yuyi 1J0972926

Contents

14-Pin Auto Waterproof Connector Instruction Manual

Model: 1J0972926 (Compatible with A0275459826, A0555452928, A0525455626, 2294952-2, 052 545 56 26, 13527901)

Brand: yuyi

1. Introduction

This manual provides essential information for the safe and effective use of your 14-Pin Auto Waterproof Connector. Designed for automotive and lighting applications, this connector ensures a secure and waterproof electrical connection. Please read all instructions carefully before installation and use.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Non-professionals should not attempt installation or use.
  • Do not use this product for purposes other than its intended use (automotive and lighting electrical connections).
  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its intended waterproof rating during installation or if not properly sealed.

3. Package Contents

Each auto connector package typically includes:

  • 1x Connector Housing (Female or Male, as selected)
  • Appropriate number of Pins (Terminals)
  • Appropriate number of Seals
14-Pin Auto Waterproof Connector Kit with Terminals and Seals
Figure 1: 14-Pin Auto Waterproof Connector Kit with Terminals and Seals
Grey 14-Pin Connector with Individual Terminals and Seals
Figure 2: Grey 14-Pin Connector with Individual Terminals and Seals

4. Installation and Setup

The installation of these connectors requires precision and appropriate tools to ensure a reliable and waterproof connection.

4.1 Tools Required

  • Professional crimping pliers suitable for 1.0/2.8mm series terminals.
  • Wire strippers.
  • Wire cutters.

4.2 Installation Steps

  1. Prepare Wires: Carefully strip the insulation from the ends of the wires to be connected, ensuring the exposed wire length matches the terminal's crimp area.
  2. Attach Seals: Slide the appropriate rubber seals onto each wire before crimping the terminals. These seals are crucial for the waterproof integrity of the connector.
  3. Crimp Terminals: Using professional crimping pliers, securely crimp the terminals onto the stripped wire ends. Ensure a strong mechanical and electrical connection.
  4. Insert Terminals into Housing: Carefully insert the crimped terminals into the correct cavities of the connector housing. Listen for a click, indicating the terminal is locked in place. Ensure the seals are properly seated within the housing.
  5. Assemble Connector: If applicable, connect the male and female connector halves, ensuring they snap together securely. Verify that all pins are aligned and fully engaged.
14-Pin Connector Installed in a Vehicle Harness
Figure 3: Example of a 14-Pin Connector Installed in a Vehicle Harness

5. Operation

Once installed, the connector provides a stable electrical link. No specific operational steps are required beyond ensuring a proper connection. The waterproof design protects the electrical contacts from environmental elements.

6. Care and Maintenance

  • Regular Inspection: Periodically check the connectors for any signs of damage, corrosion, or loose connections, especially in high-vibration environments.
  • Cleaning: If necessary, clean the exterior of the connectors with a dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
  • Sealing Integrity: Ensure that the foam or rubber seals remain intact and properly seated to maintain the waterproof rating. Engine vibrations can sometimes affect the adherence of these seals over time.
  • Disassembly: If disassembly is required, proceed with caution. Some connectors, particularly the female (mother) type, may be difficult to disassemble without damage and might be considered single-use. Removing plastic clips for large pins can be challenging; however, pins often hold well even if clips are slightly compromised.

7. Troubleshooting

If you experience issues with your electrical connection, consider the following:

  • No Connection/Intermittent Connection:
    • Check if terminals are fully seated and locked into the connector housing.
    • Inspect crimps for proper wire contact.
    • Verify that the male and female connector halves are fully engaged.
    • Look for bent or damaged pins.
  • Water Ingress:
    • Ensure all seals are correctly installed and not damaged.
    • Verify the connector halves are fully mated and locked.
  • Difficulty Crimping:
    • Ensure you are using professional crimping pliers appropriate for the terminal size.
    • Confirm the wire gauge is compatible with the terminals. Some terminals may be designed for specific wire diameters (e.g., up to 1.5mm), and larger wires (e.g., 2.5mm) may require different terminals or careful pressing.

8. Product Specifications

FeatureDetail
Product NameConnector
Model Number1J0972926 (Compatible with A0275459826, A0555452928, A0525455626, 2294952-2, 052 545 56 26, 13527901)
Brand Nameyuyi
OriginMainland China
CertificationNONE (CE Compliant)
MaterialNylon
Type1.0/2.8mm series plug
Position14 pin car connector
GenderFemale or male (as selected)
ApplicationAutomotive, Lighting
Wireless FunctionalityNo
Battery IncludedNo
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
High-concerned chemicalNone

9. User Tips

  • Wire Gauge Compatibility: Be aware that some terminals, especially larger ones, might be designed for wire diameters up to 1.5mm. If working with 2.5mm wires (common for 12V lines in cars), you may encounter difficulty crimping or need to trim some strands for a proper fit.
  • Connector Condition: While female connectors are often new, male connectors might sometimes be sourced from disassembly or be refurbished. Inspect all components upon receipt.
  • Disassembly Caution: These connectors are designed for a secure fit. Disassembling them, particularly the female housing, can be challenging and may result in damage. It might be more practical to replace the connector if extensive rework is needed.
  • Pin Retention: Removing the plastic clips that secure large pins can be difficult without damaging them. However, the pins are generally held well even if these clips are slightly compromised.
  • Seal Integrity for Critical Applications: For connections to critical components like engine electronic control units (ECUs) or sensors, ensure the foam or rubber seals are perfectly seated and maintained. Engine vibrations can cause seals to shift over time, potentially leading to moisture ingress and connection issues.

10. Warranty and Support

10.1 Manufacturer Information

  • Manufacturer: Yueqing ChenYi Electric Co., Ltd
  • Address: 2nd Floor, Building 3, No. 12 Yongxing 1st Road, Chengdong Industrial Functional Zone, Chengdong Street, Yueqing City, Zhejiang Province, China
  • Phone: +86-15869652718

10.2 EU Authorized Representative

  • Representative: EUREPSTAR GmbH
  • Address: Schlüterstr. 3, 85057 Ingolstadt, Germany
  • Phone: +49-84188697744
  • Email: eurep@eurep-gmbh.de

For technical support or warranty inquiries, please contact the manufacturer or the authorized representative using the details provided above.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.