KKmoon HT107D

Contents

KKmoon HT107D Professional Outlet Socket Tester Instruction Manual

Model: HT107D | Brand: KKmoon

1. Introduction

The KKmoon HT107D Professional Outlet Socket Tester is an advanced device designed to quickly and accurately check the wiring and connection polarity of electrical sockets. It also features a Residual Current Device (RCD) / Ground Fault Circuit Interrupter (GFCI) test function, enhancing electrical safety by detecting leakage tripping. This compact, lightweight, and easy-to-use tester is an essential tool for ensuring the safety of electrical installations in various environments.

KKmoon HT107D Socket Tester Pro front view

Figure 1: Front view of the KKmoon HT107D Socket Tester Pro.

2. Safety Information

  • Always ensure the tester is in good working condition before use.
  • Do not attempt to open or modify the device.
  • This device is intended for testing standard electrical sockets. Do not use it for purposes other than its intended function.
  • When performing the RCD/GFCI test, be aware that it will trip the circuit breaker. Ensure all sensitive equipment connected to the circuit is safely shut down or disconnected before performing this test to avoid data loss or damage.
  • The voltage displayed by the tester is for reference only and may not be a highly accurate digital reading.
  • Keep out of reach of children.

3. Product Overview

The HT107D Socket Tester Pro features a clear LCD display with backlight for voltage readings and a series of LED indicators to show wiring status. It is designed for ease of use and quick interpretation of results.

3.1 Components

  • LCD Display: Shows voltage (L-N, N-E) and current (GFCI/RCD test).
  • LED Indicators: Six distinct patterns to indicate wiring status.
  • RCD/GFCI Test Button: Used to test the functionality of leakage protection switches.
KKmoon HT107D Socket Tester Pro in a kitchen environment

Figure 2: The HT107D Socket Tester Pro is suitable for various household and professional applications.

Professional Electricity Socket Tester for Home Socket Safety Check

Figure 3: The tester helps identify common wiring issues in various settings.

4. Specifications

FeatureSpecification
Brand NameKKmoon
ModelHT107D (EU Plug)
MaterialFlame Retardant ABS
Operating Voltage90~250V / 45~65Hz
Phase Voltage90~250V / 45~65Hz
Leakage Voltage0~99V / 45~65Hz
Accuracy± (2.0%+2)
RCD Test>30mA (EU/UK Plug)
RCD Working Voltage220V±20V
GFCI Test>5mA (US Plug)
GFCI Working Voltage110V±20V
Working Environment0℃ ~ 40℃, 20% ~75%RH
Storage Environment-10℃ ~ 50℃, 20% ~80%RH
Item Size68 * 65 * 60mm / 2.7 * 2.6 * 2.4in
Item Weight74g / 2.6oz
CertificationCE
Dimensions of the KKmoon HT107B Socket Tester Pro

Figure 4: Product dimensions for the HT107B model (similar for HT107D).

5. Setup

The KKmoon HT107D Socket Tester is designed for immediate use with a simple plug-and-play operation. No complex setup or battery installation is required as it draws power directly from the socket being tested.

5.1 Initial Inspection

  • Unpack the device and inspect it for any visible damage.
  • Ensure the plug type matches the sockets you intend to test (HT107D is for EU sockets).

6. Operating Instructions

Using the HT107D Socket Tester is straightforward. Follow these steps to test your electrical sockets:

6.1 Basic Socket Wiring Test

  1. Plug the HT107D tester directly into the electrical socket you wish to test.
  2. Observe the LED indicators on the front panel of the tester. The pattern of illuminated red lights will indicate the wiring status of the socket.
  3. Refer to the 'LED Indicator Patterns' table below to interpret the results.
  4. The LCD display will show the L-N (Live-Neutral) and N-E (Neutral-Earth) voltages. Note that these voltage readings are for reference only.

6.2 LED Indicator Patterns

The tester uses a combination of three red LED lights to indicate the wiring status. A white circle indicates the light is OFF, and a red circle indicates the light is ON.

Table of LED indicator patterns for socket wiring status

Figure 5: Reference chart for interpreting LED test results.

6.3 RCD/GFCI Test (Leakage Protection Test)

This test checks the functionality of the Residual Current Device (RCD) or Ground Fault Circuit Interrupter (GFCI) in your electrical system. This function is crucial for verifying the safety of your electrical circuits against leakage currents.

  1. Ensure no critical equipment is connected to the circuit you are testing, as this test will intentionally trip the circuit breaker.
  2. Plug the HT107D tester into the socket.
  3. Press the RCD/GFCI test button on the tester.
  4. If the RCD/GFCI is functioning correctly, the circuit breaker should trip, cutting power to the socket. The tester's display will go blank.
  5. If the circuit breaker does not trip, it indicates a potential fault with the RCD/GFCI or the wiring, and further investigation by a qualified electrician is recommended.
  6. Reset the circuit breaker after the test.
Diagram showing RCD test button and explanation of tripping

Figure 6: Explanation of RCD test functionality. Be cautious not to accidentally press the RCD button during normal voltage checks.

7. Troubleshooting

  • No lights or display when plugged in: Ensure the socket has power. If other devices work in the socket, the tester might be faulty.
  • Incorrect wiring indication: If the tester indicates a wiring fault (e.g., Open Ground, Reverse Polarity), do not use the socket until it has been inspected and corrected by a qualified electrician.
  • RCD/GFCI test does not trip the breaker: This is a serious safety concern. Immediately stop using the circuit and have it inspected by a qualified electrician.
  • Voltage reading seems off: Remember that the voltage displayed is for reference only and may not be highly accurate. For precise voltage measurements, use a dedicated multimeter.

8. User Tips

  • Regular Checks: Periodically check critical sockets in your home or workplace, especially those connected to sensitive or high-power appliances.
  • Before Appliance Use: It's good practice to quickly test a socket before plugging in a new or expensive appliance, particularly in older buildings.
  • Travel Companion: If you have the appropriate model (e.g., HT107E for UK, HT107B for US), these testers can be useful when traveling to quickly check socket safety in unfamiliar accommodations.
  • New Installations: Always verify new or recently repaired electrical installations with a socket tester to confirm correct wiring.

9. Maintenance

  • Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the tester in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Avoid Impact: Protect the device from drops and impacts, which could damage internal components or the display.

10. Warranty and Support

The KKmoon HT107D Socket Tester comes with a 12-month manufacturer's limited warranty for defective items from the date of receipt. Accessories typically come with a 3-month warranty. This warranty does not cover items damaged due to misuse or unauthorized modifications.

For warranty claims or technical support, please contact your retailer or the manufacturer with your order details and a description of the issue. Do not attempt to repair the device yourself, as this may void the warranty.

© 2023 KKmoon. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.