HP OP2000 Smart Projector Instruction Manual

HP OP2000 Smart Projector

Package Contents:

• Power Adapter *1
• Power Cord *1
• Remote Control *1
• Quick Start Guide *1
• Warranty Card *1
• Product Notice *1
• Optical Engine Cleaning Kit *1

Product I/F

Remote Control

Usage Tips

• Power Operation
  Power On: Press the power key to turn on the OP2000. Power Off: While the projector is operating, press the power key again to shut it down.
• Focus Adjustment
  For a sharp and vivid display, adjust the focus before use. Use the [FOCUS (+)] and [FOCUS (-)] buttons on the remote control to fine-tune. A focus icon will appear on
• the screen—adjust until you achieve the desired clarity. In addition, the OP2000 features an autofocus function that automatically adjusts the image. You can enable or disable it by navigating to: Settings > Projection > Auto Focus
• Helpful Tips for Focus
  The recommended projection distance for the OP2000 is 1.1 m to 3.0 m (3.6 ft to 9.8 ft. ), measured from the projector to the screen.
• Optical System Cleaning
  If spots or blemishes appear on the image, they may be caused by dust inside the optical system. Follow the instructions to open the optical module cover, then use the provided cotton swab from the cleaning kit to gently clean the optical system.

1. Open the optical module cover.
2. Use the provided cotton swab to gently clean the optical system.
3.  Reinstall the optical module cover after cleaning.

• Initial Setup
  On first use, follow the on-screen instructions to pair the Bluetooth remote control, select your preferred language and location, connect to Wi-Fi, and enable Voice Assistant if desired.
• Bluetooth Remote Pairing
  If you skipped Bluetooth remote pairing during the initial setup, or if you need to pair the remote again, follow these steps:
  On the homepage, click the Setting icon→ Bluetooth . Search for available Bluetooth devices, then select and pair the device you want to connect.
• Wi-Fi Setup and Connection
  If Wi-Fi setup was skipped during the initial setup, you can configure it later: On the home screen, select the Settings icon→ Network > Wi-Fi > Connect to Network. Choose an available Wi-Fi network and enter the password to connect.
• Language Selection
  The language you select during the initial setup will be applied to the projector’s interface and automatically linked to the voice input language. If you want to change the display language, go to Settings > System Setting > Language. Please note that changing the interface language will also update the linked voice input language.
  

If you need to use a voice input language that is different from the interface language, go to Setting > Voice Service > Language to adjust it.

Copyright Acknowledgment
Upon completion of the initial setup, a copyright and license acknowledgment will be displayed on the screen. Please read and accept these terms before using the device

Smart Projector
Tou is a collaborative alliance project jointly launched by chip manufacturers, Whole OS software developers, brand owners, manufacturers, and content providers. The project ensures that all content is properly licensed and legally authorized.

Getting Started

The OP2000 Bluetooth remote control not only includes the OK button and directional keys (up, down, left, right), but also provides shortcut keys for common functions such as voice input, Bluetooth speaker, Netflix, YouTube, Disney+, and Prime Video. With these shortcuts, you can easily launch the corresponding apps. With Netflix, YouTube, Disney+, and Prime Video, you can browse a vast library of audiovisual content, or download more apps from the App Store.

You can also use the built-in voice input function to control the projector and interact with AI. In addition, you can mirror your smartphone wirelessly, connect a computer or DVD player via HDMI, or play multimedia files directly from a USB drive. Moreover, the OP2000 can also function as a Bluetooth speaker.

Interaction with AI
To control the projector using voice input and interact with the built-in AI, please ensure the projector is connected to Wi-Fi and the Bluetooth remote control is successfully paired with the projector.
Press the “Voice Input” button on the Bluetooth remote control to activate AI conversation mode.

Go to Setting > Voice Service > Language to select your preferred input language and choose the AI response voice.

You can also interact with AI via keyboard input.

Browse Built-in Apps
The OP2000 comes with popular apps such as Netflix, YouTube, Disney+, and

Prime Video pre-installed. Simply select and install the desired app to enjoy a wide variety of audiovisual entertainment.

Screen Mirroring/Wi-Fi Projection
Important Note: Please ensure that your OP2000 projector and casting device are connected to the same Wi-Fi network before proceeding.

iOS Direct Casting – AirPlay Mirroring.

1. Open Control Center on your iOS device.
2. Select the projector name from the available devices.
3.  Tap “Screen Mirroring.”

