AcraDyne Gen IV Controller
Specifications
- Controller: Gen IV
- Cable Length: Not to exceed 20m
- Grounding: Redundant Earth ground required
Product Usage Instructions
Step 1: Make Connections
- A. Connect the tool cable to the Gen IV Controller. Ensure the cable length does not exceed 20m.
- B. Connect the power cord to the controller.
- C. Connect the Redundant Earth ground as it is required for proper operation.
Step 2: Power on the Controller
Consult the manual for detailed instructions on how to properly ground the controller if necessary.
Step 3: Import Default PSets
- On the Controller’s Main Display Menu, press [specific button].
- This action will import three default PSets that are now editable.
- Additional PSets can be added by using the Add and Edit buttons.
Note: When connecting through the web browser interface, follow the same process. Refer to the Gen IV controller manual for connection instructions available at www.aimco-global.com/manuals.
AIMCO Technical Support Call Guide
| Service/Repair | ||
| Service Training | Bill Kearney | Ken Maio |
| Direct: (503) 262-3447 | Direct: (503) 262-3406 | |
| (503) 254-6600, ext. 147 | (503) 254-6600, ext. 206 | |
| (800) 852-1368, ext. 14 | (800) 852-1368, ext. 206 | |
| Service/Repair AcraDyne Tools | Gregg Walters | Bill Kearney |
| (503) 262-3420 | Direct: (503) 262-3447 | |
| (503) 254-6600, ext. 354 | (503) 254-6600, ext. 147 | |
| (800) 852-1368, ext. 354 | (800) 852-1368, ext. 147 | |
| Service/Repair Electronics | Greg Charland | Donna Richmond |
| Direct: (503) 262-3497 | (503) 254-6600, ext. 208 | |
| (503) 254-6600, ext. 207
(800) 852-1368, ext. 207 |
(800) 852-1368, ext. 208 | |
| Service/Repair Pneumatic Tools | Gregg Walters | Bill Kearney |
| (503) 262-3420 | Direct: (503) 262-3447 | |
| (503) 254-6600, ext. 354 | (503) 254-6600, ext. 147 | |
| (800) 852-1368, ext. 354 | (800) 852-1368, ext. 147 | |
| Technical Assistance | ||
| AcraDyne Tool Performance | Ken Maio | |
| and Specifications | Direct: (503) 262-3406
(503) 254-6600, ext. 206 |
applications@aimco-global.com |
| (800) 852-1368, ext. 206 | ||
| Electronics Performance | Greg Charland | Ken Maio |
| and Specifications | Direct: (503) 262-3497 | Direct: (503) 262-3406 |
| (503) 254-6600, ext. 207 | (503) 254-6600, ext. 206 | |
| (800) 852-1368, ext. 207 | (800) 852-1368, ext. 206 | |
| Pneumatic Tool Performance | Bill Kearney | Ken Maio |
| and Specifications | Direct: (503) 262-3447 | Direct: (503) 262-3406 |
| (503) 254-6600, ext. 147 | (503) 254-6600, ext. 206 | |
| (800) 852-1368, ext. 14 | (800) 852-1368, ext. 206 | |
FAQ
Q: What should I do if the controller does not power on?
A: Check the power cord connection and ensure it is securely plugged in. Also, verify that the power source is active.
Q: How do I add new PSets to the controller?
A: To add new PSets, navigate to the Main Display Menu and use the Add and Edit buttons to create and customize additional PSets.
Documents / Resources
 | Gen IV Controller |
References
- global.comglobal.com
- Aimco-Global | Tough tools Made in the USA.www.aimco-global.com
- User Manualmanual.tools