Jiayin JYPC-7A

Contents

Jiayin JYPC-7A Electromagnetic Water Pump

Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Jiayin JYPC-7A Electromagnetic Water Pump. This pump is designed for high-pressure water applications, commonly used as a replacement solenoid water pump for deep carpet cleaners and similar equipment. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Safety Information

  • Ensure the power supply matches the pump's rated voltage (AC 220V-240V, 50Hz).
  • Disconnect power before performing any installation, maintenance, or troubleshooting.
  • The pump handles high voltage (above 50Vac or 75Vdc). Exercise extreme caution.
  • Only use with water or non-corrosive liquids.
  • Do not allow the pump to run dry (without water in the tank) as this can cause damage.
  • All parts comply with ROHS standards.
  • The product is CE certified.

3. Product Overview

The Jiayin JYPC-7A is an electromagnetic pump designed for applications requiring high pressure and consistent flow. It features a compact design and is suitable for integration into various systems.

Jiayin JYPC-7A Electromagnetic Water Pump
Figure 1: Front view of the Jiayin JYPC-7A Electromagnetic Water Pump with wiring.
Side view of the JYPC-7A pump
Figure 2: Side view of the JYPC-7A pump, showing the inlet and outlet ports.

4. Specifications

The following table details the technical specifications of the JYPC-7A pump:

Parameter Value
Model Number JYPC-7A
Power Source Electric
Theory Electromagnetic Pump
Structure Other (Standard)
Rated Voltage AC 220V-240V, 50Hz
Power 60W
Max. Pressure 2 bar
Flow Rate 2400cc/min (±10% flow control range)
Noise Level 45dB
Usage Water (or non-corrosive liquid)
Working Method ID2/1min
Ambient Temperature Up to 70°C
Fluid Temperature Up to 60°C
Vacuum Within 60mbar/10S
Voltage Resistance AC1850V/0.5mA/1sec
Insulation Class H-grade
Certification CE
Net Weight 423g / 14.9oz
Material Plastic
Product dimensions and performance graphs
Figure 3: Product dimensions, flow/pressure, flow/time, and temperature rise graphs.
Detailed dimensional drawing of the JYPC-7A pump
Figure 4: Detailed dimensional drawing of the JYPC-7A pump (all dimensions in mm).

5. Package Contents

Please check the package for the following items:

  • 1x JYPC-7A Water pump
  • 1x Multi-function pliers (suitable for crimping wires in connectors)
  • 1x Female Insert spring belt wire
  • 1x Male Insert strip with wire
  • 4x Cable ties
  • 4x Hose clamps
  • 6x Male Connectors with sheaths (2x Small, 2x Medium, 2x Large)
  • 6x Female Connectors with sheaths (2x Small, 2x Medium, 2x Large)

Note: Your machine may have one male and one female connector. Please select the appropriate Female or Male connectors from the package list as needed for your specific application.

6. Setup and Installation

Follow these steps for proper installation of the JYPC-7A pump:

  1. Preparation: Before removing the old pump, pay attention to the flow direction. The new pump's connectors are typically female.
  2. Connector Selection: Choose the appropriate male/female connectors from the package before replacing. You may reuse old hose clamps or use the new ones provided.
  3. Connector Replacement (if necessary): If the connectors on your new pump are not suitable for your machine, select the correct connectors from the package. Carefully remove the existing connector from the electromagnetic pump using the provided pliers, then attach the appropriate new connector. Alternatively, you can remove the connector from the old pump and use it on the new pump.
  4. Wiring: The pump wires can be connected in any order; the pump will function regardless of which wire connects to which terminal (e.g., black and white).
  5. Hose Connection: Connect the inlet end with a silicon tube with an outer diameter of approximately 10mm, an inner diameter of 6mm, and a length of approximately 450mm. Ensure all connections are secure to prevent leaks.
  6. Final Check: Double-check all connections and ensure the pump is securely mounted.

For visual guidance, you may search for installation videos on platforms like YouTube using the part number 'JYPC-7A'.

7. Operation

Once installed, ensure the water tank or fluid reservoir is adequately filled with water or a non-corrosive liquid. The pump is designed for intermittent duty (ID2/1min), meaning it operates for a short period and then rests. Avoid continuous operation beyond its specified duty cycle to prevent overheating.

The pump is activated by applying the rated AC 220V-240V, 50Hz power. It will generate a pressure of up to 2 bar and a flow rate of 2400cc/min.

8. Maintenance

  • Regular Cleaning: Periodically check the pump and connections for any signs of rust or blockage. Ensure the fluid path remains clear.
  • Prevent Dry Running: Always monitor the water tank level. Running the pump empty can cause significant damage and shorten its lifespan.
  • Connection Integrity: Inspect hose clamps and connectors regularly for tightness and wear. Replace any worn or damaged components.
  • Storage: If storing the pump for an extended period, ensure it is clean and dry.

9. Troubleshooting

If you encounter issues with your JYPC-7A pump, consider the following:

  • Pump Not Starting:
    • Check power supply: Ensure the pump is receiving the correct voltage (AC 220V-240V, 50Hz).
    • Check wiring: Verify all electrical connections are secure.
    • Internal blockage: Inspect for any blockages in the inlet or outlet.
  • Low Pressure/Flow:
    • Fluid level: Ensure the water tank has sufficient liquid.
    • Blockage: Check hoses and pump for any obstructions.
    • Leaks: Inspect all connections for leaks that could reduce pressure.
  • Unusual Noise:
    • Air in system: Bleed any air from the system.
    • Dry running: Ensure the pump is not running without liquid.
    • Loose components: Check for any loose parts or connections.

This pump does not feature automatic pressure shut-off or turn-on based on pressure drops. It operates when power is supplied. If you require such functionality, external pressure switches or control systems would be necessary.

10. User Tips

  • Prevent Dry Running: Many users report that the original pump failed due to running dry. Always ensure your water tank has sufficient liquid to prevent damage to the JYPC-7A.
  • Connector Compatibility: The included variety of male and female connectors (S, M, L) is provided to ensure compatibility with different machines. Take your time to select and install the correct ones for a secure fit.
  • Wiring Simplicity: Don't overthink the wiring. The pump's wires can be connected in any order, simplifying the replacement process.
  • External Control: If your application requires automatic pressure control (e.g., turning off when a set pressure is reached), you will need to integrate an external pressure switch or control system, as the pump itself does not have this feature.

11. Warranty and Support

This product is manufactured to high-quality standards. For any issues or technical support, please refer to the official user manual PDF for more detailed information or contact your retailer. The official user manual can be found at: Jiayin JYPC-7A User Manual (PDF).

© 2024 Jiayin. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.