SUNSHINE SS-917C

Contents

SUNSHINE SS-917C Dust Free Working Room

Instruction Manual

Model: SS-917C | Brand: SUNSHINE

1. Introduction

Thank you for choosing the SUNSHINE SS-917C Dust Free Working Room. This advanced anti-dust bench is designed to provide a clean and controlled environment for delicate electronic device repair and refurbishing, particularly for tasks involving phone and iPad screens. Its features, including adjustable lighting and multi-layer filtration, ensure high precision and efficiency in dust-sensitive operations.

For detailed video operation methods, please refer to the official SUNSHINE YouTube channel or website. A comprehensive user manual is also available in PDF format: User Manual (PDF).

2. Safety Precautions and Important Notes

  • Always read this instruction manual carefully before use to ensure safe operation. Keep this manual for future reference.
  • Working Environment: Ensure your work area is not excessively dusty. Operating in a very dusty place may reduce the effectiveness of the dust-free working room and clog filters quickly.
  • Cleanliness: Regularly clean the interior of the dust-free bench. A dirty interior can cause dust to circulate, hindering the dust-free effect.
  • Cleaning Tools: When cleaning, use lint-free materials, such as suede cloths, to avoid introducing new particles. Ensure your hands, gloves, and tools are also clean.
  • Airflow: The effectiveness is not solely dependent on maximum airflow. Excessive wind can cause turbulence, making dust fly around. Adjust the wind speed to an appropriate level for optimal performance and to prolong motor life.
  • Filter Maintenance: The top and bottom filter layers are washable but have a limited lifespan. Replace them if they become ineffective after multiple washes or prolonged use. The middle filter is not washable and must be replaced when it reaches its service life.

3. Package Contents

The SUNSHINE SS-917C Dust Free Working Room package includes the following items:

  • Main Host Unit (Dust-free working table)
  • Silicone Pad
  • Power Cord (3C certified thickened grounding power cord)
  • Filter Set (Outer, Middle, Inner filters)
  • Additional components for assembly (small white rubber ring, screws, gaskets)
Components of the Sunshine SS-917C Dust Free Working Room
Figure 1: Included components of the SS-917C Dust Free Working Room.

4. Product Features

  • Enhanced Filtration: Features a three-layer filtration system (Outer, Middle, Inner filters) to effectively intercept PM2.5 particles and ensure a high purification rate.
  • Dual Fan System: Equipped with double fans for efficient air circulation and dust removal.
  • Dual LED Lighting: Includes two types of LED lights for different working conditions:
    • Green Light: Highlights tiny dust particles, making them visible for thorough cleaning.
    • White Light: Provides bright, clear illumination for general working and precise operations like OCA lamination.
  • Adjustable LED Brightness: The LED brightness can be adjusted by 20% to suit various tasks and user preferences.
  • Adjustable Wind Speed: A knob allows for precise control over the fan speed, enabling adjustment between strong and weak wind to prevent turbulence.
  • Stable Design: Features non-slip feet to ensure the unit remains stable during operation.
  • Durable Power Cord: Comes with a 3C certified thickened grounding power cord, designed for high power and safe use.
Diagram showing double fan, dual LED, and three layers of filtration
Figure 2: Key upgraded features of the SS-917C.
Diagram illustrating the three layers of filtration
Figure 3: Three-layer filtration system for health protection.

5. Setup Instructions

Follow these steps to set up your SS-917C Dust Free Working Room:

  1. Place the small white rubber ring onto the mounting post.
  2. Insert the screws into the black rubber feet.
  3. Align the screws with the mounting post and tighten them securely.
  4. Connect the 3C certified thickened grounding power cord to the unit and a suitable power outlet.
Image of the 3C certified thickened grounding power cord
Figure 4: Connect the power cord.

6. Operating Instructions

The SS-917C is designed for various precision tasks, especially screen cleaning and OCA lamination for mobile phones and tablets.

6.1 Power On and Initial Adjustment

  1. Turn on the power switch.
  2. Adjust the wind speed using the knob to a suitable level. Avoid excessively strong wind that might cause turbulence.
  3. Select the desired light mode (Green or White) using the light switch.
  4. Adjust the LED brightness using the dedicated knob if needed.
Close-up of the wind speed adjustment knob and power switch
Figure 5: Wind speed adjustment and power switch.
Close-up of LED brightness adjustment knob and light switch
Figure 6: LED brightness adjustment and light mode switch.

