LILYTECH ZL-7901A

Contents

LILYTECH ZL-7901A Intelligent Temperature and Humidity Controller

Model: ZL-7901A

1. Introduction

The LILYTECH ZL-7901A is an advanced intelligent temperature and humidity controller designed for precise environmental management. It integrates temperature and humidity control with three programmable timers, making it suitable for a wide range of applications requiring stable climate conditions. This device allows for the connection of two heating circuits (main and auxiliary) or an output for SSR control, utilizing a PID algorithm for high-precision temperature regulation.

LILYTECH ZL-7901A controller, angled front view
Figure 1: Angled front view of the LILYTECH ZL-7901A controller.
LILYTECH ZL-7901A display showing 28.0 degrees Celsius and 44.4 percent humidity
Figure 2: The ZL-7901A display showing current temperature and humidity readings.

2. Key Features

The ZL-7901A controller offers a comprehensive set of features for precise environmental control:

  • Temperature Control: Three combined outputs with high-accuracy PID regulation.
  • Humidity Control: Manages both humidification and dehumidification processes.
  • Air Exchange Management: Controls ventilation systems.
  • Egg Turning Control: Specifically designed for incubator applications.
  • Lighting Control: Manages illumination schedules.
  • Alarm System: Provides sound notifications for temperature or humidity deviations from set norms.
  • Automatic Restart: Ensures continuous operation after power interruptions.
  • Protection Functions: Includes safeguards against extreme temperature/humidity conditions.
  • Sensor Warning: Alerts for issues with temperature and humidity sensors.
  • User Interface: Equipped with responsive touch buttons and a large, clear liquid crystal display for easy interaction.

3. Applications

The LILYTECH ZL-7901A thermoregulator is versatile and ideal for use in various environments where precise temperature and humidity control are critical:

  • Incubators
  • Brooders
  • Climate Chambers
  • Greenhouses and Vegetable Storage
  • Various Warehouses
  • Terrariums
  • Other applications requiring controlled temperature and humidity.

4. Specifications

Parameter Value
Power Supply 100 ~ 240 VAC, 50 - 60Hz
Humidity Setting Range 0 - 100% RH
Temperature Setting Range 0 - 100 °C
Humidity Measurement Accuracy ±5% RH
Temperature Measurement Accuracy ±1% °C
Operating Humidity 10 - 90% RH (non-condensing)
Operating Temperature -20 °C ~ +45 °C
Dimensions (L x W x H) 13.7 cm x 8.9 cm x 5.6 cm
Installation Hole Size 12.2 cm x 7.5 cm

Relay Outputs (8 Channels):

  • Main Heating Element Control: 7.5 A / 250 V (resistive load)
  • Auxiliary Heating Element Control: 7.5 A / 250 V (resistive load)
  • Humidity Control: 7.5 A / 250 V (resistive load)
  • Lighting Control: 7.5 A / 250 V (resistive load)
  • Air Exchange: 7.5 A / 250 V (resistive load)
  • Egg Turning: 7.5 A / 250 V (resistive load)
  • Emergency Output: 7.5 A / 250 V (resistive load)
  • SSR Output: 20 mA / 10 V DC Max

Analog Inputs (2 Channels):

  • NTC Temperature Sensor (5K/3470)
  • Humidity Sensor (SHR04)

5. Setup and Installation

Proper installation is crucial for the safe and effective operation of the ZL-7901A controller. Ensure all connections are made by a qualified professional if you are unsure.

Physical Installation:

To install the controller into a panel or wall, prepare an opening with dimensions of 12.2 cm x 7.5 cm. Secure the device using the provided mounting brackets.

Close-up of the mounting bracket on the side of the ZL-7901A controller
Figure 3: Detail of the mounting bracket for panel installation.

Wiring Diagram:

Refer to the detailed wiring diagram below for connecting power, sensors, and controlled devices. The diagram illustrates connections for main and auxiliary heaters, humidity control, lighting, ventilation, egg turning motor, alarm, and SSR output. Note that the diagram shows 220V for power, but the device supports 100-240V AC input.

