ANNKE N48PBB

Contents

ANNKE 8CH 6MP POE Video Recorder H.265+ NVR Instruction Manual

Model: N48PBB

1. Product Overview

The ANNKE 8CH 6MP POE Video Recorder (NVR) is a robust solution for home surveillance, supporting up to 8 IP cameras with built-in Power over Ethernet (PoE) inputs. It features advanced H.265+ video compression for efficient storage and high-definition real-time viewing and recording.

Key Features:

  • Up to 6MP Super HD Streaming
  • Advanced H.265+ Video Compression
  • 100% Plug & Play PoE for easy installation
  • Smart Playback for efficient video review
  • Remote Access via Annke Vision App
  • App Pushes & Email Alerts for motion events
  • Secure Encryptions & Protocols
  • HDMI/VGA Outputs up to 1080P
  • 24/7 Continuous Recording
ANNKE NVR front and rear view with ports and feature icons

Figure 1: ANNKE NVR front and rear view with ports and feature icons.

What's in the Box:

  • 1X NVR (Model N48PBB)
  • 1X USB Mouse
  • 1X Power Adapter
  • 1X 1 m Network Cable
  • 1X 1.8 m HDMI Cable
  • 1X User Manual (PDF available for download)
Contents of the ANNKE NVR kit including NVR, power adapter, mouse, HDMI cable, network cable, and user manual

Figure 2: Contents of the ANNKE NVR kit.

2. Setup Guide

2.1. Hardware Installation

Follow these steps to install the hard disk drive (HDD) and connect your NVR system.

  1. Install the Hard Disk Drive (HDD):
    • Unscrew and remove the top cover of the NVR casing.
    • Connect the SATA power and data cables from the NVR motherboard to the HDD.
    • Carefully place the HDD inside the NVR chassis and secure it with the provided screws from the bottom.
    • Replace the NVR casing and secure it with screws.
  2. Connect the NVR:
    • Connect your PoE IP cameras to the NVR's PoE ports using Ethernet cables. The PoE ports provide both power and data.
    • Connect the NVR to a monitor or TV using an HDMI or VGA cable.
    • Plug the USB mouse into one of the NVR's USB ports.
    • Connect the NVR to a power outlet using the provided power adapter.
    • Connect the NVR's LAN port to your router using an Ethernet cable for network access.
Diagram showing NVR dimensions and connection points for power adapter, mouse, Ethernet port, and video input

Figure 3: NVR dimensions and connection diagram.

2.2. Initial Configuration and App Connection

To access your NVR remotely and manage settings, you'll need to connect it to the network and set up the Annke Vision app.

  1. Ensure your NVR is powered on and connected to a monitor and your local network via an Ethernet cable.
  2. On the monitor connected to the NVR, right-click to access the menu.
  3. Navigate to 'Configuration' then 'Network' and select 'Platform Access'.
  4. Verify that 'Enable Annke Vision' is checked and the 'Status' shows 'Online'. If not, check your network connection and DNS settings.
  5. Download the Annke Vision app on your smartphone. Scan the QR code displayed on the NVR screen for Android or iPhone to download the app.
  6. Open the Annke Vision app, select 'Add Device', and scan the NVR's Serial Number (SN) QR code (also displayed on the NVR screen).
  7. Follow the on-screen prompts in the app to complete the device addition. You can customize the device name.
  8. Once added, you can view live footage from your cameras directly on your mobile device.

Video 1: Guide to setting up the ANNKE NVR kit and connecting it to the Annke Vision app for remote access.

3. Operating Instructions

3.1. Live View and Playback

  • Live View: Access the Annke Vision app or the NVR's connected monitor to view real-time footage from your cameras. You can select individual cameras or a multi-channel view.
  • Smart Playback: The NVR supports smart playback, allowing you to quickly locate motion-triggered events without reviewing hours of uneventful footage. This feature helps in efficient incident review.
Screenshot of smart playback interface showing how motion events are highlighted for quick review

Figure 4: Smart Playback feature for efficient event review.

3.2. Motion Detection and Alerts

Configure motion detection zones and sensitivity to receive instant alerts.

  • Configuration: Through the NVR's menu or the Annke Vision app, define specific areas within the camera's view for motion detection. Adjust sensitivity to minimize false alarms.
  • Alerts: Upon detection of motion, the system can send instant push notifications to your Annke Vision app and email alerts to your registered email address.
Smartphone screen showing app notifications and email alerts for motion events from the security system

Figure 5: App pushes and email alerts for motion events.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your ANNKE NVR system.

