HOBBYWING WP-S16-RTR

Contents

HOBBYWING 25A WP-S16-RTR Brushless Speed Controller ESC User Manual

Model: WP-S16-RTR

1. Product Overview

The HOBBYWING 25A WP-S16-RTR is a waterproof brushless electronic speed controller (ESC) designed for 1/16 and 1/18 scale RC cars and trucks. It features a compact design, robust performance, and programmable settings to suit various driving conditions.

HOBBYWING 25A WP-S16-RTR Brushless ESC with T-plug, banana plugs, and switch
Figure 1: HOBBYWING 25A WP-S16-RTR Brushless ESC with T-plug, banana plugs, and switch.
Overall view of the ESC, manual, and accessories including cable ties and adhesive label
Figure 2: Package contents including the ESC, manual, and accessories.

2. Specifications

FeatureSpecification
Continuous/Burst Current25A/90A
Resistance0.005 ohm
Applicable Car Scale1/16, 1/18
Motor Limit (2S Lipo / 6 cells NiMH)On-road: ≥12T; Off-road: ≥18T; 2040 Size Motor
Motor Limit (3S Lipo / 9 cells NiMH)On-road: ≥18T; Off-road: ≥24T; 2040 Size Motor
Cooling Fan VoltageWithout Cooling Fan
Built-in BEC6V/1A (Switch Mode)
Program PortRx Wire
Dimensions (L*W*H)36mm * 28mm * 21mm
Net Weight38g
MaterialNylon
Batteries IncludedNo
Side view of the ESC with dimensions 28mm, 36mm, 20mm indicated
Figure 3: ESC dimensions (Note: Image indicates 20mm height, while text states 21mm. Please refer to the text specification for precise measurement).
The ESC on a digital scale showing a weight of 0.039kg
Figure 4: Weight of the ESC (0.039kg).

3. Setup and Installation

  1. Connect to Motor: Connect the three motor wires to the ESC's output terminals. The ESC uses 3.5mm banana plugs for motor connection.
  2. Close-up of 3.5mm banana plugs for motor connection
    Figure 5: 3.5mm banana plugs for motor connection.
  3. Connect to Battery: Connect the battery to the ESC's input wires. The default battery connector is a T-plug. Other plug types such as JST, Mini Tamiya, Tamiya, TRX, XT30, and XT60 may be available depending on the specific variant.
  4. Image showing various battery plug types including XT60, TRX, T, Tamiya, Mini Tamiya, JST, XT30
    Figure 6: Various battery plug types. The default is T-plug.
  5. Connect to Receiver: Plug the ESC's Rx wire into the throttle channel of your RC receiver.
  6. Mounting: Secure the ESC in your vehicle using the provided adhesive label paper or other suitable mounting methods. Ensure adequate airflow if possible, although the unit is designed to operate without a cooling fan.

4. Operating Instructions

The ESC features a switch with a 'Set button' for programming. Refer to the programmable items table below for available settings and their factory defaults.

Close-up of the ESC switch, showing 'Set button', 'switch', and 'waterproof sheath'
Figure 7: ESC switch with 'Set button' for programming.

4.1 Programmable Items

The following table outlines the programmable options for your ESC. Options with a black background and white text indicate the factory default settings.

Table of programmable items for the ESC, showing Running Mode, Drag Brake Force, Low Voltage Cutoff, Start Mode (Punch), and Max. Brake Force with various options
Figure 8: Programmable settings table.
Programmable ItemOption 1Option 2Option 3Option 4Option 5Option 6Option 7Option 8
1. Running ModeFwd/BrFwd/Rev/Br
2. Drag Brake Force0%5%10%15%20%25%30%40%
3. Low Voltage CutoffDisable2.6V/Cell2.8V/Cell3.0V/Cell3.2V/Cell3.4V/Cell
4. Start Mode (Punch)Level 1Level 2Level 3Level 4
5. Max. Brake Force25%50%75%100%

5. Maintenance

The WP-S16-RTR ESC is designed to be waterproof, indicated by the 'WATERPROOF' label and waterproof sheath around the switch. This provides protection against splashes and light moisture, making it suitable for use in various conditions.

  • After use in wet conditions, ensure the ESC is thoroughly dried before storage.
  • Regularly inspect all wire connections for any signs of wear or damage.
  • Keep the ESC clean from dirt and debris to ensure optimal performance and heat dissipation.

6. Troubleshooting

No specific troubleshooting guide is provided in the product information. If you encounter issues, please consider the following general steps:

  • Check all connections: Ensure all wires (motor, battery, receiver) are securely connected.
  • Verify battery charge: Make sure your battery is fully charged and in good condition.
  • Review programmable settings: Incorrect settings (e.g., Low Voltage Cutoff) can cause unexpected behavior. Refer to the 'Programmable Items' table and adjust as needed.
  • Inspect for physical damage: Look for any visible damage to the ESC or its components.

If problems persist, please contact the seller or manufacturer for further assistance.

7. Warranty and Support

This product comes with a 12-month manufacturer's limited warranty for defective items. Defective items must be reported and returned within the warranty period, preferably in their original packaging.

The warranty does not cover items with expired warranty periods. For warranty claims, you must provide your order number and a description of the defect.

For support inquiries, please contact the seller, BYRC Store, through your purchase platform.

8. User Tips

  • Always ensure your battery connector matches the ESC's connector type. If you require a different plug type than the default T-plug, confirm with the seller before purchase.
  • When programming, carefully review the options to avoid unintended settings that could affect performance or safety.
  • Although waterproof, avoid prolonged submersion or exposure to corrosive liquids to maximize the lifespan of your ESC.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.