JJ Series Detector Switches
Specifications
- Contact Rating: 1mA, 5VDC Max.
- Contact Resistance: Max.
- Insulation Resistance: Min. 100VDC
- Dielectric Strength: Max.
- Operating Force:
- Travel:
- Operating Life:
- Operating Temperature: -10°C to 60°C
- Storage Temperature: -20°C to 70°C
Product Information
TE Connectivity introduces the JJ Series of Detector Switches
suitable for various applications such as automotive,
instrumentation, white goods, and telecommunications. The switches
are RoHS compliant, halogen and lead-free, providing a sharp
detection feeling in a compact size.
The JJ Series offers different body sizes ranging from 3.5×2.8
mm to 10.6×10.0 mm, catering to a wide range of mounting
possibilities including Gull-winged, J-leaded, and Through-Hole
options.
Product Usage Instructions
Applications
The Detector Switches can be used in automotive,
instrumentation, white goods, and telecommunications
applications.
How To Order
To order the JJ Series Detector Switches, refer to the Smart PN
list for specific part numbers based on orientation, grounding,
mounting height, circuit type, guide post, cover material, plating,
packaging, and minimum order quantity.
Features
The switches offer a sharp detection feeling and come in various
sizes to suit different applications. They are designed to meet
mechanical and electrical characteristics requirements.
Circuit
The switches are typically used as signal switches for electric
devices.
FAQ
What is the operating temperature range for the Detector
Switches?
The operating temperature range is -10°C to 60°C.
What is the shelf life of the product?
The shelf life of the product is within 6 months.
Are the Detector Switches RoHS compliant?
Yes, the Detector Switches are RoHS compliant.
JJF SERIES DETECTOR SWITCHES
Applications
JJ Series Detector Switches
Automotive
Instrumentation
White goods
Telecommunications
Benefits
RoHS Compliant
Halogen and Lead Free
Sharp detection feeling
Compact Size
TE Connectivity is pleased to introduce its JJ Series of Detector Switches, suitable for a wide variety of applications given their several presentations ranging from horizontal or vertical actuated options as well as Gull-winged, J-leaded and Through-Hole mounting possibilities.
The Detector Switches will be offered in a wide range of sizes giving the possibility for countless applications going from automotive to telecommunications.
JJ Series Family Classification
Series
JJA JJB JJC JJD JJE JJF JJG JJH JJI JJJ JJK JJL JJM JJN JJO JJP
Body Size
3.5×2.8 mm 3.5×2.98 mm 3.5×3.3 mm 4.2×3.6 mm 4.7×3.5 mm 4.7×3.8 mm 5.7×4.0 mm (High-Rating) 5.7×4.0 mm (Standard-Rating) 5.0×4.4 mm 6.0×4.85 mm / 5.5×4.7 mm 6.3×3.0 mm 6.5×3.9 mm 5.7×4.0 mm 5.7×4.0 mm (Wedge) 10.0×3.8 mm 10.6×10.0 mm
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
JJF Family 4.7×3.8 mm
Contact Rating Contact Resistance Insulation Resistance Dielectric Strength
Operating Force
Travel
Operating Life Operating Temperature Storage Temperature
1mA, 5VDC Max. Max. M Min. 100VDC
100VAC/1 minute 40gF Max. 5.30mm Stem–3.9mm 3.80mm Stem–2.6mm 100,000 cycles – °C to °C – °C to °C
Features
· Guiding post for easy orientation · 3.80 & 5.30mm stem height
Circuit
Applications
· DSC · Detection of disc loading
How To Order
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
Diagrams
-5.30mm
-3.80mm
PN List
Smart PN JJFV0UG530NOPMRTR JJFV0UG530NOPPRTR JJFV0UG530NONMRTR JJFV0UG530NONPRTR JJFV0UG380NOPMRTR JJFV0UG380NOPPRTR JJFV0UG380NONMRTR JJFV0UG380NONPRTR
Orientation
Vertical Push
Vertical Push
Vertical Push
Vertical Push
Vertical Push
Vertical Push
Vertical Push
Vertical Push
Grounding Ungrounded Ungrounded Ungrounded Ungrounded Ungrounded Ungrounded Ungrounded Ungrounded
Mounting Height
Gull-
5.30
winged mm
Gull-
5.30
winged mm
Gull-
5.30
winged mm
Gull-
5.30
winged mm
Gull-
3.80
winged mm
Gull-
3.80
winged mm
Gull-
3.80
winged mm
Gull-
3.80
winged mm
Circuit NO NO NO NO NO NO NO NO
Guide Post
Post
Post
No Post No Post
Post
Post
No Post No Post
Cover Metal Plastic Metal Plastic Metal Plastic Metal Plastic
Plating Packaging MOQ
TE PN
Tape
Silver
900 2331364-1
and Reel
Tape
Silver
900 2331365-1
and Reel
Tape
Silver
900 2331366-1
and Reel
Tape
Silver
900 2331367-1
and Reel
Tape
Silver
900 2331368-1
and Reel
Tape
Silver
1,000 2331369-1
and Reel
Tape
Silver
900 2331370-1
and Reel
Tape
Silver
1,000 2331372-1
and Reel
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
1. Style Detector “witches are mainly used as signal switches of electric devices, with the general requirements of mechanical and electrical characteristic. 1.1 Operating Temperature Range: -10 to 60 1.2 Storage Temperature Range: -20 to 70 1.3 The shelf life of product is within 6 months. 2. Current Range: 1mA, 5 VDC
3. Type of Actuation: Tactile feedback
4. Test Sequence: Item
Description
Test Conditions
Appearance
1
Visual Examination
Physical inspection without applying any external forces.
