1. Introduction
Thank you for choosing the Blauberg Cabrio 100 Base exhaust fan. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ventilation unit. Please read these instructions carefully before use and retain them for future reference.
Figure 1: Blauberg Cabrio 100 Base Exhaust Fan (Front View)
2. Safety Information
- Always disconnect the power supply before installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Ensure the fan is installed in a location where it is not exposed to direct water spray, unless specifically designed for such conditions (IP44 rating provides protection against splashing water).
- Do not operate the fan with a damaged power cord or plug.
- Keep children and unauthorized persons away from the fan during operation.
- Ensure proper ventilation in the room to prevent backflow of gases from open-flued appliances.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Product Features and Highlights
The Blauberg Cabrio 100 Base is a silent and energy-efficient exhaust fan designed for bathrooms, kitchens, and toilets. Key features include:
- Energy Efficiency: Low power consumption (max 9W) due to a new energy-efficient motor.
- Durable Construction: Casing and impeller made of high-quality, UV-resistant ABS plastic.
- Optimized Airflow: Special mixed-type impeller aerodynamic shape ensures high air flow (97 m³/h) and low noise levels.
- Silent Operation: Motor mounted on rubber vibration isolators for quiet performance.
- Overheat Protection: Motor is equipped with built-in overheat protection for safety.
- Long-Life Bearings: Maintenance-free ball bearings contain sufficient lubricant for over 40,000 continuous operation hours.
- Smooth Panel Operation: Equipped with a special mechanism for smooth opening and closing of the front panel.
- Reduced Turbulence: Special air flow straighteners in the fan outlet reduce turbulence and noise.
- Water Protection: High water protection level (IP44) makes it ideal for humid environments.
- Compact Installation: Shortened spigot allows installation into a ventilation shaft or connection to a Ø 100 mm air duct.
- Easy Maintenance: Fan unit is easily removable from the casing for cleaning.
- Modern Design: Contemporary aesthetic blends harmoniously with various interior styles.
4. Specifications
| Parameter | Value |
|---|---|
| Model Number | Cabrio 100 Base |
| Brand Name | Blauberg Ventilatoren |
| Type | Ventilation (Exhaust) |
| Certification | CE |
| Fan Construction | Axial, Wall-mounted |
| Duct Diameter | 100 mm |
| Productivity | 97 m³/h (27 l/s) |
| Noise Level (at 3m) | 25 dB(A) |
| Power Supply | 220-240 V |
| Frequency | 50 Hz |
| Nominal Power | 9 W |
| Current | 0.05 A |
| Rotation Frequency | 2180 min⁻¹ |
| Mass | 0.55 kg |
| IP Rating | IP44 |
Dimensions (mm)
| Dimension | Value (mm) |
|---|---|
| a (Overall Width) | 175 |
| b (Overall Height) | 221 |
| c (Depth from Wall) | 77 |
| Ød (Duct Diameter) | 99 |
| e (Duct Length) | 39 |
Note: The fan performance curve shows the relationship between air flow (l/s and m³/h) and static pressure. This fan is designed for optimal performance in typical residential ventilation systems.
5. Package Contents
Upon unpacking, please ensure all components are present and undamaged:
- Blauberg Cabrio 100 Base Exhaust Fan Unit
- Mounting Screws and Wall Plugs
- Instruction Manual (this document)
If any parts are missing or damaged, please contact your supplier immediately.
6. Installation and Setup
The Blauberg Cabrio 100 Base fan is designed for wall or ceiling mounting and connection to a 100 mm diameter air duct or ventilation shaft. Installation should be carried out by a qualified professional.
6.1 Pre-Installation Checks
- Verify that the power supply matches the fan's specifications (220-240V, 50Hz).
- Ensure the mounting surface is flat, stable, and capable of supporting the fan's weight.
- Confirm that the ventilation duct or shaft has a diameter of 100 mm.
- Disconnect power at the main circuit breaker before starting any electrical work.
6.2 Mounting the Fan
- Carefully remove the front panel of the fan to access the mounting holes and terminal block.
- Position the fan unit against the wall or ceiling at the desired location, ensuring the spigot aligns with the duct opening.
- Mark the positions for the mounting screws.
- Drill holes at the marked positions and insert the wall plugs.
- Secure the fan casing to the wall/ceiling using the provided screws.
6.3 Electrical Connection
The Cabrio 100 Base model is controlled by an external room light switch (not included). Connect the fan to the electrical supply as follows:
- Route the electrical cable to the fan's terminal block.
- Connect the Live (L) wire from the switch to the Live terminal on the fan.
- Connect the Neutral (N) wire to the Neutral terminal on the fan.
- Ensure all connections are secure and properly insulated.
- Replace the front panel of the fan.
Figure 2: Side view of the fan, showing depth and duct connection
Figure 3: Fan installed in a duct
7. Operation
The Blauberg Cabrio 100 Base fan operates simply:
- Once correctly installed and wired, the fan will activate when the connected room light switch is turned ON.
- The fan will stop operating when the room light switch is turned OFF.
- Ensure the fan is not obstructed during operation to maintain optimal airflow and prevent overheating.
8. Maintenance
Regular cleaning ensures optimal performance and longevity of your fan. Always disconnect power before performing any maintenance.
8.1 Cleaning the Fan Unit
- Disconnect the fan from the main power supply.
- Carefully remove the front panel.
- Gently pull out the fan unit from the casing.
- Clean the impeller blades and the interior of the casing with a soft cloth dampened with mild detergent. Do not use abrasive cleaners or solvents.
- Ensure all parts are completely dry before reassembling.
- Reinsert the fan unit into the casing and reattach the front panel.
- Reconnect the power supply.
The ball bearings are maintenance-free and do not require lubrication.
9. Troubleshooting
If you encounter issues with your fan, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Loose wiring; Faulty switch | Check circuit breaker; Verify electrical connections; Test or replace switch. |
| Reduced airflow | Dirty impeller/grille; Obstructed ducting | Clean fan components; Check ducting for blockages. |
| Excessive noise/vibration | Loose mounting; Impeller imbalance (due to dirt); Foreign object in fan | Tighten mounting screws; Clean impeller thoroughly; Inspect for and remove foreign objects. |
| Fan stops unexpectedly | Overheat protection activated; Intermittent power supply | Allow fan to cool; Check power supply stability. If problem persists, contact service. |
If the problem persists after attempting these solutions, please contact customer support.
10. User Tips
- Regular Cleaning: To maintain optimal performance and prevent dust buildup, clean the fan unit every 3-6 months, especially in high-humidity or dusty environments.
- Proper Sealing: Ensure the fan is properly sealed to the wall/ceiling and ducting during installation to prevent air leakage and maximize efficiency.
- Consider a Timer Switch: While the Base model is controlled by a standard switch, consider upgrading to a timer switch (e.g., Blauberg Cabrio 100 T variant) for automatic operation after the light is turned off, which can be beneficial for bathroom ventilation.
11. Warranty and Support
Blauberg Ventilatoren products are manufactured to high-quality standards. For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Blauberg Ventilatoren website.
Please retain your proof of purchase for any warranty claims.
