WF-710G OpenSync Wi-Fi7 DeskPod AP
Specifications
- Desktop placement
- 2.4GHz 802.11b/g/n/ax/be, 2×2, 20/40MHz
- 5GHz 802.11a/n/ac/ax/be, 4×4, 20/40/80/160MHz
- 6GHz 802.11a/ax/be, 4×4, 20/40/80/160/320MHz
- WPA2/WPA3 PSK Security
- BLE 5.1
- Integrated antennas
- 1 x 10GbE WAN/LAN
- 1 x 2.5GbE LAN
- 1 x Status LED (multi-color)
- 1x DC jack with AC power adapter
- OpenSyncTM certification( On going )
- Integrated with Plume Cloud Management and the Plume Mobile
Management Applications
Product Usage Instructions
Overview
The WF-710G is a tri-band Wi-Fi 7 device designed for extending
Wi-Fi network connectivity in homes and businesses. It features the
latest 802.11be chipset design for enhanced wireless
performance.
Key Features
- Supports 802.11ax/802.11be on all Wi-Fi radio bands including
2.4G, 5G, and 6G. - Offers up to nearly 10Gbps aggregate throughput.
- Meets requirements for high-speed real-time traffic and
high-bandwidth entertainment. - Integrates with OpenSyncTM Control Plane for streamlined device
management and advanced control capabilities.
Configuration Scenario
Three WF-710Gs can form a Wi-Fi mesh network, with one
configured as the Gateway and the other two as Wi-Fi Extenders.
Software Features
Actiontec reserves the right to make changes to software
features without notice.
FAQ
Q: Can I use the WF-710G in a large office environment?
A: Yes, the WF-710G is suitable for both home and business
environments, including large office spaces.
Q: How do I reset the WF-710G to factory settings?
A: To reset the WF-710G to factory settings, locate the reset
button on the device and press and hold it for at least 10 seconds
until the status LED blinks.
Q: Does the WF-710G support guest Wi-Fi networks?
A: Yes, the WF-710G supports setting up guest Wi-Fi networks for
temporary access by visitors or clients.
OpenSyncTM Wi-Fi7 DeskPod AP WF-710G
Product Datasheet
VERSION1.1 March, 2025
www.actiontec.com
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
1
Overview
The WF-710G is a tri-band Wi-Fi 7 device specifically designed to extend Wi-Fi network connectivity for homes and businesses. It is built with the latest 802.11be chipset design, providing advanced features and capabilities for enhanced wireless performance.
The WF-710G integrates with OpenSyncTM Control Plane, a framework launched by Plume. OpenSyncTM provides streamlined device discovery, configuration, control and remote management through the Plume Cloud.
With the WF-710G, users can leverage Plume HomePass and WorkPass functionality. Plume HomePass and WorkPass offer a self-configuring, self-healing, and self-managing Wi-Fi network experience. These features streamline the setup process, automatically optimize network performance, and ensure seamless connectivity throughout the home or workplace.
The WF-710G dynamically selects reliable Wi-Fi paths and enables seamless handoffs for end users. It interoperates with other OpenSyncTM devices, like the Plume Wi-Fi 7 products for enhanced network performance.
With up to nearly 10Gbps aggregate throughput, WF-710G is one of the best performing Wi-Fi 7 Plume routers/extenders in the market. It supports 802.11ax/802.11be on all Wi-Fi radio bands including 2.4G, 5G and 6G.
The WF-710G meets the requirements for high-speed real-time traffic and high-bandwidth entertainment, including 4K video, video game streaming, and VR. It is designed to deliver smooth and reliable performance for demanding applications and activities that require significant network bandwidth.
The integration OpenSyncTM greatly enhances the user experience for both network operators and end users by providing streamlined device management and advanced control capabilities.
Key Features
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
2
Desktop placement 2.4GHz 802.11b/g/n/ax/be, 2×2, 20/40MHz 5GHz 802.11a/n/ac/ax/be, 4×4, 20/40/80/160MHz 6GHz 802.11a/ax/be, 4×4, 20/40/80/160/320MHz WPA2/WPA3 PSK Security BLE 5.1 Integrated antennas 1 x 10GbE WAN/LAN 1 x 2.5GbE LAN 1 x Status LED (multi-color) 1x DC jack with AC power adapter OpenSyncTM certification( On going ) Integrated with Plume Cloud Management and the Plume Mobile Management Applications
Configuration Scenario
Three WF-710Gs can form a Wi-Fi mesh network, with one WF-710G configured as the Gateway and the other two configured as Wi-Fi Extender (See the picture below).
Software Features
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
3
Category Network
Wi-Fi
Mobile App Management LED
Features Bridge Mode
– DHCP Client – Backhaul with 2.4G/5G/6G Wi-Fi/Ethernet Router Mode – IPv4/IPv6 – NAT – WAN DHCP Client – LAN DHCP Server – DNS Server – DHCP Reservation – UPnP – Port Forwarding – Backhaul with Ethernet IGMP Snooping/Proxy 2.4GHz bandwidth: 20/ 40MHz, 5GHz bandwidth: 20/40/80/160MHz 6GHz bandwidth: 20/40/80/160/320MHz
802.11 k/ v/ r
Band Steering
Channel Scan
DFS
SSID Broadcast
WPA2/WPA3 PSK Security uAPSD
Device Discovery
Add/Delete the Device
Configure SSID
Configure Password
Auto Upgrade
Antivirus
Solid Green: Power On.
