Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your new Universal Remote Control for Skyworth Smart TVs. This remote is designed to be compatible with a wide range of Skyworth television models, offering a seamless replacement or secondary control option without the need for complex programming.
Setup
1. Battery Installation
To begin using your remote control, you must first install the batteries. The remote requires two AAA batteries (not included).
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
2. Initial Setup (No Programming Required)
This remote control is pre-programmed for compatible Skyworth Smart TV models. No additional programming or setup is required. Once batteries are installed, point the remote directly at your TV and begin operation.
Operating Instructions
The remote control features standard buttons for TV operation. Ensure a clear line of sight between the remote's IR emitter and your TV's IR receiver for optimal performance.
- POWER (Red Button): Turns the TV on or off.
- Number Buttons (0-9): Directly select channels.
- P.M. / S.M. / ZOOM: Picture Mode, Sound Mode, and Zoom functions.
- MENU: Access the TV's main menu.
- SOURCE: Select input sources (HDMI, AV, etc.).
- Navigation Buttons (Up, Down, Left, Right, OK): Navigate through menus and confirm selections.
- EXIT: Exit current menu or function.
- RETURN/BACK: Go back to the previous screen or channel.
- LIST / INFO: Display channel list or program information.
- VOL +/-: Adjust volume up or down.
- CH +/-: Change channels up or down.
- HOME: Access the Smart TV home screen.
- MTS: Multi-channel Television Sound.
- 3D / REC / GUIDE / FAV. / C.C. / FREEZE: Special function buttons for 3D mode, recording, electronic program guide, favorite channels, closed captions, and freezing the screen.
- Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward, Previous, Next): Control media playback.
- Colored Buttons (Red, Green, Yellow, Blue): Access specific functions as indicated on your TV screen or in the TV's manual.
Maintenance
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid getting moisture into the remote's openings.
Troubleshooting
- Remote not responding:
- Check if the batteries are installed correctly with the correct polarity (+/-).
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the TV's IR receiver.
- Point the remote directly at the TV.
- Some functions not working:
- Verify that your TV model is listed in the compatibility section. While this is a universal remote for Skyworth, specific advanced functions might vary slightly between TV models.
- Consult your TV's original manual for specific button functions if they differ from standard operation.
Specifications
| Feature | Specification |
|---|---|
| Product Name | Remote Controller |
| Type | Remote Controller for SKYWORTH Smart TV |
| Model | For SKYWORTH (Universal Replacement) |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 3 |
| Power Source | 2 x AAA batteries (not included) |
| Material Process | ABS |
| Dimensions (L x W x H) | Approx. 10 cm x 5 cm x 3 cm (based on package dimensions) |
| Weight | Approx. 0.1 kg (based on package weight) |
Compatibility
This remote control is compatible with the following Skyworth Smart TV models and series:
- Coocaa 40E36YC
- Coocaa 40E39YC
- E2000 Series (32E2000, 40E2000, 43E2000, 50E2000, 55E2000)
- E2000D Series (32E2000D, 40E2000D, 43E2000D, 50E2000D, 55E2000D)
- E200A Series (32E200A)
- 3000 Series / 3300 Series (50E3000, 50E3300)
- E380i Series (32E380i, 40E380i, 43E380i, 49E380i)
- E390i Series (32E390i, 40E390i, 43E390i, 49E390i)
- E69 Series (42E69, 50E69, 55E69)
- E400 Series (40E400, 43E400, 50E400)
- All Skyworth E790 Series
Note: Compatibility with other brands like "Oceanic TV" or specific models like "MT32CH03" is not guaranteed unless explicitly listed. This remote is primarily designed for Skyworth TVs.
User Tips
- Always ensure a direct line of sight between the remote and your TV for reliable signal transmission.
- If the remote feels unresponsive, try replacing the batteries first, ensuring correct polarity.
- Keep the remote clean and free from dust and spills to prolong its lifespan.
Warranty and Support
For any issues or concerns regarding your remote control, please contact the seller or manufacturer for assistance. Provide your purchase details and a description of the problem to facilitate support.