1. Product Overview
This manual provides instructions for the Batmax A2 7.2V 3660mAh Lithium-ion rechargeable battery and its compatible dual USB charger, designed for use with Arlo GO cameras.
2. Setup and Initial Use
- Initial Charge: Completely charge the battery before first usage.
- Charging Cycles: For the first 3 charging cycles, discharge the battery to 5-7% and then fully charge it again.
- Compatible Charger: Only charge the battery with the provided compatible dual USB charger.
- Insert Battery: Insert the battery into the charger slots, ensuring correct polarity. The charger has two channels (CH1, CH2) and corresponding indicator lights.
- Connect Power: Connect the charger to a power source using the provided USB cable. The charger supports various USB power sources.
3. Operating Instructions
- Only use the Batmax A2 battery with compatible devices, such as the Arlo GO camera.
- Do not charge the battery unattended or entrust it to children.
- The charger features multi-protection for safe and reliable operation, including over-charge, over-current, short circuit, and over-voltage protection.
4. Maintenance and Storage
4.1 General Maintenance
- If storing the battery or not using it for longer periods, please remove it from the device.
- For optimal lifespan, store the battery with approximately 60% of its nominal capacity.
- A battery discharges over time. Deep discharge can irreversibly damage the battery. Periodically check the battery charge.
- Use the battery as your main power source and keep a fully charged original as a reserve if possible.
4.2 Safety Information
- Opening or disassembly of the product should only be performed by trained service personnel.
- Fire Hazard: Pay attention to maximum output currents. If you observe deformation, discoloration, or fluid leakage, disconnect the device immediately. If possible, transport it outdoors for ventilation. Leaking fluids can ignite.
- Short Circuit Risk: Do not bridge any contacts.
- Avoid contact with liquids, fire, dust, and temperatures above 60°C.
- Fluid Contact: If battery fluids come into contact with skin, rinse immediately with clear water. If contact with eyes occurs, rinse thoroughly and consult a doctor immediately. There is a risk of injury or blindness.
- Use equipment only in dry areas. Do not operate unattended or entrust to children.
4.3 Disposal
Rechargeable batteries are hazardous waste and must not be disposed of with household waste. Dispose of the product at the end of its service life in accordance with applicable statutory provisions.
5. Troubleshooting
- If the device shows any signs of deformation, discoloration, or fluid leakage, immediately disconnect it from power and discontinue use.
- Ensure the battery is correctly inserted into the charger and the charger is connected to a functional power source if charging issues occur.
- If the battery is not holding a charge, ensure it has been cycled properly (discharged to 5-7% and fully recharged) for the first three uses.
For issues not covered here, please refer to the warranty and support section.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Batmax |
| Battery Model | A2 |
| Battery Type | Rechargeable Li-ion Battery (Standard Battery) |
| Capacity | 3660mAh |
| Voltage | 7.2V |
| Use For | Arlo GO |
| Package | Yes |
| Origin | Mainland China |
| Package Weight | 0.2 kg |
| Package Dimensions | 20cm x 15cm x 5cm |
7. Warranty and Support
- The product comes with a 12-month warranty.
- The manufacturer is not liable for damage to persons or property caused by improper installation, maintenance, usage, or operation.
- The warranty covers the product itself. The manufacturer has no influence on the installation of the product.
- Do not change or modify the product or its accessories. Unauthorized modifications will void the warranty.
- Areas of application not described in this manual are not permitted and will result in the loss of warranty and liability.
For further details, you may refer to the official user manual PDF: View User Manual (PDF)
Manufacturer Address: Shenzhen Jindige Digital Technology Co.,Ltd #101-6,Bldg4, Xinxia Avenue No.23, Lichang Community, PingHu, LongGan District, Shenzhen, China.518111
8. User Tips
- This battery is specifically designed for Arlo GO cameras, ensuring full compatibility.
- The battery is rechargeable, offering a cost-effective and environmentally friendly power solution.
- The package includes the battery, so you have everything needed to power your device.