FXi-10 / FXi-WP-10 Small Breeze Break
A&D Company, Limited
Features
The FXi-10/FXi-WP-10 protects the balance from the effects of a breeze and will provide more accurate weighing results.
An anti-static treatment has been applied to the breeze break components, therefore the weighing error of static electricity should not be a problem.
* The colors of the FXi-10 and the FXi-WP-10 are different, however the externals and the functions are common. (Refer to “2. Unpacking”)
Models : FX / FZ, FX-i, / FZ-i, FX-WP / FZ-W P, F X – i WP / FZ- i WP
Unpacking
* Parts colors
| FXi-10 | FXi-WP-10 | |
| -Base -Pillars -Cover |
White | Gray |
| -Plates | Transparent | |
Assembling
- Insert the pillars into the holes in the base.
- Rotate the pillars 90 degrees, and confirm that the position of the channels on the pillars and the base match up.
- Insert the plates in the channels between the pillars and aligned with the base.
- Confirm that both side projection of the base and both side channels on the balance fit together correctly. Install the breeze break on the balance.
- Place the cover on the breeze break.
Note (FX-i WP / FZ-i WP / FX-WP / FZ-WP series)
When cleaning the balance, remove the small breeze break.
Materials used (Material of the breeze break)
Acrylic (PMMA), Antistatic ABS
* Each part has the type of material used printed on it.
1WMPD4001388B
Documents / Resources
 |
A D FXi-10 Standard-Level Precision Balances [pdf] Instruction Manual FXi-10 Standard-Level Precision Balances, FXi-10, Standard-Level Precision Balances, Level Precision Balances, Precision Balances, Balances |