ThinkRider HW702

Contents

ThinkRider HW702 Armband Heart Rate Monitor User Manual

Model: HW702

Introduction

The ThinkRider HW702 is an advanced armband heart rate monitor designed for various sports and outdoor activities. It utilizes a unique calculation method to filter noise and provide stable, accurate heart rate data. Featuring both ANT+ and BLE 4.0 communication protocols, it offers broad compatibility with a wide range of fitness devices and applications. Its IP67 waterproof rating ensures durability against splashes and sweat, making it suitable for daily use in diverse conditions.

ThinkRider HW702 Armband Heart Rate Monitor with ANT+ and BLE logos
Figure 1: ThinkRider HW702 Armband Heart Rate Monitor

Package Contents

Please check the package to ensure all items are present:

  • Heart Rate Armband (HW702)
  • Magnetic Charging Cable
  • User Manual
Diagram showing Heart Rate Armband, Magnetic Charging Cable, and User Manual
Figure 2: Standard Package Contents

Setup

1. Charging the Device

Before initial use, fully charge your HW702 heart rate monitor. The device uses a magnetic charging cable for convenience.

  • Connect the magnetic charging cable to the charging contacts on the device.
  • During charging, the LED indicator will alternately flash green and red.
  • Once fully charged, the LED indicator will turn solid green. You can then disconnect the charger.
  • Ensure to tear off any protective film from the photoelectric heart rate sensor before use.
Diagram showing magnetic charging contacts, cable, photoelectric sensor, and LED indicator
Figure 3: Charging the HW702 and Sensor Details

2. Wearing Method

For accurate heart rate monitoring, proper placement of the armband is crucial.

  • Wear the heart rate armband either above or below your elbow joint.
  • Ensure the photoelectric sensor on the back of the device is in direct contact with your skin.
  • Adjust the tightness of the armband to be snug but comfortable. It should not be too tight, as this can affect normal blood circulation and sensor accuracy.
Diagram illustrating the correct wearing method for the heart rate armband on the arm, indicating the 'Wearing Location' above the elbow.
Figure 4: Recommended Wearing Location

Operating Instructions

1. Powering On

To turn on the device and begin monitoring:

  • Press the button on the heart rate armband.
  • The blue LED light will blink quickly, indicating the device is searching for a heart rate signal.
  • Once heart rate data is successfully collected, the blue light will blink slowly.
Diagram illustrating the LED indicator for starting up the device (blue light blinking).
Figure 5: Power On Indicator

2. Powering Off

To turn off the device:

  • When you have finished your activity and the device is not actively monitoring, press the button.
  • The red LED light will blink fast, then stop blinking and the device will power off.

3. Connectivity and Compatibility

The HW702 supports dual signal transmission via ANT+ and BLE 4.0 protocols, allowing connection to a wide range of devices and applications.

  • ANT+: Compatible with ANT+ enabled bike computers (e.g., Garmin, Bryton, iGPSPORT), sports watches, and cycling software (e.g., SRM Power control, PerfPro).
  • BLE 4.0 (Bluetooth Low Energy): Compatible with selected smartwatches (e.g., Suunto, Polar), and fitness applications such as Nike+, Strava, Runkeeper, Runtastic, Endomondo, Wahoo Fitness, Wahoo Utility, EliteHRV, Powerfun, Rouvy AR, Onelap, Perfpro, ERCVideo.
Compatibility diagram showing the armband connecting to a sports watch, computer, and mobile phone, along with logos of compatible apps.
Figure 6: Device Compatibility Overview

Maintenance

1. Cleaning

The armband is designed for easy cleaning:

  • The fabric armband can be machine washed or hand washed to maintain cleanliness.
  • Wipe the sensor unit with a damp cloth. Do not submerge the sensor unit in water for cleaning, despite its waterproof rating, to prolong its lifespan.

2. Water Resistance

The HW702 heart rate monitor has an IP67 waterproof rating.

  • This means it is splashproof and protected against temporary immersion in water up to 1 meter for 30 minutes.
  • You can use it daily without concern for rain, sweat, or accidental splashes.
  • It is not recommended for swimming or prolonged submersion in water.
Image emphasizing IP67 waterproof rating with water splashes around the device.
Figure 7: IP67 Waterproof Rating

Troubleshooting

  • Device not connecting to an app or computer:
    • Ensure Bluetooth (BLE) is enabled on your mobile device or that your computer/bike computer supports ANT+.
    • Make sure the heart rate monitor is powered on (blue LED blinking slowly).
    • Ensure the photoelectric sensor is in good contact with your skin. Sometimes, moistening the skin where the sensor sits can improve contact.
  • Inaccurate heart rate readings:
    • Verify the armband is worn correctly, snugly but not too tight, and the sensor is flush against the skin.
    • Ensure the sensor area is clean and free from dirt or sweat buildup.
    • Environmental factors or excessive movement can sometimes affect optical heart rate accuracy.
  • Low Battery Indication:
    • If the red light comes on when you start to move, the device's battery level is low. Recharge it using the magnetic charging cable.

Specifications

FeatureDetail
BrandThinkRider
ModelHW702 (Armband Heart Rate Monitor)
Dimensions (L*W*H)46.78mm * 34.58mm * 11.58mm
Weight55g
Waterproof RatingIP67
Battery TypeBuilt-in Lithium Battery / 90mAh
Usage TimeUp to 20 hours
Communication ProtocolsANT+ & BLE 4.0
Wearing MethodArm
OriginMainland China
Detailed product parameter image with dimensions and specifications listed in a table format.
Figure 8: Detailed Product Parameters

User Tips

  • Optimal Sensor Contact: For the most accurate readings, ensure the photoelectric sensor on the back of the armband is always in firm, direct contact with your skin. If you experience intermittent readings, try adjusting the armband's position or tightness.
  • Pre-Activity Preparation: Before starting an activity, especially in dry conditions, lightly moistening the skin under the sensor can help establish better initial contact and improve data acquisition.
  • Battery Life Management: The HW702 offers up to 20 hours of usage time on a full charge. For extended activities or multi-day use, ensure the device is fully charged beforehand.
  • Water Exposure: While the device is IP67 waterproof and can withstand splashes and rain, it is not designed for swimming or prolonged submersion. Avoid using it during water sports where it might be continuously submerged.

Warranty and Support

For warranty information, technical support, or any product-related inquiries, please refer to the seller's official website or contact their customer service directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.