T16X-S Mk3 Pix Lite Mk3 Long Range Pixel Controller
“
Specifications:
- Product Name: PixLite Mk3 Long Range
- Transmitter and Receiver Pairing
- Power Source: DC power
- Maximum Number of Receivers per Transmitter: Varies
- Compatibility: Various pixel types
Product Usage Instructions:
1 – Transmitters and Receivers
PixLite Mk3 long range systems are designed for pairing a
transmitter with a receiver type. Each pairing has unique purposes
and advantages in terms of connecting pixel runs and compatible
pixel types. Each transmitter has a maximum number of receivers it
can connect to. Multiple transmitters can be used in the same
system when more receivers are required.
2 – Wiring a Transmitter
The Aux Port pinout for wiring a transmitter is provided in the
user manual.
3 – Wiring a Receiver
To power receivers and connected pixels, connect a DC power
source to the receiver’s input power terminal. Refer to the
receiver’s user manual for voltage range, output current capacity,
and suitable wire information. Connections to the PixLite
transmitter, pixel LEDs, and DC power supply are specified based on
the type of PixLite model being used.
4 – Startup & Network Connection
4.1 – Startup
Upon initial startup, the PixLite will use DHCP/AutoIP. The
status LED will flash green to indicate normal operation. Connect
the PixLite directly to your computer if no router is available and
open Advatek Assistant 3 for configuration.
4.2 – Advatek Assistant 3
Download and install Advatek Assistant 3 from the provided URL.
Use this tool to discover and configure active PixLite devices on
the network.
5 – Further Information
For detailed management and configuration information, refer to
the PixLite Mk3 Management Guide available for download on the
provided link. Contact our support team for any additional
queries.
FAQ:
Q: How do I register the warranty for my PixLite Mk3 Long
Range?
A: To register the warranty, visit the warranty registration
link provided in the user manual. The device comes with an extended
warranty period of 5 years subject to registration.
“`
PixLite Mk3 Long Range Quick Start Guide
1 – Transmitters and Receivers
PixLite Mk3 long range systems are built by pairing a transmitter with a receiver type. Each pairing has unique purposes and advantages, particularly in how many pixel runs can be connected, and what pixel types can be used. These are shown below. Each transmitter has a maximum number of receivers it can connect to. In situations where more receivers are required, multiple transmitters can be used alongside each other in the same system.
www.advateklighting.com
– 1PixLite Mk3 Long Range Quick Start Guide V20250606
2 – Wiring a Transmitter
The transmitter can be connected to mains power (100-240V AC, 50/60Hz) with the IEC power input. An Ethernet cable should also be connected to either of the Ethernet Ports, allowing connection to a local network, or directly to a PC. The numbered RJ45 ports are for connection to the receivers, using twisted pair cable with nominal 100 Ohm characteristic impedance (e.g. Cat 5 or Cat 6 cable), and can be up to 300 meters in length. The Aux Port is used for connecting DMX512 (configurable as input or output). These connections for the different transmitter options are all shown below.
The Aux Port pinout is shown below.
www.advateklighting.com
– 2PixLite Mk3 Long Range Quick Start Guide V20250606
3 – Wiring a Receiver
Receivers and their connected pixels are powered by connecting a DC power source to the receiver’s input power terminal. Voltage range, output current capacity, and suitable wire is found in the receiver’s user manual and printed on the enclosure. Connections to the PixLite transmitter, pixel LEDs, and DC power supply are as follows:
When connecting to a PixLite T8-S Mk3, pixels are connected as follows:
When connecting to a PixLite T16X-S Mk3, pixels are connected as follows:
1 For pixels that do not have a clock input, this pin is not connected.
2 Many pixels with a backup data input do not require it to be connected to the PixLite as shown. See pixel glossary on the Advatek website to confirm pixels which require a backup connection to the PixLite.
www.advateklighting.com
– 3PixLite Mk3 Long Range Quick Start Guide V20250606
4 – Startup & Network Connection
4.1 – Startup
Upon startup for the first time, the PixLite will be using DHCP/AutoIP and the status LED will flash green, indicating normal operation. If you have a router, then DHCP will automatically assign an IP address to both the PixLite and your computer.
No Router? No Problem. Simply connect the PixLite directly to your computer, and open Advatek Assistant 3.
4.2 – Advatek Assistant 3
The easiest method for connecting to the device is by discovering through Advatek Assistant 3. Advatek Assistant 3 can be downloaded and installed, using the URL below: www.advateklighting.com/advatek-assistant-3
Any active PixLite devices on the network will automatically be discovered and displayed. Double click to open its Management Interface, and begin configuring your new PixLite.
www.advateklighting.com
– 4PixLite Mk3 Long Range Quick Start Guide V20250606
5 – Further Information
For a more in- depth understanding of the device, including physical installation, electrical connections, network connections, operation, and specifications, you should consult the User Manual: www.advateklighting.com/downloads/user-manuals/pixlite-t8-s-mk3 www.advateklighting.com/downloads/user-manuals/pixlite-t16x-s-mk3 www.advateklighting.com/downloads/user-manuals/pixlite-r1f-s www.advateklighting.com/downloads/user-manuals/pixlite-r2f-s www.advateklighting.com/downloads/user-manuals/pixlite-r4d-s
You’ll find information on management and configuration of the device, including its internal SHOWTime feature set in the PixLite Mk3 Management Guide: www.advateklighting.com/downloads/user-manuals/pixlite-mk3-management-guide
For any other questions, you can reach out to our support team at the link below: www.advateklighting.com/contact
6 – Warranty Registration
For your complete peace of mind, this device comes with an industry leading extended warranty period of 5 years, subject to registration.
Please register your Advatek PixLite® Mk3 product using the link below. www.advateklighting.com/warranty-registration
All products need to be used and installed as outlined in the user manual. See our terms and conditions of sale at the link below for information on returns, faults and warranty claims. www.advateklighting.com/terms/sale-terms-and-conditions
www.advateklighting.com
– 5PixLite Mk3 Long Range Quick Start Guide V20250606
Documents / Resources
 |
Advatek T16X-S Mk3 Pix Lite Mk3 Long Range Pixel Controller [pdf] Instruction Manual T16X-S Mk3, T8-S Mk3, T16X-S Mk3 Pix Lite Mk3 Long Range Pixel Controller, T16X-S Mk3, Pix Lite Mk3 Long Range Pixel Controller, Long Range Pixel Controller, Range Pixel Controller, Pixel Controller |