RETEKESS TD017

Contents

RETEKESS TD017 Wireless Call Button User Manual

Model: TD017 | Brand: RETEKESS

1. Introduction and Notice

Thank you for choosing the Simple Universal Call Button! This product features a minimalist design, is easy to operate and install, and is suitable for various basic calling scenarios. To ensure smooth use, please read this instruction manual before use. If you have any questions, please refer to the FAQ or contact after-sales service.

This manual provides detailed instructions for the RETEKESS TD017 Wireless Call Button, designed for efficient communication in various service environments.

2. Product Structure

2.1 External Structure

  • Housing: ABS plastic material, compact and lightweight.
  • Call Button: Single-point button on the front, made of soft and comfortable silicone.
  • Indicator Light: Embedded LED light in the center of the button to indicate the call status.
  • Battery Compartment: Screw-down design on the back, with one built-in specific model battery.
  • Mounting Components: High-adhesion adhesive on the back, supports adhesive installation without additional tools.

2.2 Internal Structure

  • Simple Wireless Module: Low-power design, stable signal, compatible with universal call hosts.
  • Trigger Switch: Linked with the button to ensure activation upon pressing.
Top view of the TD017 Wireless Call Button
Figure 1: Top view of the TD017 Wireless Call Button, showing the central call button and RETEKESS branding.
Bottom view of the TD017 Wireless Call Button with product label
Figure 2: Bottom view of the TD017 Call Pager, displaying model number TD017, battery type CR2032*1, FCC ID, and certification marks (CE, FC, RoHS).

3. Function Introduction

  • One-button Call: A simple press of the button triggers a call signal; easy to use, even for the elderly and children.
  • Status Indicator: The LED flashes (red) during a call and automatically turns off after a response.
  • Low Power Consumption Design: Extremely low standby power consumption; a single battery lasts for 6000 cycles.
  • Easy Installation: Adhesive backing design; 3-second installation; easily repositionable.
  • Wide Compatibility: Supports pairing with most general-purpose call hosts, adapting to basic call needs.
Finger pressing the TD017 call button, showing a red indicator light
Figure 3: Demonstrates the sensitive touch button with a red indicator light illuminating upon press.
Diagram illustrating the long battery life of the TD017 call button with a CR2032 battery
Figure 4: Visual representation of the TD017's long working time, powered by a CR2032 lithium coin cell battery, lasting up to 1 year.

4. Applicable Scenarios

The TD017 Wireless Call Button is ideal for various basic call and assistance scenarios, including:

  • Small restaurants
  • Convenience stores
  • Offices
  • Homes
  • Small clinics and hospitals
  • Hookah lounges, coffee shops, hotels, bars, clubs
Diagram showing a customer in a restaurant using the call button to summon staff
Figure 5: Example of the call button in a restaurant setting, illustrating how a customer can call for service (order, bill, water, manager).
Flowchart of call button usage: diner presses button, host receives signal, service staff responds
Figure 6: Step-by-step illustration of the call process: 1. Diners press the call button. 2. Host receives the signal. 3. Service staff responds.

5. Instructions for Use

5.1 Installation Preparation

  1. Unscrew the battery compartment cover on the back.
  2. Insert one CR2032 battery with the positive terminal facing up, then tighten the cover.
  3. Select a flat, dry mounting surface. Clean the surface thoroughly.
  4. Peel off the protective film from the adhesive backing on the call button.
  5. Attach the call button firmly to the desired surface.

5.2 Device Pairing

The TD017 call button is compatible with all Retekess display receivers and watch receivers.

  1. Press and hold the call button for 5 seconds. The indicator light will flash rapidly, indicating that the device has entered pairing mode.
  2. Follow the instructions for your specific Retekess call host (display receiver or watch receiver) to initiate pairing.
  3. Once the call host displays "Pairing Successful," the indicator light on the call button will turn off, completing the pairing process.
TD017 call button compatible with various Retekess display and watch receivers
Figure 7: The TD017 call button is compatible with a range of Retekess display and watch receivers for versatile system integration.

5.3 Call Operation

To send a call signal:

  1. Briefly press the call button on the front.
  2. The LED light will flash, indicating that a call signal has been sent.
  3. The LED light will automatically turn off after the call is answered by the receiver.

5.4 Battery Replacement

If the indicator light does not illuminate or flashes weakly after pressing the button, the battery is low and needs replacement.

  1. Unscrew the battery compartment cover on the back of the call button.
  2. Remove the old CR2032 battery.
  3. Insert a new CR2032 battery with the positive terminal facing up.
  4. Tighten the battery compartment cover securely.

6. Maintenance

  • Keep the device clean and dry. Wipe with a soft, dry cloth if necessary.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Do not use harsh chemicals or abrasive cleaners on the device.

7. Troubleshooting

  • Button not responding / Indicator not lighting up:
    • Check battery level. Replace battery if low (refer to 5.4 Battery Replacement).
    • Ensure battery is inserted correctly with positive terminal up.
  • Call signal not received by host:
    • Ensure the call button is properly paired with the receiver (refer to 5.2 Device Pairing).
    • Check the distance between the call button and the receiver. The effective range is 80-100m with a watch receiver. Obstacles can reduce range.
    • Verify the receiver is powered on and functioning correctly.
  • Accidental activation:
    • Ensure the button is not placed where it can be accidentally pressed.

8. Specifications

AttributeValue
Model NumberTD017
Brand NameRETEKESS
ModulationAM
Frequency433.92 MHz
Encoding method1527 learning code
Operating current11mA
Operating voltage3V
Output power0.033W
Standby power consumption<0.2uA
BatteryCR2032*1
Battery capacity210mAh
Button typeTouch
Size66*62*16mm
Battery IncludedYes
CertificationCE, FCC
OriginMainland China

9. Package Contents

Each package typically includes:

  • 1 x TD017 Call Button
  • 1 x Double-sided tape (for installation)
  • 1 x CR2032 Battery (pre-installed or included separately)
Image showing five TD017 call buttons in a package
Figure 8: A typical package containing multiple TD017 Wireless Call Buttons.

10. User Tips

  • Installation Surface: For optimal adhesion, ensure the mounting surface is clean, dry, and smooth before applying the double-sided tape.
  • Battery Check: If the button seems unresponsive, always check the battery first. A weak flash or no light indicates a low battery.
  • Range Optimization: While the button has a good range, consider potential signal interference from thick walls or large metal objects when positioning the button and receiver.
  • Pairing: If you are having trouble pairing, ensure the call host is in pairing mode and the button is held for the full 5 seconds until the light flashes rapidly.

11. Precautions

  • Avoid direct sunlight or high-temperature, humid environments during installation.
  • Do not press or drop the device forcefully to avoid damaging internal components.
  • Ensure the battery is installed correctly with the positive and negative terminals aligned to avoid short circuits.
  • When not in use for extended periods, remove the battery to prevent leakage and damage to the device.

12. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact RETELESS customer service:

The product is certified with CE, FC, and RoHS standards.

RETEKESS logo and CE FC RoHS certification marks
Figure 9: RETEKESS branding and product certifications (CE, FC, RoHS).

Manufactured by Henan Eshow Electronic Commerce Co., Ltd in Mainland China.

A PDF user manual is available for download. Please refer to the official RETEKESS website for the latest version: TD017 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.