1. Introduction
The Fosi Audio BT20A is a Hi-Fi wireless stereo 2-channel amplifier designed for home audio enthusiasts. It features a powerful 100W x 2 output and Bluetooth 5.0 for seamless audio streaming up to 50ft (15m). This mini power amplifier is equipped with bass and treble controls, offering a simple, compact, yet powerful solution for those who pursue high-fidelity sound.
Video: Fosi Audio BT20A Product Overview and Demonstration.
2. Package Contents
Please check the package for the following items:
- Fosi Audio BT20A Amplifier x1
- AC Power Cord x1
- 24V Power Supply x1
- Bluetooth Antenna x1
- Instruction Manual x1
Note: Some configurations may not include a power adapter. Please verify your order details to confirm if a power adapter is included.

Image: What's in the Box? Diagram of included items.

Image: Important note regarding power supply inclusion.
3. Product Overview & Control Functions
Front Panel
- Power Switch
- Treble Control
- Bass Control
- Volume Control
- Power Indicator Light (Red: AUX, Blue: BT)
Back Panel
- RCA Input
- Speakers Output
- DC 12-24V Input
- Bluetooth Antenna Connector

Image: Front and Rear Panel Overview with labeled controls and ports.
4. Specifications
| Feature | Specification |
|---|---|
| Audio Input | Bluetooth / RCA |
| Bluetooth Version | Bluetooth 5.0 |
| SNR (Signal-to-Noise Ratio) | ≥ 98dB |
| Input Sensitivity | ≤ 280mV |
| THD (Total Harmonic Distortion) | ≤ 0.5% |
| Max Output Power | 100W + 100W (4 ohm/24V Load) |
| Power Supply | 24V 4.5A (Recommended) |
| DC Input Range | 12-24V |
| Terminating Impedance | 2Ω - 8Ω |
| Bluetooth Transmission Distance | Up to 50 Ft (15m) without obstruction |
| Frequency Range | 20Hz - 20kHz (±1 dB) |
| Input Mode | Bluetooth and Analog |
| Product Size | 130 x 100 x 35 mm (5.20 x 3.54 x 1.42 inches) |
| Product Weight | 700g |
| Material | Metal |
| Control Method | Push button |
| Certifications | CE, FCC ID: 2A4LX-FOSMP |

Image: Two Texas Instruments TPA3116D2 Chips for clear audio.
5. Quick Setup
Preparation
- Gather your Fosi Audio BT20A amplifier, 24V power supply (if included), passive speakers, and speaker wires or banana plugs.
- Ensure the volume/power switch on the front panel is in the OFF position before connecting the power supply.
Connecting Speakers (Bare Wire)
- Release the horn terminals block terminals on the amplifier.
- Insert the two ends of the speaker wire into the amplifier and speaker terminal holes.
- Tighten the horn terminals.
Note: Please avoid the speaker wires being exposed and touching the amplifier casing, as this may cause a short circuit fault.
Connecting Speakers (Banana Plugs)
- Release the banana jacket.
- Loosen the screw.
- Insert the speaker wire and tighten the screw.
- Tighten the banana jacket.
- Insert the banana plug into the horn terminals of the speaker and amplifier.
Note: Please take care to avoid contact between the two banana plugs and causing a short circuit fault, as some banana plugs are metal cased.

Image: Banana plugs connection illustration.
Bluetooth Connection
- Install the Bluetooth antenna to the BT20A.
- Toggle the power switch on the front panel upwards to turn on the BT20A amplifier.
- Turn on Bluetooth on your device (e.g., phone) and search for "Fosi Audio" or "Fosi Audio BT20A".
- After connecting, the indicator light on the amplifier will show a blue light.
- Open your audio application, play music, and enjoy!

Image: Bluetooth connection example with a smartphone.
RCA Input Connection
- Connect your audio source (e.g., phone, CD player) to the BT20A via an RCA cable or a 3.5mm AUX to RCA cable (some devices may require this).
- After connecting, the indicator light on the amplifier will show a red light.
- Open your audio application, play music, and enjoy!
Note: Keep the BT20A away from other electrical devices. The BT20A cannot be used with a radio simultaneously.

