LG TV Remote Control Functions: Magic Remote Owner’s Manual

The LG Magic Remote (model AN-MR19BA) does not have a dedicated button labeled 'Teletext'. However, you can typically access this function using one of the following methods, depending on your TV model and region:

• Press and hold the DASH button: The manual states that pressing and holding the - (DASH) button for more than one second will 'Enter data broadcast'. Since Teletext is a data broadcast service, this is the most likely way to access it.
• Use the MORE ACTIONS button: Press the ... (MORE ACTIONS) button. This displays additional remote control functions on your TV screen. A 'Teletext' option may appear in this on-screen menu.

Please be aware that the availability of the data broadcast feature can vary by country.

Hello, if the voice recognition feature on your LG Magic Remote is not working, here are a few troubleshooting steps you can try based on the owner's manual:

1. Check Network Connection: The manual states that a network connection is required for the voice recognition function to work. Please ensure your LG TV is properly connected to the internet.
2. Replace the Batteries: Low battery power can sometimes cause advanced features like the microphone to fail while basic button presses still work. The manual notes that the Magic Remote depletes batteries faster than a normal remote. Please replace the existing batteries with a fresh pair of AA alkaline batteries.
3. Re-register (Re-pair) the Remote: The connection between your remote and the TV may need to be reset. You can do this by unpairing and then re-pairing the remote.
   • To unpair: Press and hold the HOME and BACK buttons at the same time for five seconds.
   • To re-pair: After unpairing, point the remote at your TV and press the Wheel (OK) button to register it again.

   Alternatively, the manual mentions that pressing and holding the GUIDE button will let you cancel and re-register the Magic Remote at once.

If these steps do not resolve the issue, there may be a hardware problem with the remote's microphone.

To control your LG TV and HU810 projector independently, you must pair each Magic Remote specifically to its respective device. By default, the Power button on these remotes uses infrared (IR), which can trigger any nearby LG device. However, once a remote is paired via Bluetooth to a specific device, the other functions will be localized.

Follow these steps to register (pair) each remote to its specific device:

1. Turn on the first device (e.g., the TV) and ensure the other device is off or its sensor is covered.
2. Point the first Magic Remote at the TV and press the Wheel (OK) button. A message should appear on the screen indicating registration is complete.
3. Repeat this process for the second device (HU810) using the second remote.

If the remotes are already cross-talking, you may need to deregister them first:

• Press and hold the Home and Back buttons simultaneously for five seconds to unpair the remote.
• Once unpaired, follow the registration steps above to pair it to the correct device.

Note: Because the Power button often uses a universal LG IR code, you may still find that one remote turns both devices on if they are in close proximity. To prevent this, you may need to physically space the devices further apart or slightly obscure the IR receiver on one of the devices so it only receives signals from a specific angle.

Hello! You can control media playback and schedule recordings using specific buttons on your LG Magic Remote. Here’s how:

• To Pause a Film: While watching a film or other media, press the Pause (||) button. This button is part of the media control buttons, which also include the Play (▷) button. According to the manual (page 5), these are labeled as "Control buttons" and are used to control media content.
• To Schedule Recordings: The ability to record depends on your TV model and country. The manual (page 5) indicates a button with a red dot (●) that "Runs the record function". To schedule a recording, you would typically follow these steps:
  1. Press the GUIDE button on your remote to open the on-screen programme guide.
  2. Navigate to the future programme you wish to record.
  3. Select the programme.
  4. Press the Record (●) button on your remote or select the record option from the on-screen menu.

  Please note that the exact on-screen steps for scheduling might vary slightly depending on your TV's software.

Based on the LG Magic Remote Owner's Manual, there is no built-in feature to reassign or remap the Wheel (OK) button's 'Enter' functionality to a different physical key on the remote. The manual specifies that the center of the wheel is the dedicated button to select menus.

