To ensure the longevity and optimal performance of your Foval Inverter, follow these maintenance guidelines:

  • Keep the inverter clean and free from dust and debris. Use a dry cloth for cleaning.
  • Regularly check all cable connections for tightness and corrosion. Clean terminals if necessary.
  • Ensure the cooling fan vents are unobstructed to allow for proper airflow.
  • Store the inverter in a cool, dry place when not in use.

11. User Tips

  • Wiring for High Power: If you plan to use the inverter with larger power appliances, consider replacing the provided connecting wires with thicker gauge cables to ensure maximum efficiency and prevent voltage drop.
  • Inductive Loads: Appliances with motors (e.g., refrigerators, drills, washing machines, water pumps, microwave ovens, vacuum cleaners, hair dryers) are considered inductive loads. These devices often have a high startup surge current. For such applications, choose an inverter whose continuous power rating is 3-7 times higher than the appliance's rated wattage to accommodate the surge.
  • Power Calculation: Always calculate the total wattage of all devices you intend to power simultaneously to avoid overloading the inverter.

12. Frequently Asked Questions (FAQ)

Q: Does the declared power correspond to the actual output?
A: The inverter has a continuous output power of 1000W and a peak output power of 2000W. Always ensure your appliance's continuous power requirement is within the inverter's continuous rating. For inductive loads, consider the surge power requirement.
Q: Can this inverter start a refrigerator?
A: Refrigerators are inductive loads and require a significant surge of power to start. While this is a pure sine wave inverter, you must ensure its continuous power rating is 3-7 times higher than your refrigerator's rated wattage to handle the startup current. Consult the refrigerator's specifications and the inverter's continuous power rating (1000W) before attempting.

13. Warranty and Support

This product comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Please have your purchase details and product model information ready when contacting support.

© 2023 Foval. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.