Home › Mi › MI TV Stick User Guide

MI TV Stick User Guide

MI TV Stick

What’s in the box


Mi TV Stick	Voice Remote * 2 × AAA batteries required. Not included in box	Power Adapter

Installation guide

Plug Mi TV Stick into TV’s HDMI port
Plug the power adapter into a socket
Switch your TV to HDMI source accordingly in TV settings

Input / Source button on TV
Set-up Mi TV Stick and connect to Wi-Fi networking
Enjoy streaming content from your favourite apps

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, Digital Surround, and the DTS 2.0+Digital Out logo, are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz

Documents / Resources

TV Stick

User Guide · TV Stick 1080P streaming player

References

Beryko.czwww.beryko.cz
User Manualmanual.tools

Published: July 12, 2021

Updated: July 16, 2021

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Franci says:

August 26, 2021 at 3:30 pm
possible to know the functions of the symbols of the remote control?
possibile sapere le funzioni dei simboli del telecomando?
Franci asks possible to know the functions of the symbols of the remote control?
possibile sapere le funzioni dei simboli del telecomando?

Manuals+ clarified question

Question

What are the functions of the symbols on the Mi TV Stick remote control?
Answer

Based on the Mi TV Stick user guide, here are the functions for the symbols found on the Voice Remote:

Power Button (Top): Turns the Mi TV Stick on or off.

Google Assistant Button (Colorful circle/dots): Activates voice search and commands.

Directional Pad (Large ring): Used for navigating menus (Up, Down, Left, Right).

Center Button (Inside the ring): Confirms a selection or 'OK'.

Back Button (Left arrow): Returns to the previous screen.

Home Button (Circle): Returns to the Android TV home screen.

Apps/PatchWall Button (Grid of squares): Opens the apps menu or PatchWall interface.

Netflix & Prime Video Buttons: Dedicated shortcut buttons to launch these specific streaming services.

Volume +/- Button (Long vertical bar): Increases or decreases the audio volume.
Read the full Q&A page
Reply
CHAUVET says:

October 3, 2021 at 4:15 pm
How do I remove the voice assistant that is interfering with the reception of my programs?
Comment enlever l’assistant vocal qui perturbe la réception de mes programmes ?

CHAUVET asks How do I remove the voice assistant that is interfering with the reception of my programs?<e/em>
Comment enlever l’assistant vocal qui perturbe la réception de mes programmes ?

Manuals+ clarified question

Question

How do I disable the voice assistant or TalkBack feature on the Mi TV Stick?

Answer

If you are hearing a voice describing everything on the screen (TalkBack/Screen Reader) or if the Google Assistant is interrupting your programs, you can adjust these settings on your Mi TV Stick:

To disable the Screen Reader (TalkBack): Go to Settings (gear icon) > Device Preferences > Accessibility. Find TalkBack or Screen Reader and toggle it to Off.

To manage Google Assistant: The voice assistant is typically only active when the dedicated Google Assistant button on your remote is pressed. If it is triggering accidentally, ensure the remote buttons are not stuck.

To disable the 'OK Google' detection: Go to Settings > Device Preferences > Google Assistant and turn off the hands-free 'OK Google' detection if your specific TV model supports it.

Note: Since the Mi TV Stick uses a standard Android TV interface, these settings are located within the system menu rather than the physical hardware.

Read the full Q&A page
Reply
martin says:

November 17, 2021 at 10:12 am
I would like to know all the functions in detail of the stick so that it is easier to use and handle
j’aimerais savoir toutes les fonctions en détail du stick pour qu’il soit plus facile d’utilisation et de manipulation

martin asks I would like to know all the functions in detail of the stick so that it is easier to use and handle<e/em>
j'aimerais savoir toutes les fonctions en détail du stick pour qu'il soit plus facile d'utilisation et de manipulation

Manuals+ clarified question

Question

What are the detailed functions and features of the Mi TV Stick?