Casting via the TranScreen App – Windows / iOS / Android Press the Screen Cast button on the Bluetooth remote control, or open the TranScreen app from the projector’s home screen, then follow the on-screen instructions.

• For Windows computers: Refer to the “Computer Software Casting” guide. Download and install the TranScreen app on your computer.
• Open the app and select OP2000 to begin casting. mobile phones: Refer to the “Phone Casting” guide. Scan the QR code to download and install the TranScreen app on your phone. Open the app and select OP2000 to begin casting..
• Split-Screen Function: The OP2000 supports simultaneous casting from up to two devices..

HDMI
Connect your device, such as a notebook or DVD player, to the projector with an HDMI cable to enjoy a larger display.

Bluetooth Speaker Mode
Find the Bluetooth speaker icon in the APP List or press the Bluetooth speaker button on the Bluetooth Remote Control to enter Bluetooth speaker mode. On your device, search for the projector’s name, then pair and connect. Tap Turn Off Screen to switch off the projection display and press the Back button to exit the screen-off state.

Setting
On the home screen, you can easily access settings for network, Bluetooth, image, and sound.

Advanced Settings
Press the Settings button to open more advanced options. In System Settings, you can select language, voice input, date and time, screen saver, restart system, and more. In Projector Settings, you can adjust projection direction, focus, keystone correction, and other options.

Enjoy your OP2000

Safety and Usage Instructions

Read carefully before use and keep for future reference.
Keep the device and packaging materials out of reach of infants and children.

1. Power: Use only the original or approved power adapter and cables.
2. Environment: Keep away from moisture, high temperatures, excessive dust, and open flames. Do not expose to rain.
3. Ventilation: Keep ventilation openings clear with at least 10 cm clearance on all sides to prevent overheating.
4. Operation: Do not use during thunderstorms. Avoid shock, impact, or dropping.
5. Maintenance: Do not open, repair, or modify the projector yourself; servicing should be performed by qualified personnel.
6. Abnormalities: If you notice unusual odor, smoke, or noise, turn off and unplug immediately.
7. Operating Conditions: Use only in 5 °C-35 °C, 20%-80% RH (non-condensing) environments.
8. Eye Safety: Do not look directly into the lens or light beam.
9. Normal Heat: The projector may become warm during use; this is normal.
10.  Hearing Protection: Keep volume at a safe level to protect hearing.

Regulatory Statement

Wireless & Safety Regulatory Notice

• This device supports 2.4 GHz and 5 GHz wireless transmission.
• Use only within permitted frequency ranges following local laws.
• In some regions (e.g., EU), the 5 GHz band is restricted to indoor use only.

Compliance

• FCC (United States)
• CE (European Union)
• UKCA (United Kingdom)

Safety Distance

• Maintain at least 20 cm separation between the wireless device and your body to meet RF exposure limits (SAR).

FCC Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. No harmful interference caused.
2. Accepts any received interference, even if it causes undesired operation.
   • Tested as a Class B digital device to minimize residential interference.
   • May cause radio or TV interference if improperly installed.

If interference occurs:

• Reorient or relocate the receiving antenna.
• Increase distance between device and receiver.
• Plug device into a different outlet circuit.
• Consult dealer or qualified technician.

FCC Radiation Exposure Statement

This device meets FCC radiation exposure limits for uncontrolled environments.

• Antennas must maintain at least 20 cm distance from people.
• Do not co-locate or operate with other antennas/transmitters.
• Follow antenna installation guidelines carefully.

* Caution! Changes/modifications not approved by the responsible party may void user authority to operate the device.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CE Statement (European Union)This device complies with the requirements of the Radio Equipment Directive (RED) 2014/53/EU, the Low Voltage Directive (LVD) 2014/35/EU, and the Electromagnetic Compatibility Directive (EMC) 2014/30/EU.

• Operate only within permitted EU frequency bands.
• 5 GHz band (5150–5350 MHz) restricted to indoor use in EU.
• Full Declaration of Conformity available at: www.hp-projector.com/support or on request.

UKCA Statement (United Kingdom)This Device complies with The Radio Equipment Regulations 2017 and applicable electrical safety and electromagnetic compatibility requirements in the UK.

• Operate only within permitted UK frequency bands.
• 5 GHz band (5150–5350 MHz) restricted to indoor use in UK.
• Full Declaration of Conformity available at: www.hp-projector.com/support or on request.

Additional Precautions

• Use only within specified temperature and humidity ranges (see specs).
• Avoid prolonged direct eye exposure to the projection lens.
• Dispose of product according to local electronic waste regulations.

For indoor use only

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.