Acer HB02 Computer Headset

Package Contents

Overview

Power ON/OFF

2.4GHz USB Dongle Mode Usage

Note: Press and hold the power on button for more than 5 seconds, release your finger when you hear Power On and Pairing.

MIC ON/OFF

Headset Charging

Note
No audio input in the connected state, 10 minutes to enter the hibernation state, 60 minutes to turn off the power automatically. Wake up from hibernation: Wake up from hibernation automatically with audio input or by clicking the power button.Low Battery Reminder: When you hear the low battery tone and the red light flashes, please charge the headset in time. Wireless and 2.4GHz modes will not work during the charging process.

Using with Phone in Wireless Mode

If you want to go back to 2.4GHz mode, press the power button twice and you will hear a tone saying ‘USB Mode’
Note: Frequent switching of modes will cause the headset connection to slow down.

Wireless Mode Usage

Connecting Two Devices

1. Turn on the headset and plug the USB dongle into the PC to connect.
2. Double-click the Power button to switch to wireless mode and connect to HB02 on your phone.
3. Double-click the Power button to switch back to USB mode. When connected to your phone, you will receive call notifications.

Managing Two Devices

Switching Sound Sources
When both the mobile phone and computer are connected, double-click
The Power button to switch between wireless connection and 2.4GHz
USB dongle.

Answering Two Calls

1. While on a call on the computer, if your mobile phone rings, click the Power button to answer the mobile call.
2. During a mobile phone call, you can’t switch the audio source to the computer. Mer hanging up, the audio will switch back to the computer automatically.
3. When you receive a call reminder on the computer, click the Answer/Reject icon on the computer. While on a mobile call, If YoU receive a chat Invitation on the computer after hanging up, you can switch the audio to the computer.

Specifications

• Model ………………………………………………………………………… HB02
• Battery Capacity ………………………. . .. 350mAh/3. 7V
• Wireless Mode Working Hours …………………………. About 36 hours
• 2.4GHz USB Mode Working Hours ……………………. About 27 hours
• Charging Time …………………………… . .. ……. 2±0.5 hours
• Standby Time ………………………………………………. About 200 hours
• Product Input ………………………………………….. Type-C, DC5V/0.3A
• Frequency Response ………………………. . .. 20Hz-20KHz
• Sensitivity ……………………………………………………………… 100±3dB
• MIC Sensitivity ………………………………………………………… -42±2dB

2.4GHz USB Dongle

The 2.4GHz connection is available on Windows/ Mac.

Charging and Working Time

1. Please charge the headset with 5V/0.3A standard adapter or via the USB port of PC;
2. Generally,lt takes about 2 hours to fully charge the headset, but. Actually, the charging time may vary according to different charging devices.

The Microphone can not work

Wireless mode:

1. Check whether you’ve set the headset as the default recording device.
2. Check If the microphone has been turned off.

No Sound or Intermittent Sound from the Headset

1. Check if there are other obstacles which affect the transmitter.
2. lf intermittent sound occurs when you are communicating. Check whether the network of your device works smoothly.
3. Check whether you’ve set the headset as the default recording device.
4. Check whether the headset Is In the lowest volume setting.

Can’t Connect to Devices

1. Check whether you used a USB Extension Cable or USB Hub. It is not recommended.
2. Plug directly into the USB jack of the device’s host.
3. Try to replace a USB jack. (Some USB jacks may experience a power shortage.)
4. For PC, it is recommended to plug into the USB jack at the back of the host.
5. For PC, press and hold the power on button for more than 5 seconds (the red and blue light flashes to enter the search), and then release the button when you hear Power On and Pairing.

We can’t meet all our customers’ expectations, but we try to meet them.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following. measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

RF Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operations as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or set the device to lower output power if such a function is available.”

Documents / Resources

Acer HB02 Computer HeadSet [pdf] User Guide HB02 Computer HeadSet, HB02, Computer HeadSet, HeadSet

References

• User Manual