ACEBEAM RX2.0-TI Flashlight Killzone
FEATURES
- A fidget EDC flashlight that is perfect for everyday carrying companion
- Utilizes 1xNICHIA 519A-V1 LED CRI ≥90 color rendering, offering maximum illumination of 700lumens and 5000K color temperature
- Four brightness levels and an intelligent memory function
- Powered by one piece customized ACEBEAM 14500 rechargeable Li-ion battery with a built-inUSB-C charging port
- Alkaline or NiMH AA power source is also compatible. The AA power source battery is reliable,inexpensive, and easy to find
- Single tail-switch control for one-handed operation
- Stainless steel double-direction pocket clip enables additional carrying ways to be clipped in thepocket, the backpack, or the MOLLE system
- Optical lenses with double-sided scratch-resistant coating
- Integrated precision digital optics technology
- 1P68 grade (2 meters submersible)
- Impact resistance 1.5 meters
SPECIFICATIONS
- Size: 96.0mm x 18.6mm x 26.0mm
- Weight: 74.7 g w/ battery
INCLUDED
- 1XACEBEAM 14500 Li-ion USB-C Rechargeable Battery;
- 1xLanyard; 2xO-rings;
- 1xUSB-C Cable; 1x User Manual
TECHNICAL PARAMETER
Notice: The above-mentioned parameters have been measured under the international flashlight testing standard ANSI/NEMA FL1, and are approximate and may vary from flashlights, batteries, and environments.
OPERATING INSTRUCTION
ON/OFF: Fully single-click the switch.
Output Selection:
With the light switched OFF press the switch or rapidly fully click the switch for 1 second to cycle through Ultra-Low→Low→ Med→ High.
Intelligent Memory Circuit
The light memorizes the last selected output When turned on again after 3 second, the previously used output will be recalled.
BATTERY CHARGING INDICATOR
- If the battery needs to be replaced, make sure that the positive pole(+) end of the new battery is towards the flashlight head when you put it in.
AVAILABLE BATTERIES
- Including 1 x Customized 14500 Lithium
- battery / Compatible 1 x 1.5V AA Alkaline
- battery / Compatible 1 x NiMH battery
INSULATING FILM
- Before first use, push down the clip, unscrew the flashlight head, and remove the insulating film.
- Please fully charge the ACEBEAM 14500 battery with the provided standard USB-C charging cable.
USAGE AND MAINTENANCE
- Unauthorized disassembly may damage the light and void the warranty.
- Lubricate the threads with professional-grade lubricant regularly.
- Please swap out the O-rings regularly to maintain the water resistance level.
- Maintain and keep clean any contact surfaces of the flashlight with an alcohol swab. This may prevent irregular flashes during use.
warning
- By using this device, you certify you have read the included User Manual and Warning Card and release the manufacturer and retailers from all liabilities.
- Please use in accordance with applicable laws and regulations.
- Keep out of reach of children.
- DO NOT shine the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes.
- DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.
- DO NOT modify/disassemble the light, otherwise, the user will be in charge of the all responsibility.
- When the product is used in a low- temperature environment, please try and keep it warm. If the temperature is too cold, it may not reach the High output.
- Please keep the front lens clean. Due to radiation ennergy, it may heat up foreign matter on the lens which can potentially cause damage.
- Please charge the battery with the included standard charging cable.
- Quality batteries with circuit protection will reduce the potential risk.
- Store the battery with care. Please store the battery in a dedicated box after being taken out of the product if the battery needs to be changed.
- Keep it in a being in normal use; We will replace it with the same model. If the model has been discontinued, customers will receive a product with similar or improved model.
PRODUCT WARRANTY
- If the customer experiences any problems with an Acebeam product within 15 days of purchase, the dealer will replace that product.
- If an Acebeam flashlight fails duringnormal use within a period of five years(60months)of purchase, the dealer willrepair or replace the flashlight with thesameor similar model.
- ACEBEAM Batteries, accessories, and lanterns with built-in batteries are granted for one year (12months) from date of purchase.
- The warranty does not cover damage orfailure caused by:
- A. Rough usage or operation which doesnot comply with the user manual orproduct specifications.
- B. Unauthorized disassembly, repair ormodification. Defects or damaged causedby factors out of Acebeam’s control.
- C. Battery leakage damaged products.
- If there are any questions about Acebeamproducts, please consider the warrantyand contact Acebeam or your originalAcebeam dealer for warranty returninstructions. Email: info@acebeam.com
Acebeam is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.
CONTACT
- SHENZHEN ZENBON TECHNOLOGY CO., LTD
- +86-0755-23036551
- www.acebeam.com
- info@acebeam.com
- 1/F, No. 1 Building, Yijiayang Industrial Park, Dalang,
- Longhua, Shenzhen 518100, Guangdong, China
- Copyright © 2024 ACEBEAM. All rights reserved.
- Powered by Shenzhen Zenbon Technology Co., Ltd
Documents / Resources
 |
ACEBEAM RX2.0-TI Flashlight Killzone [pdf] User Manual RX2.0-TI Flashlight Killzone, RX2.0-TI, Flashlight Killzone, Killzone |