Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your evernice Foot Control Pedal. This high-quality foot control and cord set is designed for use with various sewing machine models, offering precise speed control for your sewing and embroidery projects.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | evernice |
| Type | Sewing Machine Parts |
| Use | Embroidery |
| Material | Plastic |
| Set Type | Yes |
| High-concerned chemical | None |
| Origin | Mainland China |
| Electrical Rating | DC35V Max 3mA |
Plug Dimensions:
- Pin spacing (approx.): 7.91 mm
- Pin diameter (approx.): 2.284 mm
- Plug width (approx.): 9.89 mm
- Plug height (approx.): 9.84 mm
- Overall plug length (approx.): 17.46 mm
Compatible Sewing Machine Models
This foot control pedal is compatible with the following sewing machine models. Please ensure to compare the plug configuration with your machine's receptacle before connecting.
- Elna: 3230, 7100
- Husqvarna Viking: Eden Rose 250M, 118 Emerald, 122 Emerald, 224 HuskyStar, Mega Quilter 1200, Tribute 140M, Tribute 145M
- Janome (Newhome): 1600P, 1600P-DB, 1600P-DBX, 1600P-QC, 2200, 4123, 6125QC, 625E Sewist, 7325 Magnolia, CE2200, CM2200, L392, Sew Precise
- Kenmore: 385.16231300, 385.16231301
- Pfaff: 1200 Hobby Grand Quilter
- Singer: 7100
Important: Some machine models may have changed foot control styles over their production years. Always compare the image of the 3-prong plug with your machine's input port to ensure compatibility.
Setup Instructions
- Verify Compatibility: Before connecting, carefully examine the 3-prong plug on the foot control cord and compare it to the receptacle on your sewing machine. Ensure they match perfectly to avoid damage. Refer to the compatibility section and images provided.
- Power Off: Ensure your sewing machine is turned off and unplugged from the wall outlet before connecting the foot control.
- Connect the Cord: Insert the 3-prong plug of the foot control cord firmly into the corresponding receptacle on your sewing machine.
- Position the Pedal: Place the foot control pedal on the floor in a comfortable position where you can easily operate it with your foot.
- Power On: Once the foot control is securely connected, plug your sewing machine back into the wall outlet and turn on the machine's power switch.
Operating Instructions
The foot control pedal allows you to regulate the speed of your sewing machine. Pressing down on the pedal increases the sewing speed, while releasing it decreases the speed or stops the machine.
- Start Sewing: Gently press down on the foot control pedal to begin sewing. The harder you press, the faster the machine will sew.
- Control Speed: Vary the pressure on the pedal to achieve your desired sewing speed. Light pressure for slow, precise stitching; heavier pressure for faster sewing.
- Stop Sewing: Release pressure from the pedal to stop the machine.
Maintenance
- Cleaning: Wipe the foot control pedal with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or immerse the pedal in water.
- Cord Care: Avoid kinking, twisting, or placing heavy objects on the cord. Store the cord neatly when not in use to prevent damage.
- Storage: Store the foot control in a dry, clean place away from extreme temperatures and direct sunlight.
- Inspection: Periodically inspect the cord and plug for any signs of wear, fraying, or damage. If any damage is observed, discontinue use and seek a replacement.
Troubleshooting
Pedal Not Responding:
- Check Connections: Ensure the foot control cord is securely plugged into both the pedal and the sewing machine.
- Power Supply: Verify that the sewing machine is plugged into a working electrical outlet and the machine's power switch is on.
- Compatibility: Double-check that the foot control is compatible with your specific sewing machine model and that the plug configuration matches.
Inconsistent Speed Control:
- Clean Pedal: Ensure no debris is lodged in the pedal mechanism that might hinder smooth operation.
- Internal Wear: If the pedal is old or heavily used, internal components may be worn. Consider replacing the pedal if cleaning does not resolve the issue.
If troubleshooting steps do not resolve the issue, please contact the seller or a qualified sewing machine technician for assistance.
User Tips
- Always ensure the foot control is placed on a stable, non-slip surface to prevent accidental movement during operation.
- Practice varying pressure on the pedal to gain fine control over your sewing speed, especially for intricate tasks.
- When not in use, unplug the foot control from the sewing machine and store it safely to prevent accidental activation or damage.
Warranty and Support
For any questions regarding the product, technical support, or warranty information, please contact the seller directly through the platform where the purchase was made. Provide your order details and a clear description of the issue for prompt assistance.
