ACROPAQ - Logo

SHORT INSTRUCTION MANUAL

80004 – Monitor support with pressure spring for 1 screen from 17 to 27 inches

  1. Open the box
    ACROPAQ Monitor Support - Open the box
  2. Take the screws
    ACROPAQ Monitor Support - Take the screws
  3. Attach the pieces
    ACROPAQ Monitor Support - Attach the pieces
  4. Now attach the monitor to the arm
    ACROPAQ Monitor Support - Now attach the monitor
  5. Adjust the viewing angle to your taste
    ACROPAQ Monitor Support - Adjust the viewing angle to your taste
Contents hide
1 Documents / Resources
1.1 References
2 Related Posts

Documents / Resources

ACROPAQ Monitor Support with Pressure Spring [pdf] Instructions
ACROPAQ

References

Related Posts

Leave a comment

Your email address will not be published. Required fields are marked *