1. Introduction
The FEELWORLD LUT6 is a 6-inch ultra-bright field monitor designed for DSLR and mirrorless cameras. It features a 2600nits display, HDR monitoring, 3D LUT support, and a full HD 1920x1080 IPS touch screen. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your LUT6 monitor.

2. Package Contents
Please check the package contents upon arrival to ensure all items are present and undamaged. The battery is NOT included.
- FEELWORLD LUT6 Monitor
- Micro HDMI Cable
- Tilt Arm
- Operation Manual (this document)

3. Setup
3.1 Mounting the Monitor
The LUT6 monitor features standard 1/4"-20 thread sockets for versatile mounting. There are two mounting points: one on the bottom and one on the right side.
- Camera-top Mounting: Use the bottom 1/4"-20 thread socket to securely attach the monitor to the top of your camera, functioning as an external viewfinder.
- Accessory Mounting: The 1/4"-20 thread socket on the right side can be used with a magic arm, bracket, or other rigging equipment to mount the monitor for team monitoring.
- Tilt Arm: Each LUT6 monitor includes a cold shoe mounted Tilt Arm for flexible positioning while maintaining a low profile.


3.2 Power Supply
The LUT6 monitor offers flexible power options:
- DC Input: Connect a DC 7-24V power adapter to the DC IN 12V port.
- Battery Plate: A battery slot on the rear side supports standard Sony L series batteries (e.g., F970, F960, F770, F570 series). For optimal performance with the 2600nit bright screen, an F970 battery (7.4V 6600mAh) is recommended, providing approximately 3 hours of operation.

3.3 Connecting to Camera/Devices
The LUT6 monitor supports 4K HDMI input and output.
- HDMI Input: Connect your consumer camera or DSLR camera to the HDMI IN port using the provided Micro HDMI cable.
- HDMI Output: Use the HDMI OUT port to loop through video to external screens or projectors.
- Audio Monitoring: A 3.5mm stereo headphone jack is available for audio monitoring.
- Powering Camera: The monitor provides auxiliary DC OUT 8.4V power, allowing you to power your DSLR or mirrorless camera using an optional battery adapter cable. This extends camera run-time.



4. Operating Instructions
4.1 Basic Controls
The LUT6 monitor features both a touch screen interface and physical buttons for control.
- Touch Screen: Tap the screen to access menu settings and features.
- Wheel Button: Tap or rotate the wheel button for quick selection and function adjustments.
- Power Switch: Tap the power switch to turn off the touch function, preventing accidental changes during operation.

4.2 Display Features
- Ultra Bright Display: The 2600nits screen is visible in direct sunlight, eliminating the need for a sun hood in most outdoor conditions.
- Full HD Resolution: Enjoy clear and precise monitoring with a 1920x1080 resolution and 368 PPI.
- HDR/De-log 3DLUT: Built-in HDR and Rec.709 De-slog3 LUTs (including SLOG2, SLOG3, LOGC, VLOG) simplify post-production workflows by displaying HDR signals with incredible clarity.
- Custom 3D LUTs: Load up to 50 custom .cube files (max 7.9MB per file, supporting LUT_3D_SIZE of 16, 17, 32, 33, 64, 65) via the SD card slot (FAT32 and NTFS supported) to preview film looks in real-time.
- Professional Color Calibration: FEELWORLD uses professional Rec.709 HD color standard and factory calibration to ensure accurate color reproduction.



4.3 Advanced Monitoring Tools
The LUT6's flexible OS includes a comprehensive suite of scopes and tools for precise image analysis:
- Waveform: Assists with professional video camera calibration by showing the overall brightness of the image (RGB Parade, YUV Parade, Y Parade).

- Vectorscope: Displays image saturation and color spectrum, allowing real-time monitoring of color gamut range.

- RGB Histogram: A graphical display of tone distribution across Red, Green, and Blue channels, suitable for HD-SDI and HDMI signal monitoring.

- Anamorphic Mode: Built-in de-squeeze options (no squeeze, 1.25x, 1.33x, 1.5x, 2.0x, 2.0x mag) allow you to view unsqueezed images from anamorphic lenses.

- Ratio Marker: Offers various ratio markers (16:9, 16:10, 4:3, 1.85:1, 2.35:1) with adjustable transparency (0%, 25%, 50%, 75%) and customizable colors (yellow, red, green, blue, white, black).

