ADVANCE TABCO SU-P-208 High Limit Switch
OVERVIEW
-
CHECK FOR CONCEALED DAMAGE FILE CLAIM WITH DELIVERING FREIGHT CARRIER
TOOLS REQUIRED
- Philips Head Screw Driver
- STEP 1:
Unplug or turn off the breaker powering the unit. Disconnect the wiring from the existing High Limit Switch.
- STEP 2:
Connect the wiring to the new High Limit Switch. Using the #10 sheet metal screws, install the mounting to the element pan as shown.
For Further Assistance
Contact Customer Service at: 800-645-3166 or customer@advancetabco.com
Documents / Resources
 |
ADVANCE TABCO SU-P-208 High Limit Switch [pdf] Instruction Manual SU-P-208 High Limit Switch, SU-P-208, High Limit Switch, Limit Switch, Switch |