Blue Blinks: Connecting to the Cloud.
OFF: Connected to the Cloud.
Blue Double Blinks: Network Optimization or Device Locating
Category
Features
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
4
Cloud Management
Network Topology Display – Device connected – Client accessed – Channel – Backhaul type
Location-Based Network SSID
WPA2/WPA3 PSK Security
Client Freeze
Motion Detection
Device Information – Status – Online time – IP address – MAC address – Firmware version – Channel Client Information – Status – Online time – IP address – MAC address – Channel Network Statistics Report
– Bandwidth usage – RSSI – Channel congestion – Event
-Other metrics/indicators
Other Utilities – Reboot device – Remote software/firmware update – Network performance test
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
5
Technical Specifications
Item
Description
System Hardware Spec
Dimension
190mm (L) x 138mm (W) x 80mm (D)
Weight Installation LEDs Ethernet Interface
650g Desktop
1x Status LED (multi-color)
1 x 10GbE RJ45 WAN 1 x 2.5GE RJ45 LAN
Flash DDR Input Voltage Power consumption Temperature
Operating Humidity Elevations Dustproof and Waterproof
256MB NAND Flash 1GB DDR4 RAM
12V@3A DC input
Average 36W Operation: -5°C ~ +40°C Storage: -40°C ~ +70°C 5%95% (non-condensing) 86kPa106kPa Altitude IP30
· FCC · ETL
6
Item
Description
Certificate &Compliance MTBF AFR
· CE · RoHS 2011/65/EU Compliant (RoHS 10 Compliant, No Pb)
> 300,000 Hours Telcordia SR-332: Reliability Prediction Procedures for Electronic Equipment, Issue 3, Method 1, Case 3. This is based on a GB/GC (Ground Benign, Controlled) environment with a steady state condition at a 25ºC ambient temperature. It does not account for software failures.
AFR (Annualized Failure Rate) < 1.5% (in continuous operation)
Wi-Fi Spec Operating Frequency
Data Rate
Typical Receive Sensitivity (per chain @ antenna interface)
2.4G:2.4000GHz~2.4835GHz
5G: 5.150~5.250, 5.250~5.350, 5.470~5.725, 5.725~5.835 GHz 6G: 5.945~7.125GHz BLE : 2.400GHz~2.500GHz
802.11b: 1, 2, 5.5, and 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54Mb/s 802.11n: MCS0~MCS7 802.11ac: MCS0 ~ MCS9 802.11ax: MCS0~MCS11 802.11be: MCS0~MCS13
2.4G: Bandwidth 11n
11ac
11ax
11be
Rate
MCS0-HT40 MCS7-HT40 MCS0-VHT40 MCS9-VHT40 MCS0-HE40 MCS11-HE40 MCS0-EHT40 MCS13-EHT40
Sensitivity(dBm) -90 -71 -90 -66 -89 -61 -89 -54
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
7
Item
Antenna Pattern (Built-in Antennas)
Description
5G: Bandwidth 11n
11ac
11ax
11be
Rate
MCS0-HT40 MCS7-HT40 MCS0-VHT160 MCS9-VHT160 MCS0-HE160 MCS11-HE160 MCS0-EHT160 MCS13-EHT160
Sensitivity(dBm) -89 -69 -83 -59 -83 -55 -83 -48
6G:
Bandwidth Rate
11a
6M
11ax
54M MCS0-HE160
11be
MCS11-HE160 MCS0-EHT160
MCS13-EHT160
MCS0-EHT320
MCS13-EHT320
Sensitivity(dBm) -91 -74 -82 -54 -82 -48 -79 -45
Antenna#
Frequency(MHz) Efficiency Peak Aggregated Realized Gain [dBi]
2.4G Singleband 2.4G >70%
>3
5G singleband 5G >70%
>3
6G singleband 6G >65%
>3
BLE
2.4G >60% >3
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
8
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. FCC regulations restrict operation of this device to indoor use only. The operation of this device is prohibited on oil platforms, cars, trans, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10000 feet. Operation of transmitters in the 5.925-7.125
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
9
GHz band is prohibited for control of or communications with unmanned aircraft systems.
Contact Information
Actiontec Electronics, Inc.
2445 Augustine Dr., Suite 501 Santa Cara, CA 95054 Tel: +1(408) 837-4800
Email: broadband-sales@actiontec.com
Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation.
10
Documents / Resources
 |
Actiontec WF-710G OpenSync Wi-Fi7 DeskPod AP [pdf] User Manual WF710G, LNQ-WF710G, LNQWF710G, WF-710G OpenSync Wi-Fi7 DeskPod AP, WF-710G, OpenSync Wi-Fi7 DeskPod AP, Wi-Fi7 DeskPod AP, DeskPod AP, AP |