- Other tools include Focus Peaking, Zoom, Zebra, False Color, Frame Guides, Safe Area, and Audio Meter.

5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor screen and body. For stubborn smudges, use a screen-specific cleaning solution applied to the cloth, not directly to the screen.
- Storage: Store the monitor in a cool, dry place away from direct sunlight and extreme temperatures. Use a protective case when transporting.
- Fan Operation: The monitor has an automatic heat dissipation fan. In 'auto' mode, if the backlight brightness exceeds 80, the fan will automatically activate to prevent overheating. Ensure the fan vents are not obstructed.
- Battery Care: When not in use for extended periods, remove the battery. Charge batteries regularly to maintain their lifespan.
6. Troubleshooting
- Monitor Not Turning On:
- Check power source: Ensure the DC adapter is properly connected or the battery is charged and correctly inserted.
- Verify battery compatibility: Use recommended Sony L series batteries.
- No Signal Displayed:
- Check HDMI cable connections: Ensure both ends of the HDMI cable are securely connected to the camera/source and the monitor.
- Verify camera output settings: Confirm your camera is set to output video via HDMI and that the resolution/frame rate is supported by the monitor (refer to Specifications).
- Test with another HDMI cable or source if possible.
- Touch Screen Unresponsive:
- Check if the touch function is disabled via the power switch. Tap the power switch to re-enable it.
- Restart the monitor.
- Image Appears Washed Out/Incorrect Colors:
- Check if a 3D LUT is incorrectly applied or if the wrong LUT is selected.
- Ensure HDR mode is correctly configured if viewing HDR content.
- Verify camera color settings.
- Overheating:
- Ensure the fan vents on the back of the monitor are clear of obstructions.
- Reduce backlight brightness if operating in extreme heat.
7. Specifications
| Feature | Specification |
|---|---|
| Display Size | 6 inches |
| Screen Type | LCD IPS Screen |
| Resolution | 1920x1080 pixels |
| Pixel Pitch | 0.069 (L) x 0.069 (W) (mm) |
| Brightness | 2600cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Aspect Ratio | 16:9 |
| Backlight | LED |
| Input | HDMI |
| Output | HDMI, DC output |
| Audio | 3.5mm Stereo Headphone |
| Input Voltage | DC 7 - 24V |
| Power Consumption | ≤16W |
| Install Way | 1/4"-20 Thread Socket (Right, Bottom) |
| Battery Plate | F970 Battery Plate |
| Unit Size | 162Lx93.2Hx29D(mm) |
| Unit Weight | 300g |
| Certification | CE, FCC, RoHS |
| Supporting Language | Japanese, French, German, Italian, Spanish, Russian, English, Korean, Simplified Chinese |
7.1 4K HDMI Support Formats
- 480i/480p/576i/576p
- 720p(60/59.94/50/30/29.97/25/24/23.98)
- 1080i(60/59.94/50)
- 1080p(60/59.94/50/30/29.97/25/24/23.98)
- 3840x2160p (30/29.97/25/24/23.98)
- 4096x2160p (24Hz)

8. Warranty and Support
The product warranty for FEELWORLD monitors is one year from the date of purchase.
8.1 Warranty Policy
- Quality Problems: If a quality issue arises, the buyer must provide photos, videos, or other evidence for evaluation and identification.
- Man-made Damage: The buyer is responsible for any man-made damage.
- Processing Program: If a product quality issue is confirmed, the buyer returns the goods (responsible for return shipping costs). Upon receipt, a new product will be sent to the buyer, with the seller covering the resend shipping cost.
8.2 Technical Support
For technical assistance or further inquiries, please refer to the official FEELWORLD website or contact their customer support channels. Keep your purchase receipt for warranty claims.
9. User Tips
- Outdoor Shooting: Leverage the 2600nits ultra-bright screen for clear visibility even in direct sunlight, often eliminating the need for a sun hood.
- Pre-visualization: Utilize the 3D LUT feature to load custom film looks and accurately preview your final image during shooting, saving time in post-production.
- Extended Camera Power: Take advantage of the DC output to power your camera directly from the monitor, extending your camera's battery life during long shoots.
- Precise Exposure: Use the built-in waveform and histogram tools to achieve accurate exposure, especially in challenging lighting conditions.
- Color Accuracy: Rely on the vectorscope to monitor and ensure your colors are within the desired gamut, crucial for professional video work.