Answer

The Mi TV Stick is a 1080P streaming player designed to turn any television with an HDMI port into a smart TV. Based on the user guide, here are its primary functions and setup details:

Streaming Content: Its main function is to stream content from your favorite apps (such as Netflix and Prime Video) directly to your TV.

Voice Control: The included Voice Remote allows you to navigate the interface and search for content using voice commands.

Audio Support: The device supports high-quality audio technologies, including Dolby Audio and DTS 2.0+Digital Out.

Connectivity: It connects to your home network via Wi-Fi to access online services.

Basic Handling & Setup:

Plug the Mi TV Stick into your TV's HDMI port.

Connect the included power adapter to a wall socket and the stick.

Switch your TV input to the corresponding HDMI source.

Follow the on-screen prompts to connect to Wi-Fi and sign in to your accounts.

Note: The remote requires 2 x AAA batteries, which are typically not included in the box.

Read the full Q&A page
Reply
Celal Yılmaz says:

December 25, 2021 at 9:23 am
I bought a new remote for mi stick, how do i pair it?
Mi stick için yeni bir kumanda aldım, nasıl eşleştireceğim?

Celal Yılmaz asks I bought a new remote for mi stick, how do i pair it?<e/em>
Mi stick için yeni bir kumanda aldım, nasıl eşleştireceğim?

Manuals+ clarified question

Question

How do I pair a new remote with the Mi TV Stick?

Answer

To pair a new remote with your Mi TV Stick, please follow these steps:

Ensure the Mi TV Stick is powered on and connected to your TV.

Hold the remote approximately 20 cm away from the Mi TV Stick.

Press and hold the App button (the button with the square/dots icon) and the Home button (the button with the circle icon) simultaneously for several seconds.

Release the buttons once you hear a beep or see a pairing success message on your TV screen.

Note: If the pairing fails, ensure you have inserted fresh AAA batteries into the remote and try moving closer to the device.

Read the full Q&A page
Reply
Juha Holma says:

December 28, 2021 at 11:38 am
If you connect a stick to a screen only, how do you get sound from it?
Jos stickin yhdistää pelkkään näyttöön, miten siihen saadaan ääni?

Juha Holma asks If you connect a stick to a screen only, how do you get sound from it?<e/em>
Jos stickin yhdistää pelkkään näyttöön, miten siihen saadaan ääni?

Manuals+ clarified question

Question

How do I get sound from the Mi TV Stick if it is connected to a screen without built-in speakers?

Answer

If you connect the Mi TV Stick to a monitor or screen that does not have built-in speakers, you can obtain sound using the following methods:

Bluetooth Audio: The Mi TV Stick supports Bluetooth. You can pair Bluetooth headphones, a Bluetooth soundbar, or Bluetooth speakers directly to the stick by going to Settings > Remotes & Accessories > Add accessory.

Monitor Audio Out: If your screen has a 3.5mm audio jack or optical output, you can plug external speakers or headphones directly into the monitor, as the HDMI connection carries both video and audio signals from the stick to the screen.

HDMI Audio Extractor: You can use an external HDMI audio extractor device. This sits between the Mi TV Stick and your screen, splitting the HDMI signal into video (for the screen) and separate audio (via RCA, Optical, or 3.5mm) for your sound system.

Read the full Q&A page
Reply
Zimasa says:

April 9, 2022 at 10:12 am
I connected my TV stick on hdmi2/1 slot selected it on sacrce aswell. I’m not sure if I should connect to wifi but it does same thing over & over. My screen doesn’t give anything else other than going blank and show Androidtv.
Secondly how do I see if my remote is functioning there’s no light to see if it’s working or not. I got stuck
Zimasa asks I connected my TV stick on hdmi2/1 slot selected it on sacrce aswell. I'm not sure if I should connect to wifi but it does same thing over & over. My screen doesn't give anything else other than going blank and show Androidtv.
Secondly how do I see if my remote is functioning there's no light to see if it's working or not. I got stuck

Manuals+ clarified question

Question

Why is my Mi TV Stick screen blank or stuck on the Android TV logo, and how can I tell if the remote is working?
Answer

Based on the Mi TV Stick User Guide and common troubleshooting for this device, please follow these steps:

Power Supply: Ensure you are using the included Power Adapter plugged directly into a wall socket as shown in the installation guide. Powering the stick via a TV's USB port often provides insufficient voltage, which can cause the device to hang on the "Android TV" logo or go blank.

