1. Product Overview
The Wellye RX22 is a 2.4G Bluetooth receiver designed for use with children's electric ride-on vehicles. It works in conjunction with a compatible remote controller to allow parental or guardian control over the vehicle's movement. This manual provides essential information for the safe and effective use of your Wellye RX22 receiver and remote control system.
Image: Wellye RX22 12V receiver and a compatible white remote control.
2. Safety Information
Please read and understand all safety warnings before using this product. Failure to follow these instructions may result in injury or damage to the product.
- This product is intended for use with children's electric ride-on vehicles only.
- Ensure the receiver is correctly installed and secured within the vehicle.
- Always supervise children when they are operating the electric vehicle.
- Do not expose the receiver or remote control to water or extreme temperatures.
- Use only the specified battery type (AAA 1.5V) for the remote control and ensure correct polarity.
- WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3. Setup and Frequency Matching
Before first use, or after replacing the batteries in the remote control, you must match the remote's frequency with the vehicle's receiver.
-
Install Remote Control Batteries
Open the battery compartment of the remote control. Install two AAA 1.5V batteries, ensuring correct positive (+) and negative (-) polarity. Close the battery cover. The indicator light on the remote will flash three times, confirming correct battery installation.
Image: Example of a white remote control for the Wellye RX22 system.
-
Initiate Pairing on Remote
Press and hold the frequency key (often labeled "car select" or similar, typically a central button) on the remote control for approximately 2 seconds. The indicator light on the remote will begin to flash.
Image: Example of a red remote control for the Wellye RX22 system, showing button layout.
-
Power On Vehicle
While the remote's indicator light is flashing, turn on the power button of the electric ride-on vehicle. The remote control's indicator light should turn off, indicating successful frequency matching.
-
Troubleshooting Pairing
If the matching frequency is unsuccessful (the remote's indicator light does not turn off), turn off the power supply to the vehicle and repeat steps 2 and 3.
4. Operating Instructions
Once the remote control is successfully paired with the vehicle's receiver, you can control the electric ride-on car.
- Forward/Backward: Use the directional buttons (usually up/down arrows) to move the vehicle forward or backward.
- Left/Right: Use the directional buttons (usually left/right arrows) to steer the vehicle.
- Speed Selection: Some remote controls may have buttons to adjust the speed settings (e.g., slow, medium, fast).
- Emergency Stop: Look for a dedicated "P" or "Stop" button on the remote for immediate halting of the vehicle in emergencies.
Always ensure a clear line of sight to the vehicle and operate within a safe range to maintain control.
5. Maintenance
- Cleaning: Wipe the receiver and remote control with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Replacement: Replace remote control batteries when the indicator light becomes dim or the remote's range decreases. Always use fresh AAA 1.5V batteries.
- Storage: Store the receiver and remote control in a dry place away from direct sunlight and extreme temperatures when not in use.
- Inspection: Periodically check the wiring connections to the receiver for any signs of wear or damage.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | RX22 |
| Item Type | Receiver and Remote Control for Electric Ride-On Vehicles |
| Material | Plastic |
| Features | Ride On Control |
| Connectivity | 2.4G Bluetooth |
| Receiver Voltage | 12V |
| Remote Battery Type | 2 x AAA 1.5V (not included) |
| Recommended Age | 12+ years (Note: This is a component for children's vehicles; actual vehicle age rating may vary.) |
| Origin | Mainland China (Guangdong) |
Image: Detailed view of the Wellye RX22 receiver module.
7. User Tips
- Ensure the remote control has fresh batteries for optimal range and responsiveness.
- Always perform a quick function check of the remote and vehicle before each use.
- Keep the remote control away from other 2.4Ghz devices to avoid potential interference during pairing or operation.
8. Warranty and Support
For warranty information, technical support, or replacement parts, please contact the original seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
