hp DeskJet 4100e Printer User Guide
Inductions
Remove and discard all packaging, tape, and cardboard. Close the ink access door.
Plug in and turn on the printer.
Install the required HP Smart software from 123.hp.com or your app store on a computer or mobile device.
Follow instructions in HP Smart to connect the printer to a network and activate HP+ features.
If connecting the printer to Wi-Fi, your computer or mobile device must be near the printer during setup. See Reference Guide for Wi-Fi troubleshooting and tips.
Get help with setup
Find setup information and videos online.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
© Copyright 2021 HP Development Company, L.P.
Documents / Resources
 | DeskJet 4100e Printer |
References
- hp.com/support/printer-setuphp.com
- User Manualmanual.tools
I have changed the ink once and now the second time and no printing is happening. i light blinking and have no clue what to do. NOT USER FRIENDLY!
Why is my HP DeskJet 4100e not printing and showing a blinking light after changing the ink cartridges?
A blinking light on your HP DeskJet 4100e after replacing ink cartridges often indicates a cartridge error or a setup issue. Please try the following steps based on the printer's manual and support guidelines:
If the light continues to blink, you can find specific diagnostic videos and live chat support at hp.com/support/printer-setup.
Read the full Q&A page