Remote Functionality: The Mi TV Stick remote does not have a visible LED light. To check if it is working:

Ensure you have installed 2 x AAA batteries (not included in the box).

Try the "Camera Test": Point the front of the remote at your smartphone's camera lens while looking at your phone screen. Press any button; if the remote is sending a signal, you should see a faint flickering light through the camera view.

Initial Setup: You must connect to Wi-Fi to complete the setup process. If the screen remains blank after checking power, try a different HDMI port or ensure the stick is fully seated in the port.

Boot Loop: If the device continues to show only the logo, try a hard reset by unplugging the power adapter, waiting 30 seconds, and plugging it back in.
Read the full Q&A page
Reply
wil says:

May 27, 2022 at 1:58 pm

Hey everyone
how can I connect the MI tv stick to my laptop or rather
how can i get a picture
on a TV it was no problem and the apps on the mi don’t install either, but I can’t watch through the screen of my laptop
laptop is from HP

would love to hear a solution for this
Kind regards.
will
Dag allemaal
hoe kan ik de MI tv stick op mijn laptop aansluiten of liever gezegd
hoe kan ik beeld krijgen ??
op een tv was het geen probleem en de apps op de mi installeren ook niet maar kijken via het scherm van mijn laptop lukt mij niet
laptop is van HP

hooor graag een oplossing hier voor
met vriendelijke groet.
will

wil asks Hey everyone
how can I connect the MI tv stick to my laptop or rather
how can i get a picture
on a TV it was no problem and the apps on the mi don't install either, but I can't watch through the screen of my laptop
laptop is from HP

would love to hear a solution for this
Kind regards.
will<e/em>
Dag allemaal
hoe kan ik de MI tv stick op mijn laptop aansluiten of liever gezegd
hoe kan ik beeld krijgen ??
op een tv was het geen probleem en de apps op de mi installeren ook niet maar kijken via het scherm van mijn laptop lukt mij niet
laptop is van HP

hooor graag een oplossing hier voor
met vriendelijke groet.
will

Manuals+ clarified question

Question

How can I connect the MI TV Stick to my laptop to use the laptop screen as a display?

Answer

Connecting the MI TV Stick directly to a laptop's HDMI port usually does not work because most laptops (including HP models) only have HDMI-out ports. These ports are designed to send a signal to an external monitor or TV, not to receive a signal from an external device like the MI TV Stick.

To view the MI TV Stick on your laptop screen, you would typically need a USB HDMI Video Capture Card. This device plugs into your laptop's USB port and allows you to plug the MI TV Stick into the capture card's HDMI input. You would then use software (such as OBS Studio or the Windows 'Camera' app) to view the video feed.

If you are trying to install apps and they are failing, ensure the device is properly powered using the included Power Adapter plugged into a wall socket, as a laptop's USB port may not provide enough power for the stick to function correctly during app installations.

Read the full Q&A page

Reply
Mustafa says:

May 1, 2023 at 7:58 am
The user manual is very simple, there are no details. It would be nice to explain the exact functions of the keys on the remote. Can you give details about that?
Kullanım kılavuzu çok basit hazırlanmış, hiç detay yok. Kumanda üzerindeki tuşların tam fonksiyonlarının açıklanması iyi olurdu. Bununla ilgili detay verebilir misiniz.

Mustafa asks The user manual is very simple, there are no details. It would be nice to explain the exact functions of the keys on the remote. Can you give details about that?
Kullanım kılavuzu çok basit hazırlanmış, hiç detay yok. Kumanda üzerindeki tuşların tam fonksiyonlarının açıklanması iyi olurdu. Bununla ilgili detay verebilir misiniz.

Manuals+ clarified question

Question

What are the functions of the buttons on the Mi TV Stick remote?

