DragonHawk Mast P10 Tattoo Pen User Manual

1. Introduction

Thank you for choosing the DragonHawk Mast P10 Tattoo Pen. This professional rotary tattoo machine is designed for precision work in permanent makeup, including eyebrows, lips, and eyeliner, as well as small body tattoo designs. Featuring a powerful coreless motor and a robust alloy construction, the Mast P10 offers reliability and ease of use. Please read this manual thoroughly before operation to ensure safe and effective use of your device.

2. Safety Information

Always prioritize safety when using tattoo equipment. This device is intended for professional use by trained individuals. Improper use can lead to injury or infection.

• Ensure all equipment is properly sterilized before each use.
• Always wear appropriate personal protective equipment, including gloves.
• Use only compatible and sterile tattoo cartridge needles.
• Do not operate the machine if it appears damaged or malfunctioning.
• Keep the device away from water and other liquids to prevent electrical hazards.
• Disconnect the power supply when not in use or during maintenance.

3. Package Contents

The DragonHawk Mast P10 Tattoo Pen package typically includes:

• Mast P10 Tattoo Pen
• RCA Connection Cable
• Spare O-rings (if applicable)

Note: Power supply and tattoo cartridge needles are usually sold separately.

4. Setup Instructions

Follow these steps to set up your Mast P10 Tattoo Pen:

1. Unpack the Device: Carefully remove the Mast P10 Tattoo Pen from its packaging.
2. Attach Needle Cartridge: Insert a sterile tattoo cartridge needle into the front opening of the pen. Twist gently to secure it in place.
3. Connect RCA Cable: Plug one end of the RCA connection cable into the RCA port at the back of the tattoo pen.
4. Connect to Power Supply: Plug the other end of the RCA cable into the 'OUT' port of a compatible tattoo power supply. Ensure the power supply is turned off before connecting.
5. Power On: Turn on your tattoo power supply.

For a visual guide, please refer to the product demonstration video below:

5. Operating Instructions

Once the Mast P10 is set up, you can begin operation:

1. Adjust Voltage: Use the controls on your power supply to set the desired operating voltage. The recommended operating voltage for the Mast P10 is 5-8V.
2. Test Functionality: Before applying to skin, gently press the foot pedal (if using one) or activate the power supply to ensure the needle moves smoothly and consistently.
3. Perform Procedure: Proceed with your tattooing or permanent makeup procedure, maintaining proper technique and hygiene.
4. Adjust Needle Depth: The needle depth can be adjusted by rotating the grip of the tattoo pen.
5. Power Off: After use, turn off the power supply and disconnect the RCA cable.

6. Maintenance and Care

Proper maintenance ensures the longevity and hygienic operation of your Mast P10 Tattoo Pen.

• Cleaning: The tattoo machine frame part is separate from the grip, allowing for easy cleaning of the inner components. Disassemble the grip from the machine body and clean all parts with appropriate sterilizing solutions.
• Lubrication: Periodically apply a small amount of machine lubricant to moving parts as recommended by professional tattoo equipment maintenance guidelines.
• Storage: Store the tattoo pen in a clean, dry, and sterile environment when not in use.
• Inspection: Regularly inspect the RCA connection and other components for any signs of wear or damage. Replace worn parts immediately.

7. Troubleshooting

If you encounter issues with your Mast P10, try the following:

• Machine Not Starting:
  • Check if the power supply is turned on and functioning correctly.
  • Ensure the RCA cable is securely connected to both the pen and the power supply.
  • Verify that the power outlet is working.
• Inconsistent Needle Movement:
  • Check if the needle cartridge is properly seated and not damaged.
  • Ensure the operating voltage is within the recommended 5-8V range.
  • Inspect the RCA cable for any damage or loose connections.
• Excessive Vibration or Noise:
  • Ensure all parts of the pen are securely assembled.
  • Check for any foreign objects or debris inside the machine.
  • Verify that the needle cartridge is not bent or damaged.

If problems persist, contact customer support for assistance.

8. Specifications

Technical specifications for the DragonHawk Mast P10 Tattoo Pen:

9. User Tips

No specific user tips are available from provided reviews or Q&A content at this time. Always follow professional tattooing and permanent makeup best practices.

10. Warranty and Support

For information regarding warranty coverage, technical support, or service, please contact the seller or refer to the official DragonHawk website. Keep your purchase receipt as proof of purchase.