However, you may find these alternatives helpful to avoid accidental rotation:

• Use the Pointer: Instead of relying solely on the wheel, you can shake the remote to activate the on-screen pointer. Once the pointer is over your desired selection, a quick, firm press on the center of the wheel may be easier to execute without rotating it than navigating through lists manually.
• Directional Keys: You can use the Up/Down/Left/Right buttons surrounding the wheel to navigate menus. While you still must press the wheel to 'Enter', using the arrows for navigation first can reduce the time your thumb spends resting on the wheel.
• Quick Access: For frequently used apps or channels, you can use the QUICK ACCESS feature. By long-pressing the number buttons (0-9), you can jump directly to a specific service without navigating through menus where the wheel is required.

To pause content on Netflix (or other media applications) using the LG Magic Remote, you can use the following methods:

• Control Buttons: Press the Pause (||) button located at the bottom of the remote. This button is part of the dedicated media control section designed to manage playback.
• Wheel (OK) Button: While a video is playing, you can often press the center of the Wheel (OK) button to bring up the on-screen transport controls and select the pause icon.
• Pointer: Shake the remote to make the pointer appear, then click on the pause icon displayed on the Netflix interface.

Note: If your specific remote model lacks physical play/pause buttons, you should use the Wheel (OK) button or the More Actions (...) button to access on-screen playback controls.

To use your LG Magic Remote with your DVD player, you primarily need to use the INPUT button to switch the TV to the correct source. Follow these steps:

• Switching Inputs: Press the (INPUT) button (the icon looks like a plug) on your remote to cycle through the available sources until you see your DVD player's screen.
• Home Dashboard: You can also press and hold the (INPUT) button to access the Home Dashboard, where you can select connected devices more easily.
• Universal Control: To control the DVD player's functions (like Play/Pause) with the Magic Remote, you may need to set it up as a universal remote. Press the (MORE ACTIONS) button (three vertical dots) on the remote while on the DVD input to see if additional control options appear.
• Control Buttons: Once the DVD is playing, you can use the (Control buttons) at the bottom of the remote to play or pause media.

If you are having trouble seeing the pointer on the screen to select menus, shake the remote slightly to the left and right to make it appear.

To find or change the input source on your LG TV using the Magic Remote, use the INPUT button (represented by an icon of a plug/cable). Here are the specific functions for that key:

• Press the (INPUT) button: This will display the list of available input sources on your screen, allowing you to see which one is currently active and switch to another.
• Press and hold the (INPUT) button: This will access the HOME DASHBOARD, which provides a comprehensive overview of all connected devices and inputs.

If you need to make the pointer appear on the screen to select a source, you can shake the Magic Remote slightly to the right and left or press the HOME, INPUT, or Q. Settings buttons.

Yes, scheduled recordings on LG TVs are designed to function even if the television is turned off (in standby mode) using the remote control. The TV's internal system remains active enough to trigger the recording at the scheduled time, provided the TV remains connected to a power source and any required external storage (like a USB drive) is plugged in.

While the Magic Remote manual focuses on button functions and pairing, the recording feature itself is a function of the TV's webOS software. You can verify your recording status by accessing the Recordings or Schedule List menu on your TV. Note that the recording function availability may vary depending on your country and service provider.

Disclosed uncertainty: Specific behavior can vary by TV model year; ensure your external hard drive (if used) does not have its own power-save mode that prevents it from waking up.

According to the LG Magic Remote Owner's Manual, there are several reasons why the pointer may disappear or stop responding correctly. Please try the following steps to resolve the issue without needing to restart your TV:

• Shake the Remote: To make the pointer appear on the screen again, shake the Magic Remote slightly to the left and right.
• Use Specific Buttons: Pressing the HOME, INPUT, or Q. Settings buttons can also force the pointer to reappear.
• Reset the Pointer: If the pointer is not responding smoothly or is acting up, you can reset it by moving it to the extreme edge of the screen.
• Check for Interference: The manual notes that communication failures can occur if a wireless router (AP) is within 0.2 meters of the TV or if other devices like microwave ovens are operating on the 2.4 GHz band nearby.
• Re-register the Remote: If the issue persists, you can re-register the remote by pressing and holding the GUIDE button for 5 seconds to cancel and re-register the Magic Remote at once.

Note: The pointer is designed to disappear automatically if it has not been used for a certain period of time or if the remote is placed on a flat surface.