Answer

While the provided manual image shows the layout of the Voice Remote, it does not explicitly list text descriptions for every button. Based on the standard Mi TV Stick remote design shown in the guide, here are the functions of the keys:

Power (Top Left): Turns the Mi TV Stick on or off.

Google Assistant (Top Center): Activates the microphone for voice commands.

Directional Pad (Circle): Allows you to navigate up, down, left, and right through menus.

Center Button (Inside Circle): Confirms a selection or 'OK'.

Back (Left Arrow): Returns to the previous screen.

Home (Circle Icon): Returns to the Android TV home screen.

Apps (Grid Icon): Opens the installed applications menu.

Netflix / Prime Video: Dedicated shortcut buttons to launch these specific streaming services.

Volume +/-: Increases or decreases the audio volume.

Note: The remote requires 2 x AAA batteries which are not included in the box.

Read the full Q&A page
Reply
Ody says:

July 23, 2024 at 8:10 pm
mi stick was updated last fri when their was a glitch after that i cannot use it keeps on restarting. Is it already done to be used.
Ody asks mi stick was updated last fri when their was a glitch after that i cannot use it keeps on restarting. Is it already done to be used.

Manuals+ clarified question

Question

Why is my Mi TV Stick stuck in a restart loop after a recent update?
Answer

If your Mi TV Stick is stuck in a restart loop after a software update, it may be due to a corrupted update or insufficient power. Please try the following troubleshooting steps:

Check Power Supply: Ensure you are using the original power adapter and cable included in the box. Plugging the USB cable directly into the TV's USB port often provides insufficient power, which can cause restart loops during or after updates.

Perform a Hard Reset: If the device allows you to reach the home screen briefly, go to Settings > Device Preferences > Reset.

Recovery Mode: If you cannot access the menu, you can try to enter Recovery Mode. Unplug the power, then while holding the OK and Back buttons on the remote, plug the power back in. If the recovery menu appears, select Wipe data/factory reset.

If the device continues to restart and you cannot access the recovery menu, the firmware may be permanently corrupted, and you should contact the retailer or Xiaomi support for warranty assistance.
Read the full Q&A page
Reply
Rocio Garcia says:

September 1, 2024 at 6:02 am
el aparato tiene codigo pin pero se activo el Talk back y no me deja introducir el código pin
Rocio Garcia asks el aparato tiene codigo pin pero se activo el Talk back y no me deja introducir el código pin

Manuals+ clarified question

Question

How do I disable TalkBack on the Mi TV Stick to enter my PIN code?
Answer

When TalkBack is enabled on the Mi TV Stick, the navigation method changes. To enter your PIN or navigate the menus, you must use the following gestures with your remote:

Selection: Instead of a single click, you must double-tap the center (OK) button to select a number or item.

Navigation: Use the directional ring to move the focus box to the desired number, then double-tap to confirm.

To disable TalkBack once you have access, or to try a shortcut:

Shortcut: On many Android TV devices, you can press and hold both the Volume Up and Volume Down buttons on the remote simultaneously for 3 seconds to toggle TalkBack off.

Settings Menu: If the shortcut does not work, navigate to Settings (gear icon) > Device Preferences > Accessibility > TalkBack and switch it to Off. Remember to double-tap to select each option while TalkBack is active.
Read the full Q&A page
Reply
Zlatko čaić says:

March 28, 2025 at 2:44 pm
Kako da na tv marke TECHWOOD preko stika dobijem tv kanale a Internet je spojen
Zlatko čaić asks Kako da na tv marke TECHWOOD preko stika dobijem tv kanale a Internet je spojen

Manuals+ clarified question

Question

How can I watch TV channels on a Techwood TV using the Mi TV Stick when the internet is already connected?
Answer

To watch TV channels on your Mi TV Stick, you must use streaming applications, as the stick does not use a traditional antenna. Since your internet is already connected, follow these steps:

Install TV Apps: Go to the Google Play Store on your Mi TV Stick home screen. Search for and install live TV apps available in your region (such as Pluto TV, Rakuten TV, or local provider apps like HRTi, EON, or similar).

