A-Plus A02 Bedside Table
Customer service email: info@i-aplus.com
PARTS LIST
Illustration of various parts labeled with numbers 1 through 14, along with a listing of hardware such as screws and tools required for assembly.
Specifications
| Hardware | Quantity | Size |
|---|---|---|
| A (Screw) | 36+2 sets | |
| B (Screw) | 14+2 pcs | φ8*30mm |
| C (Screw) | 16+2 pcs | φ3.5*14mm |
| D (Dowel) | 2 sets | 300mm |
| E (Cap) | 36+2 pcs | |
| F (Tool) | 1 pcs | |
| G (Bracket) | 1 set |
Assembly Instructions
Step 1
Attach part 2 to part 1 using 8 C screws and 4 D dowels.
Step 2
Connect parts 3 and 4 to part 2 using 4 A screws and 4 B screws.
Step 3
Secure part 5 to the assembly using 6 A screws.
Step 4
Attach part 6 to part 1 using 6 A screws and 6 B screws.
Step 5
Place part 7 on the top of the assembly.
Step 6
Secure part 8 to the assembly using 4 A screws and 4 B screws.
Step 7
Install G bracket to the underside of the assembly.
Step 8
Assemble drawer components 9, 10, 11, 12, 13, and 14 using 16 A screws, 8 C screws, and 4 D dowels.
Step 9
Insert drawers 13 and 14 into the assembly.
Step 10
Attach 36 E caps onto exposed screws for a finished appearance.
FAQ
- What should I do if I have missing or damaged parts?
-
- Contact customer service at info@i-aplus.com with details of the missing or damaged parts for assistance.
-
- Can I use power tools for assembly?
- It’s recommended to use the provided manual tools to avoid damaging the parts. If using power tools, ensure they are set to a low torque setting.
- Where can I find the instruction manual online?
- The instruction manual can typically be found on the manufacturer’s website or by contacting customer service.
- What is the best way to ensure the stability of the assembled furniture?
- Make sure all screws and dowels are tightly secured and periodically check them to ensure they remain tight over time.
Documents / Resources
 |
A-Plus A02 Bedside Table [pdf] Instruction Manual A02 Bedside Table, A02, Bedside Table |