Requirements
There shall be no defects that affect the serviceability of the product.
Actuate the switch 4.35mm
2
Contact Resistance
(5.30mm Stem); 2.85mm (3.80mm Stem) and measure contact resistance using a
micro-Ohmmeter.
1 Max.
3 Electric Performance
4
Insulation Resistance
Measurements shall be made at 100 VDC potential between terminals and cover.
M Min.
Dielectric Withstanding
Voltage
100 VAC (50Hz or 60Hz) shall be applied across terminals and cover for 1 minute
There shall be no breakdown or flashover
5
Capacitance
Capacitance shall be measured at 1 MHz between terminals.
6
Operating Force
As the specification shows operating force is measured
5 pF Max.
40gF Max .4N Max
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
7
Contact (On) point
————————–
As the specification shows ON start position
Apply vertical static load of
8
Stop Strength
1KgF(9.8N) shall be applied in the direction of stem operation for a
As shown in items 2 through 7.
period of 60 seconds
Mechanical Performance
Durability
(See chart below)
1) Shall be free from
9
Solder Heat Resistance
ON starting before reflow:
5.30mm Stem
3.80mm Stem
pronounced backlash and falling-off or breakage terminals
+0.2
+0.2 2) As shown in items 2 through
5.00
-0.3
3.50
-0.3
8.
Test per Method 201A of MIL-STD-
202F
1) Swing distance=1.5mm
10
Vibration
2) Frequency: 10-55-10Hz in 1min/cycle.
As shown in items 2 through 8.
3) Direction: 3 vertical directions
including the directions of operation
4)Test time: 2 hours each direction
Test per Method 213B condition A of
MIL-STD-202F
1) Acceleration; 50G
11
Shock
2) Action time: 11±1m seconds
As shown in items 2 through 8.
3) Testing Direction: 6 sides
4) Test Cycle: 3 times in each
direction 1) Temperature: 245±3
Lead-Free solder: M705E JIS Z 3282 A No anti-soldering and the
12
Solderability
(Tin 96.5%, Silver 3%, Copper 0.5%) 2) Flux: 5-10 sec.
coverage of dipping into solder must more than 75%
3) Duration of solder
was requested.
Immersion: 3±0.5sec.
Measurements shall be made
following the test forth below:
13
Operating Life
1) 1mA,5 VDC resistive load 2) Apply a static load in the direction of operation equal to the operating force to the center of the stem. 3) Rate of Operation: 20 to 25 operations per minute.
1) As shown in items 4 to 5
2) Insulation Resistance: M Min.
3) Contact Resistance: 2 Max.
4) Cycle of Operation: 100,000 cycles
Min.
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
Weatherproof
Following the test set forth below
the sample shall be left in normal
14
Resistance Low Temperature
temperature and humidity conditions for 1 hour before the measurements are made:
1) Temperature: -40±2
2) Time: 96 hours
Following the test set forth below
the sample shall be left in normal
15
Heat Resistance
temperature and humidity conditions for 1 hour before the measurements are made:
1) Temperature: 85±2
2) Time: 96 hours
Following the test set forth below
the sample shall be left in normal
temperature and humidity
16
Humidity Resistance
conditions for 1 hour before the measurements are made:
1) Temperature: 40±2
2) Relative Humidity: 90 to 95%
3) Time: 96 hours
5. Soldering Conditions: Recommended Soldering Profile for the JJF Series
As shown in items 2 to 8.
1) As shown in items 4 to 8. 2) Insulation Resistance:
M Min.
The temperatures defined above are the temperatures measured on the surface of the Printed Circuit Board. There are cases where the printed circuit board’s temperature differs greatly from the temperature of the switch. Critical note: the switch’s surface temperature must not exceed 260.
Manual Soldering Soldering Temperature: 350 Max. Continuous Soldering Time: 5 second Max.
Precautions in Handling
1. Care must be taken to ensure excess flux on the top surface of the printed circuit board does not adhere to the switch. 2. Do not wash the switch.
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
JJF SERIES DETECTOR SWITCHES
Recommended storage conditions: Store the products in the original packaging material. After opening the package, the remaining products must be stored in the appropriate moisture-proof & airtight environment. Do not store the switch in the following environment or it may affect performance and solderability: 1. temperatures below -10° C to 40°C & humidity at 85% (min) 2. environment with corrosive gas 3. storage over 6 months 4. place in direct sunlight
2331364-1 Rev A 06/2018
Downloaded from Arrow.com.
Dimensions in millimetres unless otherwise specified
Dimensions Shown for reference purposes only. Specifications subject to change
For Email, phone or live chat, go to: www.te.com/help
Documents / Resources
 |
TE JJ Series Detector Switches [pdf] Instruction Manual JJFV0UG530NOPMRTR, JJFV0UG530NOPPRTR, JJFV0UG530NONMRTR, JJFV0UG530NONPRTR, JJFV0UG380NOPMRTR, JJFV0UG380NOPPRTR, JJFV0UG380NONMRTR, JJFV0UG380NONPRTR, JJ Series Detector Switches, JJ Series, Detector Switches, Switches |