Use 'Live' Tab: Some versions of the Android TV interface have a 'Live' tab at the top of the home screen that aggregates free channels from installed apps.

IPTV Providers: If you have a subscription from an internet service provider, download their specific app from the Play Store and log in with your credentials.

YouTube: Many news and local channels stream live for free on YouTube, which is pre-installed on your device.

Note: Ensure your Techwood TV is set to the correct HDMI source where the Mi TV Stick is plugged in to see the interface.
Read the full Q&A page
Reply
Αρχοντής Παπαποστόλου says:

May 16, 2025 at 12:53 pm
Τρόπος λειτουργείας τηλεχειριστηρίου ΑΝΑΛΥΤΙΚΑ.
Σας παρακαλώ ενημερώστε με , αν έχετε την καλοσύνη, τον τρόπο με τον οποίον θα χειριστώ το Mi TV Stick, με το οποίο συνδέθηκα στην τηλεόρασή μου μάρκας SONY.
Αρχοντής Παπαποστόλου asks Τρόπος λειτουργείας τηλεχειριστηρίου ΑΝΑΛΥΤΙΚΑ.
Σας παρακαλώ ενημερώστε με , αν έχετε την καλοσύνη, τον τρόπο με τον οποίον θα χειριστώ το Mi TV Stick, με το οποίο συνδέθηκα στην τηλεόρασή μου μάρκας SONY.

Manuals+ clarified question

Question

How do I operate the Mi TV Stick remote control and use it with my Sony TV?
Answer

To operate your Mi TV Stick with your Sony TV, follow these steps based on the user guide:

Remote Preparation: The Voice Remote requires 2 x AAA batteries (not included). Ensure these are installed correctly.

Physical Connection: Plug the Mi TV Stick directly into one of your Sony TV's HDMI ports.

Power: Connect the included power adapter to a wall socket and then to the Mi TV Stick.

TV Configuration: Use your Sony TV remote to press the Input or Source button and select the HDMI port where the Mi TV Stick is plugged in.

Remote Pairing & Setup: Once the Mi TV Stick logo appears on the screen, follow the on-screen instructions to pair the Bluetooth remote (usually by holding specific buttons near the device) and connect to your Wi-Fi network.

The remote features a directional pad for navigation, a center button for selection, a Back button, a Home button, and dedicated buttons for Netflix and Prime Video. You can also use the Google Assistant button for voice commands.
Read the full Q&A page
Reply
khaled says:

August 18, 2025 at 8:59 am
please i have MI tv model L43M3-AA the problem is no data on this tv a data is deleted only, show http://www.mi .com now i want data to load to this tv please send to my email address a data for this tv thanks
khaled asks please i have MI tv model L43M3-AA the problem is no data on this tv a data is deleted only, show www.mi .com now i want data to load to this tv please send to my email address a data for this tv thanks

Manuals+ clarified question

Question

How do I restore firmware or data on a Mi TV model L43M3-AA that only shows the mi.com logo?
Answer

It appears your Mi TV (Model L43M3-AA) is stuck on the boot screen, which often indicates a firmware issue or corrupted system data. Please note that the manual provided here is for the Mi TV Stick, which is a separate plug-in streaming device, rather than the built-in software for your specific TV model.

To resolve a TV stuck on the logo screen, you can try a hard reset using the physical buttons on the TV (usually located at the bottom or back):

Unplug the TV from the power outlet.

Press and hold the Power and Select/OK buttons on the TV (or the remote, depending on the specific hardware version).

While holding the buttons, plug the TV back into the power.

If successful, the TV should enter Recovery Mode. From there, you can select 'Wipe data/factory reset'.

Regarding your request for firmware files, we do not provide software downloads via email. For official firmware specific to model L43M3-AA, we recommend contacting Xiaomi Global Support or visiting their official website, as installing incorrect firmware can permanently damage your television.
Read the full Q&A page
Reply