ICANING G10/G10S Pro Voice Remote Control User Manual

1. Introduction

The ICANING G10/G10S Pro is a versatile 2.4G wireless air mouse remote control designed to enhance your smart entertainment experience. It features a built-in 6-axis gyroscope and gravity acceleration sensor for precise motion sensing, a high-fidelity voice microphone for voice search, and infrared (IR) learning capabilities. This device combines the functions of a traditional remote control, a computer mouse, and a gaming motion controller, offering convenient control over various Android platforms and other compatible devices.

2. Key Features

• Voice Search Function: Easily search for content by speaking into the remote.
• Air Mouse & Gyroscope Function: Equipped with 3-Gyro + 3-Gsensor for intuitive motion control in both horizontal and vertical modes.
• IR Learning Function: The 'Power' button can be programmed to learn infrared signals from other remote controls.
• 2.4G Wireless Connection: Provides a stable and responsive connection with a micro USB receiver.
• LED White Backlight: (G10S Pro only) For improved visibility in low-light conditions.
• Built-in Fidelity Microphone: Ensures clear voice input for commands.

3. Package Contents

• 1 x ICANING G10/G10S Pro Air Mouse (batteries not included)
• 1 x USB Receiver (located in the battery compartment)
• 1 x User Manual

4. Setup Guide

4.1. Battery Installation

1. Open the battery compartment cover on the back of the remote control.
2. Insert two AAA batteries (not included), ensuring correct polarity (+/-).
3. Close the battery compartment cover.

4.2. Connecting the USB Receiver

1. Locate the USB receiver inside the remote's battery compartment.
2. Plug the USB receiver into an available USB port on your device (e.g., Smart TV, PC, Android TV Box).
3. Wait for 20-60 seconds for the device to automatically install the necessary drivers.
4. Move the air mouse; if the cursor appears and moves on the screen, pairing is successful.

4.3. Manual Pairing (If Automatic Fails)

If the remote does not pair automatically:

1. Press and hold the "OK" and "Home" buttons simultaneously.
2. The LED indicator light on the remote will begin to flash.
3. Release the buttons once the LED light stops flashing, indicating successful pairing.

5. Operating Instructions

5.1. Button Layout and Functions

5.2. Air Mouse Function

Hold the air mouse and rotate your wrist to move the cursor across the screen. This allows for intuitive control of your device from a distance.

5.3. Voice Search Function

To use voice search, simply speak into the built-in microphone on the remote. For Android TV Boxes, you may need to click the microphone button on the screen to activate the voice function. Ask for movies, weather, news, or other commands.

5.4. IR Learning Function (for 'Power' button only)

The 'Power' button on the G10/G10S Pro can learn infrared signals from your existing TV remote's power button.

1. Press and hold the [Power] button on the G10/G10S Pro for 3 seconds. The red indicator light will start to flash slowly, indicating it has entered IR learning mode.
2. Point your original infrared remote control directly at the G10/G10S Pro remote (head-to-head) and press the 'Power' button on your original remote.
3. The G10/G10S Pro's red indicator light will flash rapidly and then go out, signifying successful IR learning. The learned code will automatically overwrite any previous function of the 'Power' button.

5.5. Cursor Speed Adjustment

The air mouse has 3 levels of cursor speed:

• From slow to fast: Press and hold the "OK" and "Volume+" buttons. The speed adjusts one level when the LED light turns on.
• From fast to slow: Press and hold the "OK" and "Volume-" buttons. The speed adjusts one level when the LED light turns on.

5.6. Special Function Keys

• Home: Press and hold for 3 seconds to go back to the home screen.
• Return: Go back to the previous screen.
• OK: Confirm action or insert cursor.
• Cursor Locking: Press to lock the air mouse cursor; press again to unlock.
• Play/Pause: Multimedia play/pause.
• Backlit Function: (G10S Pro only) Turn backlight on/off.
• Voice Switch: Press and hold to turn on the voice channel; release to turn off.

6. Maintenance

6.1. Low Battery Indicator

The red indicator light will flash slowly when the AAA battery power drops below 2V, signaling that the batteries need to be replaced.

6.2. Sensor Calibration

If the cursor drifts due to changes in voltage or temperature, place the air mouse flat on a stable surface and keep it still. You can complete the calibration by pressing any key to wake it up from hibernation mode.

7. Troubleshooting

• Remote Not Responding: Ensure batteries are correctly installed and charged. Re-insert the USB receiver into the device. Try manual pairing (Section 4.3).
• Voice Function Not Working: The voice function may not be compatible with certain devices (e.g., TX3 mini, X96W (S905W), X92, X98 PRO, Magicsee N5 TV boxes, Fire TV/Stick, Xiaomi TV, and some Smart TVs). It is known to work with H96 MAX+, T9, V1, X96MAX TV boxes. For Android TV boxes, ensure "Google Assistant" or a similar voice assistant app is installed.
• Air Mouse Cursor Drifting: Perform sensor calibration as described in Section 6.2.
• IR Learning Issues: Remember that only the 'Power' button supports IR learning. Ensure the original remote is pointed directly at the G10/G10S Pro during the learning process. If the red light remains on after IR learning, try re-installing the batteries.
• Smart TV Compatibility: Some Smart TVs may block third-party USB dongles. Verify that your Smart TV supports external USB dongles and other remote controls besides its original one.

8. Specifications

8.1. Device Compatibility

The G10/G10S Pro is compatible with a wide range of devices:

• Smart TV
• PC (Personal Computer)
• Android TV Box
• HTPC (Home Theater Personal Computer)
• Raspberry Pi
• Android Projector
• Mouse (as a replacement)
• Tablet (with OTG support)
• Phone (with OTG support)

9. User Tips

• For optimal voice command recognition, speak clearly and hold the remote close to your mouth.
• When performing IR learning, ensure there are no obstructions between the two remotes.
• If the air mouse cursor becomes erratic, a quick sensor calibration (Section 6.2) can often resolve the issue.
• Consider using rechargeable AAA batteries for convenience and environmental benefits.

10. Warranty and Support

For any issues or questions regarding your ICANING G10/G10S Pro remote control, please contact the seller or refer to the product listing for support information. Keep your purchase receipt for warranty purposes.