Prozor 1x3 SPDIF Toslink Optical Splitter

Contents

PROZOR SPDIF/Toslink Digital Optical Audio Splitter 1x3 User Manual

Model: 1x3 SPDIF Toslink Optical Splitter

Introduction

The PROZOR SPDIF/Toslink Digital Optical Audio Splitter 1x3 is designed to allow a single digital optical Toslink source to be split into three optical Toslink (SPDIF) input devices. This device is ideal for connecting your audio source to multiple receivers, such as an AV amplifier, soundbar, or a digital-to-analog audio converter, without any loss of audio quality.

It supports various audio formats including LPCM2.0, DTS, and Dolby-AC3, making it compatible with a wide range of audio equipment like PS3, XBOX, Blue-Ray DVD players, HDTVs, and power amplifiers.

Package Contents

Please check the package contents upon opening to ensure all items are present:

  • 1 x Toslink Splitter Unit
  • 1 x USB Power Cable
  • 1 x 1m Toslink Cable (Optical Cable)
  • 1 x Operation Manual (this document)
Diagram showing the package contents: Toslink Splitter, 1m Optical Cable, USB Power Cable, and User Manual.
Figure 1: Package Contents

Product Features

  • One optical fiber signal input, split to three SPDIF/Toslink signal receiving devices.
  • Supports audio formats: LPCM2.0/DTS/-AC3.
  • Output distance up to 40m when using optical fiber cables with loss less than 0.2Db/m.
  • Over-voltage protection can prevent the damage caused by connecting an unmatched power adapter to the machine.
  • LED status indication for easy monitoring.
  • No loss of audio quality.
  • Compact design with an aluminum alloy shell.

Product Diagram

Diagram of the PROZOR Digital Audio Splitter showing its ports. The input side has a Micro USB port for Power, an LED indicator, and a Toslink Input. The output side has three Toslink Output ports labeled 1, 2, and 3.
Figure 2: Front and Rear Panel Layout

Input Side:

  • Micro USB: Power input port.
  • LED: Power/Status indicator.
  • Toslink Input: Connect your digital audio source here.

Output Side:

  • Toslink Output 1, 2, 3: Connect to your audio receiving devices.

Setup Instructions

Follow these steps to set up your PROZOR SPDIF/Toslink Digital Optical Audio Splitter:

  1. Connect the Audio Source: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, XBOX, Blue-Ray DVD player) to the "Input" port of the splitter.
  2. Connect Output Devices: Use Toslink optical cables to connect up to three audio receiving devices (e.g., AV amplifier, soundbar, optical Bluetooth transmitter, DAC audio converter) to the "Output 1", "Output 2", and "Output 3" ports of the splitter.
  3. Connect Power: Connect the provided USB power cable to the "Micro USB" port on the splitter. Plug the other end of the USB cable into a suitable USB power source (e.g., a USB wall adapter, TV USB port, or computer USB port).
  4. Power On: Once power is connected, the LED indicator on the splitter will illuminate, indicating that the device is powered on and ready for use.
  5. Verify Audio: Turn on your audio source and receiving devices. Select the correct optical input on your receiving devices to enjoy the audio.
Connection diagram showing a TV connected to the splitter's input, and the splitter's outputs connected to a Sound bar, an Optical Bluetooth Transmitter, and a DAC Audio Converter.
Figure 3: Typical Connection Diagram
Example setup showing a TV connected to the splitter, which then connects to a soundbar and a headphone charging dock, allowing audio to be played through both simultaneously.
Figure 4: Example Setup with Soundbar and Headphones

Operating Instructions

The PROZOR SPDIF/Toslink Digital Optical Audio Splitter operates automatically once connected and powered on. There are no manual controls or settings on the device itself.

  • Ensure all optical cables are securely connected to prevent signal loss.
  • The LED indicator will show the power status. If it's not lit, check the USB power connection.
  • The splitter will distribute the single input audio signal to all three output ports simultaneously.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Handle optical cables with care. Avoid bending them sharply or exposing them to excessive force, as this can damage the fiber optic core.
  • Power: Disconnect power when the device is not in use for extended periods.

Troubleshooting

Problem Possible Cause Solution
No audio output from any device.
  • No power to the splitter.
  • Incorrect optical cable connection.
  • Audio source not sending signal.
  • Receiving device not set to optical input.
  • Ensure USB power cable is connected and LED is lit.
  • Check all Toslink cable connections are secure and correctly inserted.
  • Verify the audio source is active and outputting an optical signal.
  • Select the correct optical input on your soundbar/amplifier.
Audio output from some devices, but not others.
  • Faulty optical cable to the affected device.
  • Issue with the specific receiving device.
  • Try swapping optical cables to isolate a faulty cable.
  • Test the affected receiving device with a direct connection to the audio source if possible.
Distorted or intermittent audio.
  • Damaged optical cable.
  • Loose connection.
  • Unsupported audio format.
  • Replace optical cables if damaged.
  • Ensure all connections are firm.
  • Verify your audio source is outputting a supported format (LPCM2.0/DTS/-AC3).

If the problem persists after trying these solutions, please contact customer support.

Specifications

Feature Specification
Input 1 x Toslink Optical
Output 3 x Toslink Optical
Supported Audio Formats LPCM2.0/DTS/-AC3
Peak Wavelength 650nm
Max Baud Rate 16Mbps
Output Cable Distance ≤40m (using optical fiber cable loss less than 0.2Db/m)
Max Working Current 100mA
Power Adapter Format Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1000mA
Operating Temperature Range 0 to +40℃
Operating Humidity Range 5 to 90%RH (No Condensation)
Dimensions (L x W x H) 48 x 48 x 20 mm
Weight 70g
Shell Material Aluminum Alloy
Certification CE
Image showing the compact dimensions of the splitter, 48x48x20 mm, and highlighting its aluminum alloy material shell.
Figure 5: Device Dimensions and Material

User Tips

  • DTS Compatibility: The splitter itself supports DTS, but your receiving devices (soundbar, amplifier) must also support DTS to decode and play the audio correctly. The splitter simply passes the signal.
  • Cable Quality: For optimal performance and to achieve the maximum output distance, use high-quality optical fiber cables with low signal loss (less than 0.2Db/m).
  • Power Source: While a USB wall adapter is recommended, the splitter can often be powered by a USB port on your TV or other devices, provided it supplies sufficient power (DC5V/1000mA).

Warranty and Support

For warranty information and technical support, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt for warranty claims.

© 2023 PROZOR. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.