6.2 Dust Detection and Cleaning (Green Light Mode)

Use the green light mode to effectively identify dust particles on screens or other surfaces.

  1. Switch the light to green mode.
  2. Place the item to be cleaned on the silicone pad within the working area.
  3. The green light will illuminate tiny dust particles, making them clearly visible.
  4. Clean the screen thoroughly using appropriate lint-free cleaning materials.
Front view of the SS-917C with green light
Figure 7: Green light mode for dust detection.
Green light showing dust particles on a screen
Figure 8: Green light highlights dust for effective cleaning.

6.3 General Work and OCA Lamination (White Light Mode)

After cleaning, switch to white light mode for general repair work or precise tasks like OCA lamination.

  1. Switch the light to white mode.
  2. Proceed with your repair or lamination tasks under the bright, clear illumination.
Front view of the SS-917C with white light
Figure 9: White light mode for general work and OCA lamination.
Highlight white light illuminating tiny bubbles
Figure 10: Highlight white light for precision tasks.

6.4 Video Demonstration

Video 1: Demonstration of the SS-917C Dust Free Working Room in action, showing light modes and cleaning process.

7. Maintenance

Proper maintenance ensures the longevity and effectiveness of your SS-917C Dust Free Working Room.

  • Filter Cleaning/Replacement:
    • The outer and inner filter layers are removable and washable. Clean them regularly.
    • If the washable filters become ineffective after multiple cleanings or prolonged use, they must be replaced.
    • The middle filter is NOT washable and must be replaced when it reaches the end of its service life.
  • General Cleaning: Keep the entire unit, especially the working surface and interior, clean from dust and debris. Use lint-free cloths for cleaning.
Hand removing a filter, showing it's removable and washable
Figure 11: Removable and washable filter for easy maintenance.

8. Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Dust-free effect is not ideal.
  • Work environment is too dusty.
  • Interior of the bench is dirty.
  • Cleaning tools/materials are not lint-free.
  • Filters are clogged or at end of life.
  • Ensure a clean surrounding work area.
  • Regularly clean the inside of the bench.
  • Use only lint-free cloths and clean tools.
  • Clean or replace filters as necessary.
Dust flying around during operation.Wind speed is too high, causing turbulence.Adjust the wind speed knob to a lower setting until dust no longer flies around.
Green light not effectively showing dust.LED brightness is too low.Adjust the LED brightness knob to increase illumination.

9. Specifications

ParameterValue
Model NumberSS-917C
ApplicationComputer Tool Kit (Phone/iPad Refurbish Repair)
MaterialMetal
TypeCombination
DIY SuppliesElectrical
Power InputAC 110V-220V
Rated Current750mA
Product Size35 x 23.2 x 31 cm
Working Size34.5 x 23 cm
Net Weight5.025 kg
Gross Weight5.795 kg
Package Size37 x 29 x 39 cm

10. User Tips

  • The SS-917C is highly effective for glass re-gluing and other screen repair tasks, providing bright illumination and minimizing dust intrusion.
  • While it significantly simplifies the process, especially in smaller workspaces, it's important to maintain a generally clean environment for optimal results.
  • This device is well-suited for applying protective films to screens, creating a dust-free space for precise application.

11. Warranty and Support

Guangzhou Sunshine Electronics Technology Co., Ltd. ensures that this product meets industry standards and Sunshine quality inspection standards.

For any inquiries or support, please contact:

  • Manufacturer: Guangzhou Xinxun Xiuxiu Electronic Technology Co., Ltd.
  • Brand Owner: Guangzhou Xinxun Electronic Technology Co., Ltd.
  • Address: No.283, Longxi Road, Liwan District, GuangZhou, China
  • Website: www.exinxun.com
  • Customer Service Hotline: 400-038-0255

Special Note: Product upgrades may occur without prior notice. The actual product received will take precedence. All contents of this manual have been carefully verified. In case of any printing errors, omissions, or misunderstandings, the company reserves the right of final interpretation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.