Detailed wiring diagram for LILYTECH ZL-7901A thermoregulator. Shows connections for power (220V), main heater, auxiliary heater, humidity control, lighting, ventilation, egg turning motor control, two alarm signals, SSR channel, temperature sensor, and humidity sensor.
Figure 4: LILYTECH ZL-7901A Thermoregulator Connection Diagram.

Wiring Diagram Key:

  • Terminals 1-2: Power Input (100-240V AC)
  • Terminals 3-4: Main Heater Control (7.5A/250V resistive load)
  • Terminals 5-6: Auxiliary Heater Control (7.5A/250V resistive load)
  • Terminals 7-8: Humidity Control (7.5A/250V resistive load)
  • Terminals 9-10: Lighting Control (7.5A/250V resistive load)
  • Terminals 11-12: Ventilation Control (7.5A/250V resistive load)
  • Terminals 13-14: Egg Turning Motor Control (7.5A/250V resistive load)
  • Terminals 15-16: Alarm 1 Signal (7.5A/250V resistive load)
  • Terminals 17-18: Alarm 2 Signal (7.5A/250V resistive load)
  • Terminals 19-20: SSR Output (20mA/10V DC Max)
  • Terminals 21-22: Temperature Sensor Input (NTC 5K/3470)
  • Terminals 23-24: Humidity Sensor Input (SHR04)

Ensure all wiring is done according to local electrical codes and safety standards. Double-check all connections before applying power.

LILYTECH ZL-7901A controller with temperature and humidity sensor connected via a white cable
Figure 5: ZL-7901A controller with the combined temperature and humidity sensor connected.

6. Operating Instructions

The ZL-7901A features a user-friendly interface with touch buttons and a large LCD for setting parameters and monitoring conditions. While specific programming steps are detailed in the full product manual, the general operation involves:

  • Power On/Off: Use the dedicated power button to turn the device on or off.
  • Navigation: Utilize the arrow keys (Up/Down) to navigate through menus and adjust values.
  • Function (Fn) Button: Access various functions and settings.
  • Setting Parameters: Enter desired temperature, humidity, and timer settings through the menu system. The PID algorithm will then maintain these conditions.
  • Monitoring: The LCD continuously displays current temperature and humidity readings.
  • Timer Functions: Program the three independent timers for specific operations such as egg turning cycles or lighting schedules.

For detailed programming instructions and advanced settings, please refer to the comprehensive user manual provided by LILYTECH.

7. Maintenance

To ensure the longevity and accurate performance of your LILYTECH ZL-7901A controller, follow these general maintenance guidelines:

  • Cleaning: Regularly wipe the display and exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Sensor Care: Keep the temperature and humidity sensors clean and free from dust or debris. Ensure they are not exposed to extreme physical stress or moisture beyond their operating limits.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Environment: Operate the device within its specified temperature and humidity ranges to prevent damage.

8. Troubleshooting

If you encounter issues with your ZL-7901A controller, consider the following general troubleshooting steps:

  • No Power: Check the power supply connection and ensure the power source is active. Verify the input voltage is within the 100-240V AC range.
  • Incorrect Readings: Ensure sensors are properly connected and clean. Check for any physical damage to the sensors or their cables.
  • Device Not Responding: Try restarting the device by cycling the power. If the issue persists, consult the full manual for factory reset procedures or contact support.
  • Alarms Triggering Unexpectedly: Review your set temperature and humidity parameters. Ensure the sensors are providing accurate readings and are not faulty.

For more specific error codes or complex issues, refer to the detailed troubleshooting section in the official LILYTECH ZL-7901A user manual.

9. User Tips

No specific user tips from reviews or Q&A were available for this product at the time of manual creation. Always ensure proper ventilation around the unit and sensors for optimal performance.

10. Warranty and Support

For information regarding product warranty, technical support, or service, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.