  • Physical Inspection: Periodically check all cable connections (Ethernet, HDMI, power) to ensure they are secure and free from damage.
  • Environmental Conditions: Ensure the NVR is placed in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. Avoid blocking ventilation holes.
  • Software Updates: Regularly check for and install firmware updates for your NVR and the Annke Vision app to benefit from new features, security enhancements, and bug fixes.
  • Data Backup: For critical recordings, consider regularly backing up data from the NVR's HDD to an external storage device.
  • Cleaning: Gently clean the NVR's exterior and camera lenses with a soft, dry cloth. Avoid using harsh chemicals.

5. Troubleshooting

Here are some common issues and their solutions:

ProblemPossible CauseSolution
No video on monitorLoose HDMI/VGA cable, monitor input not selected correctly, NVR not powered on.Check all video cable connections. Ensure the monitor is set to the correct input source (HDMI/VGA). Verify NVR power.
Cameras not showing up/offlineLoose Ethernet cable, camera not powered, network issue.Check Ethernet cable connections to PoE ports. Ensure NVR is powered. Verify NVR network settings and 'Platform Access' status is 'Online'.
No remote access via appNVR not connected to internet, 'Platform Access' disabled, incorrect app configuration.Ensure NVR is connected to your router. Check 'Platform Access' status on NVR monitor. Re-add device in app if necessary.
No recordingHDD not installed/detected, HDD full, recording schedule not set.Verify HDD installation and connection. Check HDD status in NVR settings. Configure recording schedule.
No motion alertsMotion detection not enabled, incorrect alert settings, app notifications disabled.Enable motion detection for relevant cameras. Configure email and app push settings. Check phone notification settings for Annke Vision app.

6. Specifications

FeatureSpecification
Model NumberN48PBB
Video CompressionH.265+/H.265/H.264+/H.264
IP Video Input8CH POE
Video Output HDMI & VGAUp to 1080P
Incoming Bandwidth60M
Max Recording ResolutionUp to 6MP
Max Playback ResolutionUp to 6MP
Max Playback Channel8CH
Max Playback Capacity4-ch@1080P, 1-ch@6MP@25fps
HDD Interface1 SATA interface
HDD CapacityUp to 6TB capacity
Network InterfaceRJ45x1(10/100M)
POE Ports8 Ports (IEEE802.3af/at)
USB Ports2x USB 2.0
Operating PowerDC48V
Power Consumption≤10W (without HDD and POE)
POE Max Power (single port)25.5W
Working Temperature14 °F ~ 131 °F /-10 °C ~+55 °C
Dimensions (W x H x D)10.4" × 8.9" × 1.9" / 265 × 225 × 48mm
Weight (without hard disk)2.2lbs / 1KG
Supported Operating SystemsMicrosoft Windows 7
Supported Mobile SystemsiPhone OS, Android
Wireless SecurityWPA
CertificationCE, FCC
Alarm TypeLocal Alarm
Smart Home PlatformOther

7. Warranty and Support

ANNKE provides comprehensive support for its products.

  • Warranty: The NVR comes with a 2-year warranty.
  • Technical Support: Lifetime phone and email support are available for all ANNKE products.
  • User Manual (PDF): A detailed user manual in PDF format is available for download. This document contains additional information regarding advanced features, detailed setup, and troubleshooting. You can access it via the provided link: ANNKE NVR User Manual (PDF).

8. User Tips

Based on common user inquiries and experiences, here are some helpful tips:

  • Camera Compatibility: The ANNKE NVR is designed for optimal compatibility with ANNKE cameras. While some users report success with other ONVIF-compliant cameras, full functionality and compatibility with brands like Sannce or Hikvision cannot be guaranteed and may require specific configurations or may not work as expected.
  • PoE Splitters: It is generally not recommended to use a PoE splitter to connect multiple cameras to a single NVR PoE port. This can lead to insufficient power delivery, network instability, or the NVR failing to recognize all connected cameras. For best performance, connect each camera directly to its own dedicated PoE port on the NVR.
  • Network Connection: Always ensure a stable and strong network connection for your NVR to guarantee reliable remote access and timely alerts.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.