ASM01829 Wall-Mounted E-BUS CO2 Space Sensor
“
Product Information
Specifications:
- Model: ASM01829
- Input Power: 12-34 VDC
- Sample Method Sensitivity: Diffusion or Flowthrough 50-100
ml/min - Analog Output: 0-5 VDC
- Power Consumption: 30 mW Max Average, 1.25 W Peak Power
- Operating Humidity: 5-95% RH Non-Condensing
- Measurement Range: 0 to 2000 ppm
- Resolution: +/- 1 ppm
Product Usage Instructions:
Installation:
The Wall-Mounted E-BUS CO2 Space Sensor is designed for
permanent wall mounting in the conditioned space. It connects to
the VCCX or VCB-X Controller using an E-BUS Expansion Cable. Follow
these steps for installation:
- Utilize the sub-base mounting plate for quick and easy mounting
and wiring. - Mount the sensor on the wall using the standard junction
boxes. - Secure the assembly with a locking screw.
Connection:
Connect the Wall-Mounted E-BUS CO2 Space Sensor to the VCCX or
VCB-X Controller using an E-BUS Expansion Cable for proper
integration and functionality.
Power Supply:
Ensure the input power supplied to the sensor is within the
range of 12-34 VDC for optimal performance.
FAQ:
Q: What is the measurement range of the CO2 levels that can be
monitored by the sensor?
A: The sensor can monitor CO2 levels within a range of 0 to 2000
ppm.
Q: How can I get technical assistance for installation or
troubleshooting?
A: For technical assistance, contact AAON Support at
www.aaon.com/contact
“`
WALL-MOUNTED E-BUS CO2 SPACE SENSOR
ASM01829
AAON Controls is involved in the design and selection of the sensors used with AAON units to ensure integration between sensors, controllers, software, and mechanical equipment
PHYSICAL
Validating Information Provided by the Sensors to the Unit Controllers
The Wall-Mounted E-BUS CO2 Sensor is used for monitoring CO2 levels and is designed for permanent wall mounting in the conditioned space. It connects to the VCCX or VCB-X Controller using an E-BUS Expansion Cable. The Sensor is supplied with electronics mounted in a cover plate, a back plate, an optional mounting plate, and two mounting screws. A cable assembly of required length (sold seperately). See list below.
Cable Assembly Part Numbers
· 1.5 ft Cable (G029440) · 3 ft Cable (G012870) · 10 ft Cable (G029460) · 25 ft Cable (G045270) · 50 ft Cable (G029510) · 75 ft Cable (G029530) · 100 ft Cable (G029450) · 150 ft Cable (G029470) · 250 ft Cable (V36590) · 1000 ft Cable (G018870)
Electrical and Environmental
Input Power
12-34 VDC
Operating Temperature 14°F to 122°F
Sample Method Sensitivity
Diffusion or Flowthrough 50-100 ml/min
< +/- 20 ppm
Analog Output
0-5 VDC
Power Consumption Operating Humidity Measurement Range
30 mW Max Average, 1.25 W Peak Power
5-95% RH Non-Condensing
0 to 2000 ppm
Resolution
+/- 1 ppm
Contact AAON Support for Technical Assistance www.aaon.com/contact
Dual E-BUS Connection Ports
INSTALLATION
Mounting
The Wall-Mounted E-BUS CO2 Space Sensor utilizes a sub-base mounting plate providing quick and easy mounting and wiring. The wall-mounted sensor’s sub-base is compatible with standard junction boxes. A locking screw secures the assembly to the wall.
The E-BUS CO2 Sensor needs to be installed in an environment that can maintain a temperature range between 14°F and 122°F and a humidity range between 5% and 95% RH (non-condensing).
Scan the code for additional product information
E-BUS_CO2_Space_Sensor_INSTL_20250630
Documents / Resources
 |
AAON ASM01829 Wall-Mounted E-BUS CO2 Space Sensor [pdf] Owner's Manual ASM01829 Wall-Mounted E-BUS CO2 Space Sensor, ASM01829, Wall-Mounted E-BUS CO2 Space Sensor, E-BUS CO2 Space Sensor, CO2 Space Sensor, Space Sensor, Sensor |