Router 834-5 Wi-Fi Network
Installation Guide
Router 834-5 Wi-Fi Network
***For Wired set up with CAT6 Patch Cord***
Enter URL on Internet browser 192.168.10.0. The ADTRAN guided walk-though will be displayed to begin installation of the Wi-Fi Network.
***For Wireless access to GUI***
Navigate to the Wi-Fi settings on a mobile device and select the “Setup-ADRTRAN-XXXX”. A few moments later the ADTRAN guided walk-through page will displayed to set up the Wi-Fi network.
For access to the device, please contact Crocker Tech Support for login information at 413-654-1000 or send an email at support@crocker.com
Press Continue
Select next
Select next
Select Router to Continue
Select next to Continue
Select the “Controller” option to continue
Here you can personalize your Wi-Fi Network name and password for easy identification in your home. After choosing the new name and password press continue to save. Be advised device may reboot.
Here you can set up a guest Wi-Fi access to your home if so desired. Press the applicable option to continue.
Review and record your new Wi-Fi network information. Select “Finish” to continue. Device may reboot to apply settings.
Setup is complete.
Your are now ready to begin connecting your devices to your new Wi-Fi Network.
Documents / Resources
 |
ADTRAN Router 834-5 Wi-Fi Network [pdf] Installation Guide Router 834-5 Wi-Fi Network, 834-5 Wi-Fi Network, Wi-Fi Network, Network |