Image: Product Connection and Usage Diagram.
6. Operating Instructions
Power On/Off
Use the toggle switch on the front panel to turn the amplifier On or Off.
Input Selection
The BT20A automatically prioritizes Bluetooth input over RCA input. If Bluetooth is connected, playback from the RCA input will be interrupted. To use RCA input while Bluetooth is paired, you need to disconnect or turn off Bluetooth on your source device first.
Adjusting Sound
Use the Treble and Bass control knobs on the front panel to fine-tune your audio experience. The Volume control knob adjusts the overall output level.

Image: Adjusting Bass and Treble Controls.
7. User Tips
- For optimal sound quality, ensure all cables are fully and securely connected to prevent cracking or noise.
- Experiment with the treble and bass controls to find the perfect tone for your speakers and listening preferences.
- When using Bluetooth, keep your source device relatively close to the amplifier and minimize obstacles to maintain a stable connection.
- If connecting a turntable, remember that the BT20A does not have a built-in phono preamp. An external phono preamp is required for turntables without one.
- For Windows 10 users experiencing Bluetooth audio issues, try updating or changing your Bluetooth driver (e.g., to a Realtek Bluetooth A2DP device driver).
- The amplifier can be left on continuously as it consumes very low power in standby mode.
8. Troubleshooting / FAQ
Q1: What type of speakers work best with the BT20A Amplifier?
A1: The Fosi Audio BT20A works great with any 2-8Ω passive speakers. Please note that the BT20A amplifier is designed for passive speakers, not for powered speakers or subwoofers.
Q2: Why is Bluetooth intermittent?
A2: Try the following:
- Use another Bluetooth device to test.
- Ensure there is no interference from other electronic equipment between the BT20A and the audio source.
- Place your device closer to the BT20A.
- Replug the power adapter.
Q3: Why does the BT20A make serious noise when used together with a radio?
A3: A common feature of Class D power amplifiers is that they can cause serious noise when used with a radio. We do not recommend using the BT20A with a radio or too close to it.
Q4: Can I connect a turntable to the BT20A amp? Why is the volume extremely low?
A4: For turntables without a built-in preamp, you need to add an external phono preamp before connecting to the BT20A. For turntables with a built-in preamp, ensure the preamp is switched on before connecting.
Q5: Why does my power indicator not light up?
A5: Try the following:
- Check that the AC power cord is securely connected to the power supply and to an AC power outlet.
- Check that the AC power outlet is supplying power; the power LED on the power supply should be on.
- Replace another power supply and try again. 12-24V DC power supplies are suitable.
- If you confirm the power supply is defective, please contact support for exchange.
Q6: Why is the sound cracking or making a lot of electric noise?
A6: Try the following:
- Ensure all cables are completely pushed into the devices; incomplete connections can cause cracking.
- Remove all inputs and check if the cracking noise disappears. The cracking may originate from the audio source or input cables.
- If you are not using the original factory standard power supply, replace it before testing. Many aftermarket power supplies have a large interference coefficient, which can cause current noise.
Q7: Can I use headphones with this product?
A7: No, the BT20A cannot be connected to headphones and only supports passive speakers.
Q8: How can I switch between Bluetooth input and RCA input?
A8: You can connect this amp via Bluetooth as well as wired input. However, if Bluetooth is connected, playback from the RCA input is interrupted. You need to turn off Bluetooth on your device if you want to use RCA input. Input priority: Bluetooth input > RCA input.
Q9: Why is there no voice from my amplifier?
A9: Try the following:
- Check whether the power supply cable is connected to the BT20A and if the power indicator is on.
- Make sure the BT20A's indicator light is on when the power is turned on.
- Check that the BT20A and your source components are turned on and not set to minimum volume. If possible, replace your source and test again.
