TECNR 2SP508

Contents

TECNR RUBBUR 2SP508 Packaging Machine Control System User Manual

Microcomputer Control Panel

1. Introduction

The TECNR RUBBUR 2SP508 is a microcomputer control panel designed for packaging machines. This system provides precise control and monitoring capabilities, enhancing the efficiency and reliability of various packaging processes. It features an intuitive LCD screen and robust error detection mechanisms to ensure smooth operation.

2. Key Features

  • 4.9-inch LCD screen for clear display of operational status and settings.
  • Automatic detection and diagnosis of heater failures.
  • Automatic detection and diagnosis of fuse tube failures.
  • Optical eye fault detection for precise material handling.
  • Proximity switch fault detection for accurate positioning.
  • Automatic shutdown function in case of film shortage.
  • Automatic shutdown function for lack of material.
  • Limited automatic shutdown function for safety and process control.
  • Supports packaging speeds lower than 200 bags/min.
  • Versatile compatibility with various bag types: triangle bag, three-side seal, back seal, jelly strip, and even bag models.
  • Utilizes software cams for synchronized vibration, inflation, slitting, film pulling, and blanking operations.
  • Dual-axis control capability, managing two stepping motors simultaneously.
  • Ensures the packaging machine stops precisely at the seal opening position.
  • Durable touch switch with an estimated lifespan of ten years.

3. Specifications

AttributeValue
Brand NameTECNR
Model2SP508
OriginMainland China
CertificationNONE
Package Length18 cm
Package Width12 cm
Package Height15 cm
Package Weight1.4 kg

4. Setup and Installation

Proper installation is crucial for the optimal performance of the RUBBUR 2SP508 control system. Refer to the wiring diagram and physical connections for accurate setup.

4.1 Physical Installation

Mount the control panel securely in an accessible location on your packaging machine, ensuring adequate ventilation and protection from environmental factors.

Rear view of the RUBBUR 2SP508 control panel with terminal blocks
Figure 4.1: Rear View of Control Panel. This image shows the rear of the RUBBUR 2SP508 control panel, displaying various terminal blocks for electrical connections. These include inputs for AC and DC power, connections for motors, and signal inputs/outputs. A label indicating "TYPE: 2SP508" is visible on the side.

4.2 Electrical Connections

Connect the control panel to the packaging machine's power supply, sensors, and actuators according to the detailed wiring diagram provided. Ensure all connections are secure and correctly polarized to prevent damage.

Wiring diagram for RUBBUR 2SP508-SAC/D/F microcomputer packaging machine controller
Figure 4.2: Wiring Diagram. This comprehensive diagram illustrates the electrical connections for the RUBBUR 2SP508-SAC/D/F microcomputer packaging machine controller. It details power supply connections (220VAC, 24VDC), sensor inputs (optical eye, proximity switches), motor connections (stepping motor, feeding motor), heater circuits, and various control signals. Key components such as transformers, fuses, and relays are clearly indicated, providing a complete guide for integrating the control panel into a packaging system.

Important Wiring Notes:

  • Verify power supply voltages (220VAC, 24VDC) match the requirements shown in the diagram.
  • Ensure correct polarity for all DC connections.
  • Connect optical eye and proximity switches to their designated inputs for accurate detection.
  • Properly connect stepping motors and feeding motors to the dual-axis control outputs.
  • Install appropriate fuses as indicated in the diagram for circuit protection.

5. Operation

The RUBBUR 2SP508 control panel is designed for user-friendly operation through its LCD screen and dedicated control buttons.

5.1 Front Panel Overview

Front view of the RUBBUR 2SP508 control panel
Figure 5.1: Front Panel. This image displays the front of the RUBBUR 2SP508 control panel, featuring a green LCD screen that shows operational status and instructions, such as "Press S to set up!". Control buttons labeled A, B, C, D, and S are located on the right side of the screen.

5.2 Basic Controls

  • LCD Screen: Displays current counts, bag length, limits, step settings, optical eye status, and switch status.
  • 'S' Button: Typically used to enter setup mode or confirm selections, as indicated by "Press S to set up!".
  • 'A', 'B', 'C', 'D' Buttons: These buttons are used for navigation, parameter adjustment, and specific function activation within the menu system. Their exact functions will vary depending on the current screen and mode.

5.3 Setting Parameters

To adjust operational parameters such as bag length, limits, or step settings:

  1. Press the 'S' button to enter the setup menu.
  2. Use buttons 'A', 'B', 'C', 'D' to navigate through the menu options and select the parameter you wish to modify.
  3. Adjust the value using the appropriate buttons (e.g., 'A' for increment, 'B' for decrement).
  4. Press 'S' again to confirm the setting and exit the setup menu.

6. Maintenance

Regular maintenance ensures the longevity and reliable performance of your RUBBUR 2SP508 control system.

  • Cleaning: Keep the control panel and LCD screen clean from dust and debris using a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Connections: Periodically check all electrical connections for tightness and signs of wear or corrosion. Re-tighten as necessary.
  • Environmental Conditions: Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage to electronic components.
  • Software Updates: If available, consult the manufacturer for any recommended software or firmware updates.

7. Troubleshooting

The RUBBUR 2SP508 system includes several automatic fault detection features. Refer to the LCD screen for error messages and follow these general troubleshooting steps:

ProblemPossible CauseSolution
System not powering onNo power supply; Blown fuseCheck power connections; Replace fuse (system automatically detects fuse failure).
Heater failure detectedFaulty heater element or connectionInspect heater connections; Replace faulty heater (system automatically detects heater failure).
Optical eye fault detectedBlocked optical eye; Malfunctioning sensorClean optical eye; Check sensor wiring; Replace sensor if necessary.
Proximity switch fault detectedMisaligned or faulty proximity switchAdjust switch position; Check wiring; Replace switch if necessary.
Machine stops due to film shortageFilm roll depleted or improperly loadedReplace film roll; Ensure correct film loading and tension.
Machine stops due to lack of materialProduct hopper empty or material feed issueRefill product hopper; Clear any material blockages.
Machine stops at incorrect seal positionCalibration issue; Sensor misalignmentRecalibrate seal position; Check optical eye or encoder for proper function.

8. User Tips

  • Always power off the machine before performing any maintenance or wiring adjustments.
  • Familiarize yourself with the 'S' button and the A, B, C, D buttons for efficient navigation and parameter setting.
  • Regularly check the LCD screen for any diagnostic messages to proactively address potential issues.
  • Keep a spare set of fuses and common sensors (optical eye, proximity switch) on hand to minimize downtime.

9. Frequently Asked Questions (FAQ)

Q: What types of packaging machines is this control system compatible with?
A: The RUBBUR 2SP508 is suitable for machines producing triangle bags, three-side seals, back seals, jelly strips, and even bag models.
Q: How do I know if a heater or fuse has failed?
A: The system features automatic detection and will display a fault message on the 4.9-inch LCD screen if a heater or fuse tube failure occurs.
Q: Can I control two motors independently?
A: Yes, the system has dual-axis control, allowing it to manage two stepping motors simultaneously.

10. Warranty and Support

For warranty information and technical support, please contact your vendor or the manufacturer directly. Ensure you have your product model (2SP508) and any relevant purchase details available when seeking assistance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.