AC Infinity CONTROLLER 75 PRO Independent Programs User Guide

AC Infinity CONTROLLER 75 PRO Independent Programs

Product Information

Specifications:

• Compliance: Part 15 of the FCC Rules
• RF Exposure Guidelines: Maintain a minimum distance of 20cm between the device and your body
• Antenna: Must not be co-located or operated in conjunction with any other antenna or transmitter

Product Usage Instructions

Installation:
Properly install the device following the manufacturer’s guidelines to ensure optimal performance and compliance with FCC regulations.

Operation:
Operate the device according to the provided instructions to prevent any undesired operation or interference.

Maintenance

Regularly maintain and inspect the device to ensure continued compliance with FCC regulations and optimal performance.

STEP 1
Plug the sensor probe into the 3.5mm port located at the bottom side of your controller.

STEP 2
Insert the power plug into a wall outlet to power your controller.

STEP3
Position the corded sensor probe and secure it by using the included zip ties and tie mounts.

STEP4
Locate a spot free of obstruction and secure the anchor into your wall. Twist the wood screw into the anchor.

STEP 5
Hang your controller by the screw using the hole located on its backside.

PROGRAMMING

1. OUTLET BUTTON
   Cycles through the two outlet devices. Each outlet device is programmed independently, or together when navigating to ALL.
2. MODE BUTTON
   Cycles through the controller’s modes: OFF, ON, AUTO (4 triggers), VPD (2 triggers), TIMER TO ON, TIMER TO OFF, CYCLE (ON and OFF), and SCHEDULE (ON and OFF).
3. UP/DOWN BUTTONS Adjusts the value of your current mode. The up button increases and down button decreases the setting. Hold both to reset values to OFF or 0.
4. SETTING BUTTON Cycles through each of your controller’s settings: DISPLAY, CLOCK, °F / °C, CALIB. T°/H%, BRIGHTNESS, BUFF. P /H% / kPa, and LEAF OFFSET.
5. OUTLETS
   Displays your controller’s power status, indicating whether or not electricity is being fed to your device. ON will display if your devices are being powered and OFF will display if your devices are not being powered.
6. PROBETEMPERATURE Displays the current temperature that the probe is detecting. Shows”–” if no probe is plugged in. Includes a trend indicator that signals a rise, stability, or fall in temperature within the last hour.
7. PROBE HUMIDITY
   Displays the current humidity that the probe is measuring. Shows”–” if no probe is plugged in. Includes a trend indicator that signals a rise, stability, or fall in humidity within the last hour.
8. PROBEVPD
   Displays the current VPD that the probe is detecting (in kPa). Shows’–” if no probe is plugged in. Includes a trend indicator that signals a rise, stability, or fall in VPD within the last hour.
9. CONTROLLER MODE
   Displays your controller’s current mode. Pressing the mode button cycles through the available modes.
10. STATUS ICONS
    Flashes or displays the alert icons of your controller. The icons include TIMER ALERT and DISPLAY LOCK.
11. CURRENTTIME
    Displays the current time. The internal battery sustains the clock so it does not default to 00:00 if power is cut off.
12. COUNTDOWN
    Displays the countdown of the TIMER TO ON, TIMER TO OFF, CYCLE , or SCHEDULE modes. TO ON shows the amount of time left before your devices power on. TO OFF shows the amount of time left before your devices power off.
13. USER SETTING
    Displays the value of your current mode. Use the up and down buttons to adjust the value.

DOWNLOAD THE APP

THE AC INFINITY APP
The AC Infinity app enables you to connect with the next generation of our intelligent controllers, giving you access to advance programs and environmental data.

1. Download the AC Infinity app from the App Store or Play Store by searching “AC Infinity”.
2. Open the AC Infinity app and follow the instructions in the next section to pair your controller with the app.

HOW TO USE THE APP
Visit our website at www.acinfinlty.com or open your smartphone camera and scan the OR code below for more information on the AC Infinity app.

ADD A DEVICE

BLUETOOTH 

SETUP AND PAIRING
Power your device on before pairing your device with the app. Refer to the Powering and Setup section for more information regarding controller setup.

1. Tap on the”+” tab to add your smart device.
2. To launch the app, tap on the “Smart Outlets” tab to begin pairing.Please note: Bluetooth must be enabled on your mobile device before starting the pairing process.
3. Select your controller to begin pairing.
4. Hold the port button for 5 seconds to activate Bluetooth. Wait for the Bluetooth icon to start flashing on your controller’s screen.
5. Connect using Bluetooth. To connect using Wi-Fi, skip to step 8.
6. Connecting with Bluetooth will disable Wi-Fi functionality. Go to the app settings page to re-enable and connect using Wi-Fi.When pairing the app around multiple controllers, move your mobile device closer to your desired controller.
7. Tap the DONE button to complete the pairing process .WIFI
8. Log in or create an account to continue.
9. Enter your Wi-Fi network’s password. You may also connect to an alternate 2.4 GHz router*. When pairing the app around multiple controllers, move your mobile device closer to your desired controller.
10. Follow these tips if the pairing process is unsuccessful.
11. Tap the DONE button to complete the pairing process.“This controller is only compatible with 2.4 GHz frequency band routers. When connecting using Wi-R, make sure your mobile device is not connected to a 5 GHz frequency band network.
12. Your controller will appear in your smart device with a unique ID.

FCC

Warning:
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different. from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

ISED Canada Statement:
This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation,
Science and Economic Development

Canada ‘s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment

RF Exposure Statement
To maintain compliance with IC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any  other antenna or transmitter

FAQ (Frequently Asked Questions)

• Q: What should I do if I experience interference while using the device?
  A: If you encounter interference, ensure that the device is properly installed and operated according to the guidelines. Consult a dealer or technician for assistance if needed.
• Q: Can I use the device in conjunction with other antennas or transmitters?
  A: No, to maintain compliance with FCC regulations, do not co-locate or operate the device with any other antenna or transmitter.