- Check that the wire connections from the audio source to each speaker in the amplifier are connected correctly.
- Check that the cable is not loose or damaged. Incomplete connection is one of the main reasons for no sound.
- Please make sure Bluetooth is paired. If Bluetooth is connected, the playback of RCA input will be interrupted. To connect with an RCA cable, you need to interrupt the Bluetooth connection first.
Q10: My Bluetooth device cannot pair with BT20A?
A10: Try the following:
- Make sure that BT20A is powered on.
- Make sure that BT20A is not paired with other devices.
- Ensure the distance between your device and BT20A is not too long. Try moving your device closer.
- Make sure there are no obstacles between your device and BT20A, as obstacles will affect the Bluetooth operation distance.
- Try changing to another Bluetooth audio source to test.
- Reconnect the power supply to the BT20A, and try moving the BT20A to another room.
- Restart the BT20A and then try to connect again, or try using another Bluetooth device.
Q11: How much power does this use in standby mode? Can this amp be left on all the time?
A11: This is a Class D amplifier, so it will consume very low power in standby mode. It can be connected all the time and is safe without significant power consumption.
Q12: Sound quality is not good?
A12: Try the following:
- Make sure all the cables are fully connected.
- Adjust the treble and bass controls of the power amplifier to achieve the right tone.
- Try changing the sound source and cables to test.
Q13: Should I unplug the power cord?
A13: If the item will not be used for a long time, please unplug the power plug to prevent damage from lightning strikes.
Q14: Can I bridge channel 1 and channel 2 to get 200 watts?
A14: No, this amplifier cannot be bridged.
Q15: How can I connect BT20A to TV?
A15: Because the BT20A has an RCA input, it can be connected to a TV using an RCA cable or a 3.5mm AUX to RCA cable if your TV has a headphone output.
Q16: Can BT20A accept a signal from a Bluetooth microphone?
A16: If your Bluetooth microphone is a Bluetooth transmitter, then yes. This amplifier is a Bluetooth receiver amplifier.
Q17: Why does the sound cut in and cut out?
A17: Try the following:
- Try to reduce the volume of the sound source.
- Try to change the audio source to test.
- Reduce the volume of the treble and bass knob on the BT20A.
- Ensure that the positive and negative poles of the speaker output do not touch each other. Some relatively large banana plugs are easy to touch together and cause a short circuit.
Q18: What is the difference between BT20A and BT10A?
A18: The Fosi Audio BT20A has 100 Watts*2 MAX power output, while the Fosi Audio BT10A has 50 Watts*2 MAX power output.
Q19: Can I take the BT20A to other countries?
A19: Yes, the wide voltage AC 110-240V for power input can be used in any country. You only need to match the power cord adapter of the corresponding country.
9. Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- If the amplifier will not be used for an extended period, unplug the power cord from the wall outlet to protect it from potential electrical surges or lightning strikes.
10. Warranty & Support
All Fosi Audio products come with an 18-month limited warranty covering parts and labor from the date of purchase. If you encounter any problems or have questions, please contact us:
- Email: support@fosiaudio.com
- Alternative Email: fosiaudio@hotmail.com
For more information about Fosi Audio products, visit our website: www.fosiaudio.com
11. Product Comparison
Here is a comparison of the BT20A with other Fosi Audio amplifier models:
| Feature | BT20A | BT10A | BT30A | BT30D | T20 |
|---|---|---|---|---|---|
| Type | 2.0 CH Amp | 2.0 CH Amp | 2.1 CH Amp | 2.1 CH Amp | 2.0 CH Amp |
| Bluetooth Version | Bluetooth 5.0 | Bluetooth 5.0 | Bluetooth 5.0 | Bluetooth 5.0 | Bluetooth 5.0 |
| Input | Bluetooth + RCA | Bluetooth + 3.5mm AUX | Bluetooth + RCA | Bluetooth + RCA | Bluetooth + RCA |
| Output | Passive Speakers | Passive Speakers | Passive (Speakers + Subwoofer) | Passive (Speakers + Subwoofer) + Powered Subwoofer | Passive Speakers + Headphone |
| Power Adapter | 24V/4.5A | 19V/4.74A | 24V/4.5A | 24V/4.5A | 24V/4.5A |
| MAX Power Output | 100 watt x 2 | 50 watt x 2 | 50 watt x 2 + 100 watt | 50 watt x 2 + 100 watt | 50 watt x 2 |