LG DSP2 Sound Bar Owner’s Manual

What In The Box

Wiring Connection

Replacement of Battery

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

1. Sound bar
2. Remote Control Receiver / Status LED (Refer to below table)
3. External Device – (Blu-ray player, game console, etc.)

Power on	Standby	OPTICAL / HDMI ARC	Bluetooth ready	Bluetooth	LG TV	HDMI IN	USB
Red blinking	Red	White	Blue blinking	Blue	White	White	Green

1. Connect the sound bar to your TV via an optical cable or an HDMI cable.
2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
3. Using the product with your TV
   1. Press the Function button repeatedly until the first from above LED lights up in white among the three LEDs.
   2. On your TV’s settings, set the output speaker to [HDMI ARC],[Optical], or [External Speaker].
4. Connecting the product to your smartphone via Bluetooth
   1. Tap the Settings button on your smartphone and select  Bluetooth.
      Turn on the Bluetooth function. ( Off > On)
   2. Press the Bluetooth pair button. After a moment, the second LED lights up in blue and blinking among the three LEDs.
   3. Find and tap the product on your smartphone. The product appears as “LG DSP2 (XX)”.
5. Connecting to the LG Sound Bar app
   1. Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
   2. You can get more information regarding its use by selecting [Help] in  [Setting].

• Design and specifications are subject to change without notice.
• Google Play is a trademark of Google LLC

Specification

Power requirements

• Refer to the main label.

Power consumption

• Refer to the main label.
• Networked standby : 1.5 W (If all network ports are activated.)
  Dimensions (W x H x D): Approx. 760.0 mm x 63.0 mm x 90.0 mm
  Bus Power Supply (USB): 5 V 500 mA
  Amplifier (Total RMS Output power): 100 W RMS

How to disconnect the wireless network connection or the wireless device
Set up the Auto power function to off by the app and turn off the product.

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type SOUND BAR is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

Frequency range	Output power (Max.)
2402 to 2480 MHz	10 dBm

Documents / Resources

LG DSP2 Sound Bar [pdf] Owner's Manual DSP2, Sound Bar

References

• User Manual