ACKSYS APNUS043 WaveManager Wireless Network Management User Guide
Introduction
The Acksys WaveManager On-Premise is a comprehensive wireless network management tool designed specifically for industrial and transportation environments. This software solution enables real-time monitoring, configuration, and optimization of wireless devices, ensuring seamless communication and reliability in mission-critical applications.
The purpose of the On-Premise release is to be used on a local network with WaveOs MQTT devices.
The On-Premise Release is designed to operate within a local network, specifically for use with WaveOS MQTT devices.
This version leverages a licensing system, which must be activated to unlock the advanced features of the RMS.
This application note serves as a comprehensive guide for installing WaveManager On-Premise on various platforms, including Microsoft Windows and Linux Ubuntu.
Prerequisites
Before starting the installation, ensure the following are in place:
Hardware Requirements:
- Processor: Minimum quad-core CPU (e.g., Intel Xeon, AMD Ryzen).
- Memory: At least 16 GB RAM (32 GB recommended for large deployments).
- Storage: Minimum 100 GB of free disk space.
- Network: Static IP address for the WaveManager server.
Software Requirements:
For Server :
- Operating System:
- Ubuntu Server 24.04 or 24.04 LTS (recommended)
- Windows 10, Windows Server 2019.
- DataBase:
- In case of using an external Database
- PostgreSQL 15+ DataBase (Recommended).
- MSSQL Database
For Product:
- Operating System:
- WaveOs 4.28.1.1 or greater
Download WaveManager Installer
Visit the WaveManager official portal and download the appropriate on-premise installation package:
- For Linux: .deb file.
- For Windows: .exe file.
Installation Step
Let saying finally, the downloading part of our WaveManager installation process is done.
For Windows Server
So, we can now begin WaveManager installation from the setup Wizard. Click next to continue.
NOTE: If you have already installed another WaveManager instance, please we recommended you to close all other applications before continuing.
As a result of everything we have done, you will find the install process is going on just like the following image.
On the next step, you will choose the type of database you want to install in the provided option.
Local DataBase Installation
- Description: The database is installed on the same server or within the local network of the partner
External DataBase Installation
- Description: The database can be hosted on a remote server or an external database server managed by a third party PostgreSQL or MSsql).
NOTE: Both options are viable, and the choice depends on the partner’s specific needs, budget, and IT policies. It is crucial to perform a requirements analysis and collaborate closely with the partner to decide on the best deployment approach.
Click on the type of database install , You will find a form to fill up the database information. Enter the Database name, username, password and the IP address of your database server in the form. For this example, the correct database configuration should look like the following image.
Do not forget to replace the database name, username, password, and Database host (The IP address of your database server) in the form. Once the information is entered correctly, press the Next button to submit the form.
If the database information is not correct, you can edit the database fields in the following form:
“Please update the WaveManager database with the relevant information after completing the necessary actions. Ensure that all fields are populated accurately and double-check for consistency to avoid discrepancies.”
Finally, After entering all the required information in the form, Click on the Update button to install the WaveManager database.
Congratulations! You have successfully configured WaveManager with the external database.. All the database queries will be executed on our database server.
For Linux Server
Update the System
sudo apt update && sudo apt upgrade -y
Install WaveManager Packet
After downloading the Linux WaveManager packet acksys-wavemanager_4.2.0.1RC2_amd64.deb, type the following command to install the packet:
Sudo apt-get install -f ./acksys-wavemanager_4.2.0.1RC2_amd64.deb
Installation OverView
Please note that during the installation process, you are invited to set the Database password.
PostgreSQL Database service Status (once installed)
Mosquitto Service Status (once installed)
Configure your Admin account (First Login)
Open a browser and navigate to http://.<server-ip>:5000 or the domain configured and you will be invited to fill the login form and configure your admin account.
Quick test to check our new install
Please configure an Acksys router to interact with the MQTT broker (WaveManager MQTT broker), you need to set up the router to act as an MQTT client. ACKSYS router support direct MQTT client functionality on the firmware version 4.28.1.1 or higher.
Configure your router to connect to the broker
Access the Web UI:
- Log in to the router’s web interface.
- Navigate to Setup > Services > Cloud > and provide necessary information to configure the router .
Set Up MQTT Connection:
- Enter the Broker’s details:
- Enable cloud : enable MQTT service
- Cloud type : Personal
- Service identification : Management purposes, this field is mandatory. Provided by the web interface when cloud is personal.
- Server: The broker’s IP or hostname (here WaveManager IP Address).
- Port: The MQTT port.
- Encryption TLS : If required by the broker.
- Authentication TLS: If required by the broker.
Apply and Save Configuration:
- Ensure the MQTT service is enabled.
- Save and apply the configuration.
| Field name | Sample | Description |
| Enable | Checked | Enable MQTT service |
| Cloud Type | personal | Personal Cloud |
| Service identification | On_Premise_WM | This field is mandatory. Provided by the web interface when cloud is personal. |
| Server | 192.168.10.17 | Remote Broker’s address à Wave Manager On-Premise |
| Port | By default :1883 | Select which port the broker should use to listen for connections |
| Encryption TLS | Unchecked | Enable TLS/SSL authentication for the broker |
| Authentication TLS | Unchecked | Enable TLS/SSL authentication for the broker |
Connect on the WaveManager On-Premise
Access WaveManager:
Open a browser and navigate to http://<server-ip>:5000 or the domain configured and you will be invited to fill
login/password.
Add new products:
Products Association:
For further assistance, consult the official WaveManager documentation or contact support.
Support : https://support.acksys.fr.
Documents / Resources
 |
ACKSYS APNUS043 WaveManager Wireless Network Management [pdf] User Guide APNUS043, APNUS043 WaveManager Wireless Network Management, WaveManager Wireless Network Management, Wireless Network Management, Network Management |
